From: Lennert Buytenhek Date: Tue, 12 Jan 2010 12:48:56 +0000 (+0100) Subject: mwl8k: properly set receive status rate index on 5 GHz receive X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=854783444bab0024556c0aefdb0a860f2f1da286;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git mwl8k: properly set receive status rate index on 5 GHz receive The mwl8k firmware uses indices into the 2.4 GHz band rate table for the receive descriptor channel field even if the packet was received on a 5 GHz channel, while mac80211 expects an index into the 5 GHz band rate table when packets are received on the 5 GHz band, which presents a mismatch as the 5 GHz band rate table lacks the five non-OFDM rates that the 2.4 GHz rate table starts with. To handle this properly, we need to substract 5 from the rate index field if the packet was received on a 5 GHz channel (and was not received at an MCS rate). Signed-off-by: Lennert Buytenhek Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 13dded49323e..cc2ce61b7992 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -759,7 +759,13 @@ mwl8k_rxd_8366_ap_process(void *_rxd, struct ieee80211_rx_status *status, } } - status->band = IEEE80211_BAND_2GHZ; + if (rxd->channel > 14) { + status->band = IEEE80211_BAND_5GHZ; + if (!(status->flag & RX_FLAG_HT)) + status->rate_idx -= 5; + } else { + status->band = IEEE80211_BAND_2GHZ; + } status->freq = ieee80211_channel_to_frequency(rxd->channel); *qos = rxd->qos_control; @@ -850,7 +856,13 @@ mwl8k_rxd_sta_process(void *_rxd, struct ieee80211_rx_status *status, if (rate_info & MWL8K_STA_RATE_INFO_MCS_FORMAT) status->flag |= RX_FLAG_HT; - status->band = IEEE80211_BAND_2GHZ; + if (rxd->channel > 14) { + status->band = IEEE80211_BAND_5GHZ; + if (!(status->flag & RX_FLAG_HT)) + status->rate_idx -= 5; + } else { + status->band = IEEE80211_BAND_2GHZ; + } status->freq = ieee80211_channel_to_frequency(rxd->channel); *qos = rxd->qos_control;