From: Mike Rapoport Date: Wed, 10 Feb 2016 16:34:04 +0000 (+0200) Subject: staging: sm750fb: share common bits in display control registers X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=85e4db5347a96560928d2995a2cd05f10b856d5e;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git staging: sm750fb: share common bits in display control registers The display control registers for primary and secondary display share some of the bits and those bits can be defined in a single place and then used for manipulations of the relevant registers. Signed-off-by: Mike Rapoport Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c index 2d1128fc7b5a..0031e32b8cbe 100644 --- a/drivers/staging/sm750fb/ddk750_chip.c +++ b/drivers/staging/sm750fb/ddk750_chip.c @@ -249,17 +249,17 @@ int ddk750_initHw(initchip_param_t *pInitParam) /* Disable Overlay, if a former application left it on */ reg = PEEK32(VIDEO_DISPLAY_CTRL); - reg = FIELD_SET(reg, VIDEO_DISPLAY_CTRL, PLANE, DISABLE); + reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, DISABLE); POKE32(VIDEO_DISPLAY_CTRL, reg); /* Disable video alpha, if a former application left it on */ reg = PEEK32(VIDEO_ALPHA_DISPLAY_CTRL); - reg = FIELD_SET(reg, VIDEO_ALPHA_DISPLAY_CTRL, PLANE, DISABLE); + reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, DISABLE); POKE32(VIDEO_ALPHA_DISPLAY_CTRL, reg); /* Disable alpha plane, if a former application left it on */ reg = PEEK32(ALPHA_DISPLAY_CTRL); - reg = FIELD_SET(reg, ALPHA_DISPLAY_CTRL, PLANE, DISABLE); + reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, DISABLE); POKE32(ALPHA_DISPLAY_CTRL, reg); /* Disable DMA Channel, if a former application left it on */ diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c index dc7060e28e22..42da3cd0dcdb 100644 --- a/drivers/staging/sm750fb/ddk750_display.c +++ b/drivers/staging/sm750fb/ddk750_display.c @@ -23,12 +23,10 @@ static void setDisplayControl(int ctrl, int disp_state) * because changing at the same time does not guarantee that * the plane will also enabled or disabled. */ - reg = FIELD_SET(reg, - PANEL_DISPLAY_CTRL, TIMING, ENABLE); + reg = FIELD_SET(reg, DISPLAY_CTRL, TIMING, ENABLE); POKE32(PANEL_DISPLAY_CTRL, reg); - reg = FIELD_SET(reg, - PANEL_DISPLAY_CTRL, PLANE, ENABLE); + reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, ENABLE); /* Added some masks to mask out the reserved bits. * Sometimes, the reserved bits are set/reset randomly when @@ -57,12 +55,10 @@ static void setDisplayControl(int ctrl, int disp_state) * next vertical sync. Need to find out if it is necessary to * wait for 1 vsync before modifying the timing enable bit. * */ - reg = FIELD_SET(reg, - PANEL_DISPLAY_CTRL, PLANE, DISABLE); + reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, DISABLE); POKE32(PANEL_DISPLAY_CTRL, reg); - reg = FIELD_SET(reg, - PANEL_DISPLAY_CTRL, TIMING, DISABLE); + reg = FIELD_SET(reg, DISPLAY_CTRL, TIMING, DISABLE); POKE32(PANEL_DISPLAY_CTRL, reg); } @@ -74,12 +70,10 @@ static void setDisplayControl(int ctrl, int disp_state) /* Timing should be enabled first before enabling the plane because changing at the same time does not guarantee that the plane will also enabled or disabled. */ - reg = FIELD_SET(reg, - CRT_DISPLAY_CTRL, TIMING, ENABLE); + reg = FIELD_SET(reg, DISPLAY_CTRL, TIMING, ENABLE); POKE32(CRT_DISPLAY_CTRL, reg); - reg = FIELD_SET(reg, - CRT_DISPLAY_CTRL, PLANE, ENABLE); + reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, ENABLE); /* Added some masks to mask out the reserved bits. * Sometimes, the reserved bits are set/reset randomly when @@ -106,12 +100,10 @@ static void setDisplayControl(int ctrl, int disp_state) * vertical sync. Need to find out if it is necessary to * wait for 1 vsync before modifying the timing enable bit. */ - reg = FIELD_SET(reg, - CRT_DISPLAY_CTRL, PLANE, DISABLE); + reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, DISABLE); POKE32(CRT_DISPLAY_CTRL, reg); - reg = FIELD_SET(reg, - CRT_DISPLAY_CTRL, TIMING, DISABLE); + reg = FIELD_SET(reg, DISPLAY_CTRL, TIMING, DISABLE); POKE32(CRT_DISPLAY_CTRL, reg); } } @@ -127,8 +119,9 @@ static void waitNextVerticalSync(int ctrl, int delay) /* Do not wait when the Primary PLL is off or display control is already off. This will prevent the software to wait forever. */ if (!(PEEK32(PANEL_PLL_CTRL) & PLL_CTRL_POWER) || - (FIELD_GET(PEEK32(PANEL_DISPLAY_CTRL), PANEL_DISPLAY_CTRL, TIMING) == - PANEL_DISPLAY_CTRL_TIMING_DISABLE)) { + (FIELD_GET(PEEK32(PANEL_DISPLAY_CTRL), + DISPLAY_CTRL, TIMING) == + DISPLAY_CTRL_TIMING_DISABLE)) { return; } @@ -149,8 +142,9 @@ static void waitNextVerticalSync(int ctrl, int delay) /* Do not wait when the Primary PLL is off or display control is already off. This will prevent the software to wait forever. */ if (!(PEEK32(CRT_PLL_CTRL) & PLL_CTRL_POWER) || - (FIELD_GET(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, TIMING) == - CRT_DISPLAY_CTRL_TIMING_DISABLE)) { + (FIELD_GET(PEEK32(CRT_DISPLAY_CTRL), + DISPLAY_CTRL, TIMING) == + DISPLAY_CTRL_TIMING_DISABLE)) { return; } diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c index e7fc2391c856..f81e05323875 100644 --- a/drivers/staging/sm750fb/ddk750_mode.c +++ b/drivers/staging/sm750fb/ddk750_mode.c @@ -65,7 +65,8 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam, dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, RGBBIT, 24BIT); /* Set bit 14 of display controller */ - dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLOCK_PHASE, ACTIVE_LOW); + dispControl = FIELD_SET(dispControl, DISPLAY_CTRL, CLOCK_PHASE, + ACTIVE_LOW); POKE32(CRT_DISPLAY_CTRL, dispControl); @@ -101,21 +102,22 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll) | FIELD_VALUE(0, CRT_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1)); - tmp = FIELD_VALUE(0, CRT_DISPLAY_CTRL, VSYNC_PHASE, + tmp = FIELD_VALUE(0, DISPLAY_CTRL, VSYNC_PHASE, pModeParam->vertical_sync_polarity) | - FIELD_VALUE(0, CRT_DISPLAY_CTRL, HSYNC_PHASE, pModeParam->horizontal_sync_polarity) | - FIELD_SET(0, CRT_DISPLAY_CTRL, TIMING, ENABLE) | - FIELD_SET(0, CRT_DISPLAY_CTRL, PLANE, ENABLE); + FIELD_VALUE(0, DISPLAY_CTRL, HSYNC_PHASE, + pModeParam->horizontal_sync_polarity) | + FIELD_SET(0, DISPLAY_CTRL, TIMING, ENABLE) | + FIELD_SET(0, DISPLAY_CTRL, PLANE, ENABLE); if (getChipType() == SM750LE) { displayControlAdjust_SM750LE(pModeParam, tmp); } else { reg = PEEK32(CRT_DISPLAY_CTRL) - & FIELD_CLEAR(CRT_DISPLAY_CTRL, VSYNC_PHASE) - & FIELD_CLEAR(CRT_DISPLAY_CTRL, HSYNC_PHASE) - & FIELD_CLEAR(CRT_DISPLAY_CTRL, TIMING) - & FIELD_CLEAR(CRT_DISPLAY_CTRL, PLANE); + & FIELD_CLEAR(DISPLAY_CTRL, VSYNC_PHASE) + & FIELD_CLEAR(DISPLAY_CTRL, HSYNC_PHASE) + & FIELD_CLEAR(DISPLAY_CTRL, TIMING) + & FIELD_CLEAR(DISPLAY_CTRL, PLANE); POKE32(CRT_DISPLAY_CTRL, tmp | reg); } @@ -141,12 +143,14 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll) FIELD_VALUE(0, PANEL_VERTICAL_SYNC, HEIGHT, pModeParam->vertical_sync_height) | FIELD_VALUE(0, PANEL_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1)); - tmp = FIELD_VALUE(0, PANEL_DISPLAY_CTRL, VSYNC_PHASE, + tmp = FIELD_VALUE(0, DISPLAY_CTRL, VSYNC_PHASE, pModeParam->vertical_sync_polarity) | - FIELD_VALUE(0, PANEL_DISPLAY_CTRL, HSYNC_PHASE, pModeParam->horizontal_sync_polarity) | - FIELD_VALUE(0, PANEL_DISPLAY_CTRL, CLOCK_PHASE, pModeParam->clock_phase_polarity) | - FIELD_SET(0, PANEL_DISPLAY_CTRL, TIMING, ENABLE) | - FIELD_SET(0, PANEL_DISPLAY_CTRL, PLANE, ENABLE); + FIELD_VALUE(0, DISPLAY_CTRL, HSYNC_PHASE, + pModeParam->horizontal_sync_polarity) | + FIELD_VALUE(0, DISPLAY_CTRL, CLOCK_PHASE, + pModeParam->clock_phase_polarity) | + FIELD_SET(0, DISPLAY_CTRL, TIMING, ENABLE) | + FIELD_SET(0, DISPLAY_CTRL, PLANE, ENABLE); reserved = FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_1_MASK, ENABLE) | @@ -155,11 +159,11 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll) FIELD_SET(0, PANEL_DISPLAY_CTRL, VSYNC, ACTIVE_LOW); reg = (PEEK32(PANEL_DISPLAY_CTRL) & ~reserved) - & FIELD_CLEAR(PANEL_DISPLAY_CTRL, CLOCK_PHASE) - & FIELD_CLEAR(PANEL_DISPLAY_CTRL, VSYNC_PHASE) - & FIELD_CLEAR(PANEL_DISPLAY_CTRL, HSYNC_PHASE) - & FIELD_CLEAR(PANEL_DISPLAY_CTRL, TIMING) - & FIELD_CLEAR(PANEL_DISPLAY_CTRL, PLANE); + & FIELD_CLEAR(DISPLAY_CTRL, CLOCK_PHASE) + & FIELD_CLEAR(DISPLAY_CTRL, VSYNC_PHASE) + & FIELD_CLEAR(DISPLAY_CTRL, HSYNC_PHASE) + & FIELD_CLEAR(DISPLAY_CTRL, TIMING) + & FIELD_CLEAR(DISPLAY_CTRL, PLANE); /* May a hardware bug or just my test chip (not confirmed). diff --git a/drivers/staging/sm750fb/ddk750_reg.h b/drivers/staging/sm750fb/ddk750_reg.h index d1e7fc4d50df..4d66f6127207 100644 --- a/drivers/staging/sm750fb/ddk750_reg.h +++ b/drivers/staging/sm750fb/ddk750_reg.h @@ -825,15 +825,15 @@ #define PANEL_DISPLAY_CTRL_RESERVED_3_MASK 15:15 #define PANEL_DISPLAY_CTRL_RESERVED_3_MASK_DISABLE 0 #define PANEL_DISPLAY_CTRL_RESERVED_3_MASK_ENABLE 1 -#define PANEL_DISPLAY_CTRL_CLOCK_PHASE 14:14 -#define PANEL_DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_HIGH 0 -#define PANEL_DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_LOW 1 -#define PANEL_DISPLAY_CTRL_VSYNC_PHASE 13:13 -#define PANEL_DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_HIGH 0 -#define PANEL_DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_LOW 1 -#define PANEL_DISPLAY_CTRL_HSYNC_PHASE 12:12 -#define PANEL_DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_HIGH 0 -#define PANEL_DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_LOW 1 +#define DISPLAY_CTRL_CLOCK_PHASE 14:14 +#define DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_HIGH 0 +#define DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_LOW 1 +#define DISPLAY_CTRL_VSYNC_PHASE 13:13 +#define DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_HIGH 0 +#define DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_LOW 1 +#define DISPLAY_CTRL_HSYNC_PHASE 12:12 +#define DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_HIGH 0 +#define DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_LOW 1 #define PANEL_DISPLAY_CTRL_VSYNC 11:11 #define PANEL_DISPLAY_CTRL_VSYNC_ACTIVE_HIGH 0 #define PANEL_DISPLAY_CTRL_VSYNC_ACTIVE_LOW 1 @@ -843,9 +843,9 @@ #define PANEL_DISPLAY_CTRL_COLOR_KEY 9:9 #define PANEL_DISPLAY_CTRL_COLOR_KEY_DISABLE 0 #define PANEL_DISPLAY_CTRL_COLOR_KEY_ENABLE 1 -#define PANEL_DISPLAY_CTRL_TIMING 8:8 -#define PANEL_DISPLAY_CTRL_TIMING_DISABLE 0 -#define PANEL_DISPLAY_CTRL_TIMING_ENABLE 1 +#define DISPLAY_CTRL_TIMING 8:8 +#define DISPLAY_CTRL_TIMING_DISABLE 0 +#define DISPLAY_CTRL_TIMING_ENABLE 1 #define PANEL_DISPLAY_CTRL_VERTICAL_PAN_DIR 7:7 #define PANEL_DISPLAY_CTRL_VERTICAL_PAN_DIR_DOWN 0 #define PANEL_DISPLAY_CTRL_VERTICAL_PAN_DIR_UP 1 @@ -858,12 +858,12 @@ #define PANEL_DISPLAY_CTRL_HORIZONTAL_PAN 4:4 #define PANEL_DISPLAY_CTRL_HORIZONTAL_PAN_DISABLE 0 #define PANEL_DISPLAY_CTRL_HORIZONTAL_PAN_ENABLE 1 -#define PANEL_DISPLAY_CTRL_GAMMA 3:3 -#define PANEL_DISPLAY_CTRL_GAMMA_DISABLE 0 -#define PANEL_DISPLAY_CTRL_GAMMA_ENABLE 1 -#define PANEL_DISPLAY_CTRL_PLANE 2:2 -#define PANEL_DISPLAY_CTRL_PLANE_DISABLE 0 -#define PANEL_DISPLAY_CTRL_PLANE_ENABLE 1 +#define DISPLAY_CTRL_GAMMA 3:3 +#define DISPLAY_CTRL_GAMMA_DISABLE 0 +#define DISPLAY_CTRL_GAMMA_ENABLE 1 +#define DISPLAY_CTRL_PLANE 2:2 +#define DISPLAY_CTRL_PLANE_DISABLE 0 +#define DISPLAY_CTRL_PLANE_ENABLE 1 #define PANEL_DISPLAY_CTRL_FORMAT 1:0 #define PANEL_DISPLAY_CTRL_FORMAT_8 0 #define PANEL_DISPLAY_CTRL_FORMAT_16 1 @@ -966,9 +966,6 @@ #define VIDEO_DISPLAY_CTRL_GAMMA 3:3 #define VIDEO_DISPLAY_CTRL_GAMMA_DISABLE 0 #define VIDEO_DISPLAY_CTRL_GAMMA_ENABLE 1 -#define VIDEO_DISPLAY_CTRL_PLANE 2:2 -#define VIDEO_DISPLAY_CTRL_PLANE_DISABLE 0 -#define VIDEO_DISPLAY_CTRL_PLANE_ENABLE 1 #define VIDEO_DISPLAY_CTRL_FORMAT 1:0 #define VIDEO_DISPLAY_CTRL_FORMAT_8 0 #define VIDEO_DISPLAY_CTRL_FORMAT_16 1 @@ -1065,9 +1062,6 @@ #define VIDEO_ALPHA_DISPLAY_CTRL_CHROMA_KEY 3:3 #define VIDEO_ALPHA_DISPLAY_CTRL_CHROMA_KEY_DISABLE 0 #define VIDEO_ALPHA_DISPLAY_CTRL_CHROMA_KEY_ENABLE 1 -#define VIDEO_ALPHA_DISPLAY_CTRL_PLANE 2:2 -#define VIDEO_ALPHA_DISPLAY_CTRL_PLANE_DISABLE 0 -#define VIDEO_ALPHA_DISPLAY_CTRL_PLANE_ENABLE 1 #define VIDEO_ALPHA_DISPLAY_CTRL_FORMAT 1:0 #define VIDEO_ALPHA_DISPLAY_CTRL_FORMAT_8 0 #define VIDEO_ALPHA_DISPLAY_CTRL_FORMAT_16 1 @@ -1258,9 +1252,6 @@ #define ALPHA_DISPLAY_CTRL_CHROMA_KEY 3:3 #define ALPHA_DISPLAY_CTRL_CHROMA_KEY_DISABLE 0 #define ALPHA_DISPLAY_CTRL_CHROMA_KEY_ENABLE 1 -#define ALPHA_DISPLAY_CTRL_PLANE 2:2 -#define ALPHA_DISPLAY_CTRL_PLANE_DISABLE 0 -#define ALPHA_DISPLAY_CTRL_PLANE_ENABLE 1 #define ALPHA_DISPLAY_CTRL_FORMAT 1:0 #define ALPHA_DISPLAY_CTRL_FORMAT_16 1 #define ALPHA_DISPLAY_CTRL_FORMAT_ALPHA_4_4 2 @@ -1448,28 +1439,10 @@ #define CRT_DISPLAY_CTRL_FIFO_3 1 #define CRT_DISPLAY_CTRL_FIFO_7 2 #define CRT_DISPLAY_CTRL_FIFO_11 3 -#define CRT_DISPLAY_CTRL_CLOCK_PHASE 14:14 -#define CRT_DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_HIGH 0 -#define CRT_DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_LOW 1 -#define CRT_DISPLAY_CTRL_VSYNC_PHASE 13:13 -#define CRT_DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_HIGH 0 -#define CRT_DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_LOW 1 -#define CRT_DISPLAY_CTRL_HSYNC_PHASE 12:12 -#define CRT_DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_HIGH 0 -#define CRT_DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_LOW 1 #define CRT_DISPLAY_CTRL_BLANK 10:10 #define CRT_DISPLAY_CTRL_BLANK_OFF 0 #define CRT_DISPLAY_CTRL_BLANK_ON 1 -#define CRT_DISPLAY_CTRL_TIMING 8:8 -#define CRT_DISPLAY_CTRL_TIMING_DISABLE 0 -#define CRT_DISPLAY_CTRL_TIMING_ENABLE 1 #define CRT_DISPLAY_CTRL_PIXEL 7:4 -#define CRT_DISPLAY_CTRL_GAMMA 3:3 -#define CRT_DISPLAY_CTRL_GAMMA_DISABLE 0 -#define CRT_DISPLAY_CTRL_GAMMA_ENABLE 1 -#define CRT_DISPLAY_CTRL_PLANE 2:2 -#define CRT_DISPLAY_CTRL_PLANE_DISABLE 0 -#define CRT_DISPLAY_CTRL_PLANE_ENABLE 1 #define CRT_DISPLAY_CTRL_FORMAT 1:0 #define CRT_DISPLAY_CTRL_FORMAT_8 0 #define CRT_DISPLAY_CTRL_FORMAT_16 1