From: Artem Bityutskiy Date: Fri, 3 Feb 2012 08:14:12 +0000 (+0200) Subject: mtd: spear_smi: initialize writebufsize X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=81fefdf2efa599df9e8b362bb04d5fe5a83bc353;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git mtd: spear_smi: initialize writebufsize The writebufsize concept was introduce by commit "0e4ca7e mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set writebufsize to the flash page size because it is the maximum amount of data it writes at a time. Signed-off-by: Artem Bityutskiy Acked-by: Stefan Roese Signed-off-by: David Woodhouse --- diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c index 5f4254254641..b80cb5b5ebbd 100644 --- a/drivers/mtd/devices/spear_smi.c +++ b/drivers/mtd/devices/spear_smi.c @@ -845,6 +845,7 @@ static int spear_smi_setup_banks(struct platform_device *pdev, u32 bank) flash->mtd.size = flash_info->size; flash->mtd.erasesize = flash_devices[flash_index].sectorsize; flash->page_size = flash_devices[flash_index].pagesize; + flash->mtd.writebufsize = flash->page_size; flash->erase_cmd = flash_devices[flash_index].erase_cmd; flash->mtd._erase = spear_mtd_erase; flash->mtd._read = spear_mtd_read;