From: Andy Walls Date: Mon, 9 Feb 2009 01:40:04 +0000 (-0300) Subject: V4L/DVB (10446): cx18: Finally get sliced VBI working - for 525 line 60 Hz systems... X-Git-Tag: MMI-PSA29.97-13-9~29189^2~566 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=812b1f9d54a5f75066f8a5c92166a979c48c98c6;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git V4L/DVB (10446): cx18: Finally get sliced VBI working - for 525 line 60 Hz systems at least Sliced VBI, in the manner that ivtv implements it as a separate data stream, now works for 525 line 60 Hz systems like NTSC-M. It may work for 625 line 50 Hz systems, but I have more engineering work to do, to verify it is operating properly. Sliced data insertion into the MPEG PS should be working, but is untested. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c index 1d197649446e..a3bd2c95f582 100644 --- a/drivers/media/video/cx18/cx18-av-core.c +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -172,11 +172,11 @@ static void cx18_av_initialize(struct cx18 *cx) /* * Initial VBI setup * VIP-1.1, 10 bit mode, enable Raw, disable sliced, - * don't clamp raw samples when codes are in use, 4 byte user D-words, - * programmed IDID, RP code V bit transition on VBLANK, data during + * don't clamp raw samples when codes are in use, 1 byte user D-words, + * IDID0 has line #, RP code V bit transition on VBLANK, data during * blanking intervals */ - cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4010252e); + cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4013252e); /* Set the video input. The setting in MODE_CTRL gets lost when we do the above setup */ @@ -218,6 +218,7 @@ void cx18_av_std_setup(struct cx18 *cx) cx18_av_write(cx, 0x49f, 0x14); if (std & V4L2_STD_625_50) { + /* FIXME - revisit these for Sliced VBI */ hblank = 132; hactive = 720; burst = 93; @@ -241,13 +242,34 @@ void cx18_av_std_setup(struct cx18 *cx) sc = 672351; } } else { + /* + * The following relationships of half line counts should hold: + * 525 = vsync + vactive + vblank656 + * 12 = vblank656 - vblank + * + * vsync: always 6 half-lines of vsync pulses + * vactive: half lines of active video + * vblank656: half lines, after line 3, of blanked video + * vblank: half lines, after line 9, of blanked video + * + * vblank656 starts counting from the falling edge of the first + * vsync pulse (start of line 4) + * vblank starts counting from the after the 6 vsync pulses and + * 6 equalization pulses (start of line 10) + * + * For 525 line systems the driver will extract VBI information + * from lines 10 through 21. To avoid the EAV RP code from + * toggling at the start of hblank at line 22, where sliced VBI + * data from line 21 is stuffed, also treat line 22 as blanked. + */ + vblank656 = 38; /* lines 4 through 22 */ + vblank = 26; /* lines 10 through 22 */ + vactive = 481; /* lines 23 through 262.5 */ + hactive = 720; hblank = 122; - vactive = 487; luma_lpf = 1; uv_lpf = 1; - vblank = 26; - vblank656 = 26; src_decimation = 0x21f; if (std == V4L2_STD_PAL_60) { @@ -330,14 +352,14 @@ void cx18_av_std_setup(struct cx18 *cx) cx18_av_write(cx, 0x47d, 0xff & sc >> 8); cx18_av_write(cx, 0x47e, 0xff & sc >> 16); - /* Sets VBI parameters */ if (std & V4L2_STD_625_50) { - cx18_av_write(cx, 0x47f, 0x01); - state->vbi_line_offset = 5; + state->slicer_line_delay = 1; + state->slicer_line_offset = (6 + state->slicer_line_delay - 2); } else { - cx18_av_write(cx, 0x47f, 0x00); - state->vbi_line_offset = 8; + state->slicer_line_delay = 0; + state->slicer_line_offset = (10 + state->slicer_line_delay - 2); } + cx18_av_write(cx, 0x47f, state->slicer_line_delay); } /* ----------------------------------------------------------------------- */ diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h index cf68a6039091..d83760cae540 100644 --- a/drivers/media/video/cx18/cx18-av-core.h +++ b/drivers/media/video/cx18/cx18-av-core.h @@ -79,11 +79,28 @@ struct cx18_av_state { enum cx18_av_audio_input aud_input; u32 audclk_freq; int audmode; - int vbi_line_offset; int default_volume; u32 id; u32 rev; int is_initialized; + + /* + * The VBI slicer starts operating and counting lines, begining at + * slicer line count of 1, at D lines after the deassertion of VRESET + * This staring field line, S, is 6 or 10 for 625 or 525 line systems. + * Sliced ancillary data captured on VBI slicer line M is sent at the + * beginning of the next VBI slicer line, VBI slicer line count N = M+1. + * Thus when the VBI slicer reports a VBI slicer line number with + * ancillary data, the IDID0 byte indicates VBI slicer line N. + * The actual field line that the captured data comes from is + * L = M+(S+D-1) = N-1+(S+D-1) = N + (S+D-2). + * + * D is the slicer_line_delay value programmed into register 0x47f. + * (S+D-2) is the slicer_line_offset used to convert slicer reported + * line counts to actual field lines. + */ + int slicer_line_delay; + int slicer_line_offset; }; diff --git a/drivers/media/video/cx18/cx18-av-vbi.c b/drivers/media/video/cx18/cx18-av-vbi.c index b5763372a316..43267d1afb92 100644 --- a/drivers/media/video/cx18/cx18-av-vbi.c +++ b/drivers/media/video/cx18/cx18-av-vbi.c @@ -182,7 +182,6 @@ int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg) case VIDIOC_S_FMT: { int is_pal = !(state->std & V4L2_STD_525_60); - int vbi_offset = is_pal ? 1 : 0; int i, x; u8 lcr[24]; @@ -199,7 +198,7 @@ int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg) cx18_av_std_setup(cx); /* VBI Offset */ - cx18_av_write(cx, 0x47f, vbi_offset); + cx18_av_write(cx, 0x47f, state->slicer_line_delay); cx18_av_write(cx, 0x404, 0x2e); break; } @@ -213,7 +212,7 @@ int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg) /* Sliced VBI */ cx18_av_write(cx, 0x404, 0x32); /* Ancillary data */ cx18_av_write(cx, 0x406, 0x13); - cx18_av_write(cx, 0x47f, vbi_offset); + cx18_av_write(cx, 0x47f, state->slicer_line_delay); /* Force impossible lines to 0 */ if (is_pal) { @@ -261,7 +260,8 @@ int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg) } cx18_av_write(cx, 0x43c, 0x16); - cx18_av_write(cx, 0x474, is_pal ? 0x2a : 0x22); + /* FIXME - should match vblank set in cx18_av_std_setup() */ + cx18_av_write(cx, 0x474, is_pal ? 0x2a : 26); break; } @@ -286,7 +286,7 @@ int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg) did = anc->did; sdid = anc->sdid & 0xf; l = anc->idid[0] & 0x3f; - l += state->vbi_line_offset; + l += state->slicer_line_offset; p = anc->payload; /* Decode the SDID set by the slicer */ diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 3cf8ddb633b4..2a45bbc757e8 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -633,7 +633,9 @@ static void __devinit cx18_init_struct2(struct cx18 *cx) cx->av_state.aud_input = CX18_AV_AUDIO8; cx->av_state.audclk_freq = 48000; cx->av_state.audmode = V4L2_TUNER_MODE_LANG1; - cx->av_state.vbi_line_offset = 8; + cx->av_state.slicer_line_delay = 0; + cx->av_state.slicer_line_offset = + (10 + cx->av_state.slicer_line_delay - 2); } static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *pci_dev, diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index a8dcc0f171d1..778aa0c0f9b5 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -360,9 +360,16 @@ static void cx18_vbi_setup(struct cx18_stream *s) if (raw) { lines = cx->vbi.count * 2; } else { - lines = cx->is_60hz ? 24 : 38; - if (cx->is_60hz) - lines += 2; + /* + * For 525/60 systems, according to the VIP 2 & BT.656 std: + * The EAV RP code's Field bit toggles on line 4, a few lines + * after the Vertcal Blank bit has already toggled. + * Tell the encoder to capture 21-4+1=18 lines per field, + * since we want lines 10 through 21. + * + * FIXME - revisit for 625/50 systems + */ + lines = cx->is_60hz ? (21 - 4 + 1) * 2 : 38; } data[0] = s->handle; @@ -402,9 +409,13 @@ static void cx18_vbi_setup(struct cx18_stream *s) * * Since the V bit is only allowed to toggle in the EAV RP code, * just before the first active region line, these two - * are problematic and we have to ignore them: + * are problematic: * 0x90 (Task HorizontalBlank) * 0xd0 (Task EvenField HorizontalBlank) + * + * We have set the digitzer to consider the first active line + * as part of VerticalBlank as well so we don't have to look for + * these problem codes nor lose the last line of sliced data. */ data[4] = 0xB0F0B0F0; /* diff --git a/drivers/media/video/cx18/cx18-vbi.c b/drivers/media/video/cx18/cx18-vbi.c index 52082d4a179e..8e6f4d4aff9a 100644 --- a/drivers/media/video/cx18/cx18-vbi.c +++ b/drivers/media/video/cx18/cx18-vbi.c @@ -221,13 +221,22 @@ void cx18_process_vbi_data(struct cx18 *cx, struct cx18_buffer *buf, pts = (be32_to_cpu(q[0] == 0x3fffffff)) ? be32_to_cpu(q[2]) : 0; + /* + * For calls to compress_sliced_buf(), ensure there are an integral + * number of lines by shifting the real data up over the 12 bytes header + * that got stuffed in. + * FIXME - there's a smarter way to do this with pointers, but for some + * reason I can't get it to work correctly right now. + */ + memcpy(p, &buf->buf[12], size-12); + /* first field */ - /* compress_sliced_buf() will skip the 12 bytes of header */ lines = compress_sliced_buf(cx, 0, p, size / 2, sliced_vbi_eav_rp[0]); - /* second field */ - /* experimentation shows that the second half does not always - begin at the exact address. So start a bit earlier - (hence 32). */ + /* + * second field + * In case the second half does not always begin at the exact address, + * start a bit earlier (hence 32). + */ lines = compress_sliced_buf(cx, lines, p + size / 2 - 32, size / 2 + 32, sliced_vbi_eav_rp[1]); /* always return at least one empty line */