From: Johannes Berg Date: Tue, 11 Nov 2014 11:48:42 +0000 (+0100) Subject: mac80211: move U-APSD enablement to vif flags X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=848955ccf0bdf42fff33e021a76f6daec98fe59b;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git mac80211: move U-APSD enablement to vif flags In order to let drivers have more dynamic U-APSD support, move the enablement flag to the virtual interface driver flags. This lets drivers not only set it up differently for different interfaces, but also enable/disable on the fly if needed. Signed-off-by: Johannes Berg --- diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index c4005670cba2..2619db1e3e74 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -2871,6 +2871,8 @@ static int ath10k_add_interface(struct ieee80211_hw *hw, int bit; u32 vdev_param; + vif->driver_flags |= IEEE80211_VIF_SUPPORTS_UAPSD; + mutex_lock(&ar->conf_mutex); memset(arvif, 0, sizeof(*arvif)); @@ -5024,7 +5026,6 @@ int ath10k_mac_register(struct ath10k *ar) ar->hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS | - IEEE80211_HW_SUPPORTS_UAPSD | IEEE80211_HW_MFP_CAPABLE | IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_HAS_RATE_CONTROL | diff --git a/drivers/net/wireless/cw1200/main.c b/drivers/net/wireless/cw1200/main.c index 3e78cc3ccb78..0da6e423da63 100644 --- a/drivers/net/wireless/cw1200/main.c +++ b/drivers/net/wireless/cw1200/main.c @@ -282,7 +282,6 @@ static struct ieee80211_hw *cw1200_init_common(const u8 *macaddr, IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS | IEEE80211_HW_REPORTS_TX_ACK_STATUS | - IEEE80211_HW_SUPPORTS_UAPSD | IEEE80211_HW_CONNECTION_MONITOR | IEEE80211_HW_AMPDU_AGGREGATION | IEEE80211_HW_TX_AMPDU_SETUP_IN_HW | diff --git a/drivers/net/wireless/cw1200/sta.c b/drivers/net/wireless/cw1200/sta.c index 5b84664db13b..a1e3237c0be8 100644 --- a/drivers/net/wireless/cw1200/sta.c +++ b/drivers/net/wireless/cw1200/sta.c @@ -213,6 +213,7 @@ int cw1200_add_interface(struct ieee80211_hw *dev, /* __le32 auto_calibration_mode = __cpu_to_le32(1); */ vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER | + IEEE80211_VIF_SUPPORTS_UAPSD | IEEE80211_VIF_SUPPORTS_CQM_RSSI; mutex_lock(&priv->conf_mutex); diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 31a5b3f4266c..346331d3c696 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -326,6 +326,8 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) hw->radiotap_vht_details |= IEEE80211_RADIOTAP_VHT_KNOWN_STBC | IEEE80211_RADIOTAP_VHT_KNOWN_BEAMFORMED; hw->rate_control_algorithm = "iwl-mvm-rs"; + hw->uapsd_queues = IWL_MVM_UAPSD_QUEUES; + hw->uapsd_max_sp_len = IWL_UAPSD_MAX_SP; /* * Enable 11w if advertised by firmware and software crypto @@ -336,13 +338,6 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) !iwlwifi_mod_params.sw_crypto) hw->flags |= IEEE80211_HW_MFP_CAPABLE; - if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT && - !iwlwifi_mod_params.uapsd_disable) { - hw->flags |= IEEE80211_HW_SUPPORTS_UAPSD; - hw->uapsd_queues = IWL_MVM_UAPSD_QUEUES; - hw->uapsd_max_sp_len = IWL_UAPSD_MAX_SP; - } - if (mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LMAC_SCAN || mvm->fw->ucode_capa.capa[0] & IWL_UCODE_TLV_CAPA_UMAC_SCAN) { hw->flags |= IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS; @@ -1147,6 +1142,10 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, mvm->bf_allowed_vif = mvmvif; vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER | IEEE80211_VIF_SUPPORTS_CQM_RSSI; + if (mvm->fw->ucode_capa.flags & + IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT && + !iwlwifi_mod_params.uapsd_disable) + vif->driver_flags |= IEEE80211_VIF_SUPPORTS_UAPSD; } /* diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c index 0b30a7b4d663..d4ba009ac9aa 100644 --- a/drivers/net/wireless/ti/wl1251/main.c +++ b/drivers/net/wireless/ti/wl1251/main.c @@ -500,6 +500,7 @@ static int wl1251_op_add_interface(struct ieee80211_hw *hw, int ret = 0; vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER | + IEEE80211_VIF_SUPPORTS_UAPSD | IEEE80211_VIF_SUPPORTS_CQM_RSSI; wl1251_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM", @@ -1480,9 +1481,7 @@ int wl1251_init_ieee80211(struct wl1251 *wl) /* unit us */ /* FIXME: find a proper value */ - wl->hw->flags = IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_SUPPORTS_UAPSD; + wl->hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SUPPORTS_PS; wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 6ad3fcedab9b..2a99456b6b8f 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2508,6 +2508,7 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw, } vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER | + IEEE80211_VIF_SUPPORTS_UAPSD | IEEE80211_VIF_SUPPORTS_CQM_RSSI; wl1271_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM", @@ -5776,7 +5777,6 @@ static int wl1271_init_ieee80211(struct wl1271 *wl) wl->hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS | - IEEE80211_HW_SUPPORTS_UAPSD | IEEE80211_HW_HAS_RATE_CONTROL | IEEE80211_HW_CONNECTION_MONITOR | IEEE80211_HW_REPORTS_TX_ACK_STATUS | diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b24ef577aed9..4913c00539fb 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1187,10 +1187,15 @@ struct ieee80211_channel_switch { * monitoring on this virtual interface -- i.e. it can monitor * connection quality related parameters, such as the RSSI level and * provide notifications if configured trigger levels are reached. + * @IEEE80211_VIF_SUPPORTS_UAPSD: The device can do U-APSD for this + * interface. This flag should be set during interface addition, + * but may be set/cleared as late as authentication to an AP. It is + * only valid for managed/station mode interfaces. */ enum ieee80211_vif_flags { IEEE80211_VIF_BEACON_FILTER = BIT(0), IEEE80211_VIF_SUPPORTS_CQM_RSSI = BIT(1), + IEEE80211_VIF_SUPPORTS_UAPSD = BIT(2), }; /** @@ -1589,11 +1594,6 @@ struct ieee80211_tx_control { * @IEEE80211_HW_MFP_CAPABLE: * Hardware supports management frame protection (MFP, IEEE 802.11w). * - * @IEEE80211_HW_SUPPORTS_UAPSD: - * Hardware supports Unscheduled Automatic Power Save Delivery - * (U-APSD) in managed mode. The mode is configured with - * conf_tx() operation. - * * @IEEE80211_HW_REPORTS_TX_ACK_STATUS: * Hardware can provide ack status reports of Tx frames to * the stack. @@ -1679,8 +1679,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_MFP_CAPABLE = 1<<13, IEEE80211_HW_WANT_MONITOR_VIF = 1<<14, IEEE80211_HW_NO_AUTO_VIF = 1<<15, - /* free slot */ - IEEE80211_HW_SUPPORTS_UAPSD = 1<<17, + /* free slots */ IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18, IEEE80211_HW_CONNECTION_MONITOR = 1<<19, IEEE80211_HW_QUEUE_CONTROL = 1<<20, @@ -2032,7 +2031,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * enabled whenever user has enabled powersave. * * Driver informs U-APSD client support by enabling - * %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the + * %IEEE80211_VIF_SUPPORTS_UAPSD flag. The mode is configured through the * uapsd parameter in conf_tx() operation. Hardware needs to send the QoS * Nullfunc frames and stay awake until the service period has ended. To * utilize U-APSD, dynamic powersave is disabled for voip AC and all frames diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c index 54a189f0393e..eeb0bbd69d98 100644 --- a/net/mac80211/debugfs.c +++ b/net/mac80211/debugfs.c @@ -303,8 +303,6 @@ static ssize_t hwflags_read(struct file *file, char __user *user_buf, sf += scnprintf(buf + sf, mxln - sf, "SUPPORTS_DYNAMIC_PS\n"); if (local->hw.flags & IEEE80211_HW_MFP_CAPABLE) sf += scnprintf(buf + sf, mxln - sf, "MFP_CAPABLE\n"); - if (local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD) - sf += scnprintf(buf + sf, mxln - sf, "SUPPORTS_UAPSD\n"); if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) sf += scnprintf(buf + sf, mxln - sf, "REPORTS_TX_ACK_STATUS\n"); diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 6ab99da38db9..d9ce33663c73 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -916,10 +916,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) } } - WARN((local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD) - && (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK), - "U-APSD not supported with HW_PS_NULLFUNC_STACK\n"); - /* * Calculate scan IE length -- we need this to alloc * memory and to subtract from the driver limit. It diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 75a9bf50207e..f495b800b92c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -4667,8 +4667,13 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; rcu_read_unlock(); + if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) && + (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK), + "U-APSD not supported with HW_PS_NULLFUNC_STACK\n")) + sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD; + if (bss->wmm_used && bss->uapsd_supported && - (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)) { + (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) { assoc_data->uapsd = true; ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED; } else {