From: Rafał Miłecki Date: Thu, 31 Jul 2014 19:59:48 +0000 (+0200) Subject: b43: N-PHY: support setting custom TX power X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=8615eb2870f1a89ad551d80ef821172015af7c28;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git b43: N-PHY: support setting custom TX power Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index d17cea05a9c1..95a943326420 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -457,6 +457,7 @@ enum { #define B43_MACCTL_RADIOLOCK 0x00080000 /* Radio lock */ #define B43_MACCTL_BEACPROMISC 0x00100000 /* Beacon Promiscuous */ #define B43_MACCTL_KEEP_BADPLCP 0x00200000 /* Keep frames with bad PLCP */ +#define B43_MACCTL_PHY_LOCK 0x00200000 #define B43_MACCTL_KEEP_CTL 0x00400000 /* Keep control frames */ #define B43_MACCTL_KEEP_BAD 0x00800000 /* Keep bad frames (FCS) */ #define B43_MACCTL_PROMISC 0x01000000 /* Promiscuous mode */ diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index 57a3ab2ac4dc..cf625d8732a7 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -34,6 +34,7 @@ #include "radio_2056.h" #include "radio_2057.h" #include "main.h" +#include "ppr.h" struct nphy_txgains { u16 tx_lpf[2]; @@ -3606,16 +3607,6 @@ static void b43_nphy_iq_cal_gain_params(struct b43_wldev *dev, u16 core, * Tx and Rx **************************************************/ -static void b43_nphy_op_adjust_txpower(struct b43_wldev *dev) -{//TODO -} - -static enum b43_txpwr_result b43_nphy_op_recalc_txpower(struct b43_wldev *dev, - bool ignore_tssi) -{//TODO - return B43_TXPWR_RES_DONE; -} - /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrCtrlEnable */ static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable) { @@ -4069,6 +4060,7 @@ static void b43_nphy_tx_power_ctl_setup(struct b43_wldev *dev) s16 a1[2], b0[2], b1[2]; u8 idle[2]; + u8 ppr_max; s8 target[2]; s32 num, den, pwr; u32 regval[64]; @@ -4147,7 +4139,12 @@ static void b43_nphy_tx_power_ctl_setup(struct b43_wldev *dev) b1[0] = b1[1] = -1393; } } - /* target[0] = target[1] = nphy->tx_power_max; */ + + ppr_max = b43_ppr_get_max(dev, &nphy->tx_pwr_max_ppr); + if (ppr_max) { + target[0] = ppr_max; + target[1] = ppr_max; + } if (dev->phy.rev >= 3) { if (sprom->fem.ghz2.tssipos) @@ -5889,6 +5886,69 @@ static void b43_nphy_set_rx_core_state(struct b43_wldev *dev, u8 mask) b43_mac_enable(dev); } +static enum b43_txpwr_result b43_nphy_op_recalc_txpower(struct b43_wldev *dev, + bool ignore_tssi) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_n *nphy = dev->phy.n; + struct ieee80211_channel *channel = dev->wl->hw->conf.chandef.chan; + struct b43_ppr *ppr = &nphy->tx_pwr_max_ppr; + u8 max; /* qdBm */ + bool tx_pwr_state; + + if (nphy->tx_pwr_last_recalc_freq == channel->center_freq && + nphy->tx_pwr_last_recalc_limit == phy->desired_txpower) + return B43_TXPWR_RES_DONE; + + /* Make sure we have a clean PPR */ + b43_ppr_clear(dev, ppr); + + /* HW limitations */ + b43_ppr_load_max_from_sprom(dev, ppr, B43_BAND_2G); + + /* Regulatory & user settings */ + max = INT_TO_Q52(phy->chandef->chan->max_power); + if (phy->desired_txpower) + max = min_t(u8, max, INT_TO_Q52(phy->desired_txpower)); + b43_ppr_apply_max(dev, ppr, max); + if (b43_debug(dev, B43_DBG_XMITPOWER)) + b43dbg(dev->wl, "Calculated TX power: " Q52_FMT "\n", + Q52_ARG(b43_ppr_get_max(dev, ppr))); + + /* TODO: Enable this once we get gains working */ +#if 0 + /* Some extra gains */ + hw_gain = 6; /* N-PHY specific */ + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) + hw_gain += sprom->antenna_gain.a0; + else + hw_gain += sprom->antenna_gain.a1; + b43_ppr_add(dev, ppr, -hw_gain); +#endif + + /* Make sure we didn't go too low */ + b43_ppr_apply_min(dev, ppr, INT_TO_Q52(8)); + + /* Apply */ + tx_pwr_state = nphy->txpwrctrl; + b43_mac_suspend(dev); + b43_nphy_tx_power_ctl_setup(dev); + if (dev->dev->core_rev == 11 || dev->dev->core_rev == 12) { + b43_maskset32(dev, B43_MMIO_MACCTL, ~0, B43_MACCTL_PHY_LOCK); + b43_read32(dev, B43_MMIO_MACCTL); + udelay(1); + } + b43_nphy_tx_power_ctrl(dev, nphy->txpwrctrl); + if (dev->dev->core_rev == 11 || dev->dev->core_rev == 12) + b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_PHY_LOCK, 0); + b43_mac_enable(dev); + + nphy->tx_pwr_last_recalc_freq = channel->center_freq; + nphy->tx_pwr_last_recalc_limit = phy->desired_txpower; + + return B43_TXPWR_RES_DONE; +} + /************************************************** * N-PHY init **************************************************/ @@ -6422,6 +6482,7 @@ static int b43_nphy_op_allocate(struct b43_wldev *dev) nphy = kzalloc(sizeof(*nphy), GFP_KERNEL); if (!nphy) return -ENOMEM; + dev->phy.n = nphy; return 0; @@ -6662,5 +6723,4 @@ const struct b43_phy_operations b43_phyops_n = { .switch_channel = b43_nphy_op_switch_channel, .get_default_chan = b43_nphy_op_get_default_chan, .recalc_txpower = b43_nphy_op_recalc_txpower, - .adjust_txpower = b43_nphy_op_adjust_txpower, }; diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h index 30bec815b969..a6da2c31a99c 100644 --- a/drivers/net/wireless/b43/phy_n.h +++ b/drivers/net/wireless/b43/phy_n.h @@ -2,6 +2,7 @@ #define B43_NPHY_H_ #include "phy_common.h" +#include "ppr.h" /* N-PHY registers. */ @@ -967,6 +968,9 @@ struct b43_phy_n { struct b43_phy_n_txpwrindex txpwrindex[2]; struct b43_phy_n_pwr_ctl_info pwr_ctl_info[2]; struct b43_chanspec txiqlocal_chanspec; + struct b43_ppr tx_pwr_max_ppr; + u16 tx_pwr_last_recalc_freq; + int tx_pwr_last_recalc_limit; u8 txrx_chain; u16 tx_rx_cal_phy_saveregs[11];