From: Pekka Enberg Date: Wed, 8 Apr 2009 08:13:57 +0000 (+0300) Subject: Staging: w35und: move hal_init_hardware() and hal_halt() int wbusb.c X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=80767e6e1e545b5cd7e7c6962fe0e06589d48ae2;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git Staging: w35und: move hal_init_hardware() and hal_halt() int wbusb.c Impact: cleanup The hal_init_hardware() and hal_halt() functions are only used in wbusb.c so move them there. Acked-by: Pavel Machek Signed-off-by: Pekka Enberg Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/winbond/wbhal.c b/drivers/staging/winbond/wbhal.c index c985ad06523..6f1964c47bc 100644 --- a/drivers/staging/winbond/wbhal.c +++ b/drivers/staging/winbond/wbhal.c @@ -23,352 +23,6 @@ void hal_get_permanent_address( struct hw_data * pHwData, u8 *pethernet_address memcpy( pethernet_address, pHwData->PermanentMacAddress, 6 ); } -static void hal_led_control(unsigned long data) -{ - struct wbsoft_priv *adapter = (struct wbsoft_priv *) data; - struct hw_data * pHwData = &adapter->sHwData; - struct wb35_reg *reg = &pHwData->reg; - u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT; - u8 LEDgray[20] = { 0,3,4,6,8,10,11,12,13,14,15,14,13,12,11,10,8,6,4,2 }; - u8 LEDgray2[30] = { 7,8,9,10,11,12,13,14,15,0,0,0,0,0,0,0,0,0,0,0,0,0,15,14,13,12,11,10,9,8 }; - u32 TimeInterval = 500, ltmp, ltmp2; - ltmp=0; - - if( pHwData->SurpriseRemove ) return; - - if( pHwData->LED_control ) { - ltmp2 = pHwData->LED_control & 0xff; - if( ltmp2 == 5 ) // 5 is WPS mode - { - TimeInterval = 100; - ltmp2 = (pHwData->LED_control>>8) & 0xff; - switch( ltmp2 ) - { - case 1: // [0.2 On][0.1 Off]... - pHwData->LED_Blinking %= 3; - ltmp = 0x1010; // Led 1 & 0 Green and Red - if( pHwData->LED_Blinking == 2 ) // Turn off - ltmp = 0; - break; - case 2: // [0.1 On][0.1 Off]... - pHwData->LED_Blinking %= 2; - ltmp = 0x0010; // Led 0 red color - if( pHwData->LED_Blinking ) // Turn off - ltmp = 0; - break; - case 3: // [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]... - pHwData->LED_Blinking %= 15; - ltmp = 0x0010; // Led 0 red color - if( (pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking%2) ) // Turn off 0.6 sec - ltmp = 0; - break; - case 4: // [300 On][ off ] - ltmp = 0x1000; // Led 1 Green color - if( pHwData->LED_Blinking >= 3000 ) - ltmp = 0; // led maybe on after 300sec * 32bit counter overlap. - break; - } - pHwData->LED_Blinking++; - - reg->U1BC_LEDConfigure = ltmp; - if( LEDSet != 7 ) // Only 111 mode has 2 LEDs on PCB. - { - reg->U1BC_LEDConfigure |= (ltmp &0xff)<<8; // Copy LED result to each LED control register - reg->U1BC_LEDConfigure |= (ltmp &0xff00)>>8; - } - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); - } - } - else if( pHwData->CurrentRadioSw || pHwData->CurrentRadioHw ) // If radio off - { - if( reg->U1BC_LEDConfigure & 0x1010 ) - { - reg->U1BC_LEDConfigure &= ~0x1010; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); - } - } - else - { - switch( LEDSet ) - { - case 4: // [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing - if( !pHwData->LED_LinkOn ) // Blink only if not Link On - { - // Blinking if scanning is on progress - if( pHwData->LED_Scanning ) - { - if( pHwData->LED_Blinking == 0 ) - { - reg->U1BC_LEDConfigure |= 0x10; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On - pHwData->LED_Blinking = 1; - TimeInterval = 300; - } - else - { - reg->U1BC_LEDConfigure &= ~0x10; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off - pHwData->LED_Blinking = 0; - TimeInterval = 300; - } - } - else - { - //Turn Off LED_0 - if( reg->U1BC_LEDConfigure & 0x10 ) - { - reg->U1BC_LEDConfigure &= ~0x10; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off - } - } - } - else - { - // Turn On LED_0 - if( (reg->U1BC_LEDConfigure & 0x10) == 0 ) - { - reg->U1BC_LEDConfigure |= 0x10; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off - } - } - break; - - case 6: // [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing - if( !pHwData->LED_LinkOn ) // Blink only if not Link On - { - // Blinking if scanning is on progress - if( pHwData->LED_Scanning ) - { - if( pHwData->LED_Blinking == 0 ) - { - reg->U1BC_LEDConfigure &= ~0xf; - reg->U1BC_LEDConfigure |= 0x10; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On - pHwData->LED_Blinking = 1; - TimeInterval = 300; - } - else - { - reg->U1BC_LEDConfigure &= ~0x1f; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off - pHwData->LED_Blinking = 0; - TimeInterval = 300; - } - } - else - { - // 20060901 Gray blinking if in disconnect state and not scanning - ltmp = reg->U1BC_LEDConfigure; - reg->U1BC_LEDConfigure &= ~0x1f; - if( LEDgray2[(pHwData->LED_Blinking%30)] ) - { - reg->U1BC_LEDConfigure |= 0x10; - reg->U1BC_LEDConfigure |= LEDgray2[ (pHwData->LED_Blinking%30) ]; - } - pHwData->LED_Blinking++; - if( reg->U1BC_LEDConfigure != ltmp ) - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off - TimeInterval = 100; - } - } - else - { - // Turn On LED_0 - if( (reg->U1BC_LEDConfigure & 0x10) == 0 ) - { - reg->U1BC_LEDConfigure |= 0x10; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off - } - } - break; - - case 5: // [101] Only 1 Led be placed on PCB and use LED_1 for showing - if( !pHwData->LED_LinkOn ) // Blink only if not Link On - { - // Blinking if scanning is on progress - if( pHwData->LED_Scanning ) - { - if( pHwData->LED_Blinking == 0 ) - { - reg->U1BC_LEDConfigure |= 0x1000; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On - pHwData->LED_Blinking = 1; - TimeInterval = 300; - } - else - { - reg->U1BC_LEDConfigure &= ~0x1000; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off - pHwData->LED_Blinking = 0; - TimeInterval = 300; - } - } - else - { - //Turn Off LED_1 - if( reg->U1BC_LEDConfigure & 0x1000 ) - { - reg->U1BC_LEDConfigure &= ~0x1000; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off - } - } - } - else - { - // Is transmitting/receiving ?? - if( (adapter->RxByteCount != pHwData->RxByteCountLast ) || - (adapter->TxByteCount != pHwData->TxByteCountLast ) ) - { - if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 ) - { - reg->U1BC_LEDConfigure |= 0x3000; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On - } - - // Update variable - pHwData->RxByteCountLast = adapter->RxByteCount; - pHwData->TxByteCountLast = adapter->TxByteCount; - TimeInterval = 200; - } - else - { - // Turn On LED_1 and blinking if transmitting/receiving - if( (reg->U1BC_LEDConfigure & 0x3000) != 0x1000 ) - { - reg->U1BC_LEDConfigure &= ~0x3000; - reg->U1BC_LEDConfigure |= 0x1000; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On - } - } - } - break; - - default: // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active - if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 ) - { - reg->U1BC_LEDConfigure |= 0x3000;// LED_1 is always on and event enable - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); - } - - if( pHwData->LED_Blinking ) - { - // Gray blinking - reg->U1BC_LEDConfigure &= ~0x0f; - reg->U1BC_LEDConfigure |= 0x10; - reg->U1BC_LEDConfigure |= LEDgray[ (pHwData->LED_Blinking-1)%20 ]; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); - - pHwData->LED_Blinking += 2; - if( pHwData->LED_Blinking < 40 ) - TimeInterval = 100; - else - { - pHwData->LED_Blinking = 0; // Stop blinking - reg->U1BC_LEDConfigure &= ~0x0f; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); - } - break; - } - - if( pHwData->LED_LinkOn ) - { - if( !(reg->U1BC_LEDConfigure & 0x10) ) // Check the LED_0 - { - //Try to turn ON LED_0 after gray blinking - reg->U1BC_LEDConfigure |= 0x10; - pHwData->LED_Blinking = 1; //Start blinking - TimeInterval = 50; - } - } - else - { - if( reg->U1BC_LEDConfigure & 0x10 ) // Check the LED_0 - { - reg->U1BC_LEDConfigure &= ~0x10; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); - } - } - break; - } - - //20060828.1 Active send null packet to avoid AP disconnect - if( pHwData->LED_LinkOn ) - { - pHwData->NullPacketCount += TimeInterval; - if( pHwData->NullPacketCount >= DEFAULT_NULL_PACKET_COUNT ) - { - pHwData->NullPacketCount = 0; - } - } - } - - pHwData->time_count += TimeInterval; - Wb35Tx_CurrentTime(adapter, pHwData->time_count); // 20060928 add - pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(TimeInterval); - add_timer(&pHwData->LEDTimer); -} - -u8 hal_init_hardware(struct ieee80211_hw *hw) -{ - struct wbsoft_priv *priv = hw->priv; - struct hw_data * pHwData = &priv->sHwData; - u16 SoftwareSet; - - // Initial the variable - pHwData->MaxReceiveLifeTime = DEFAULT_MSDU_LIFE_TIME; // Setting Rx maximum MSDU life time - pHwData->FragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; // Setting default fragment threshold - - pHwData->InitialResource = 1; - if( Wb35Reg_initial(pHwData)) { - pHwData->InitialResource = 2; - if (Wb35Tx_initial(pHwData)) { - pHwData->InitialResource = 3; - if (Wb35Rx_initial(pHwData)) { - pHwData->InitialResource = 4; - init_timer(&pHwData->LEDTimer); - pHwData->LEDTimer.function = hal_led_control; - pHwData->LEDTimer.data = (unsigned long) priv; - pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(1000); - add_timer(&pHwData->LEDTimer); - - // - // For restrict to vendor's hardware - // - SoftwareSet = hal_software_set( pHwData ); - - #ifdef Vendor2 - // Try to make sure the EEPROM contain - SoftwareSet >>= 8; - if( SoftwareSet != 0x82 ) - return false; - #endif - - Wb35Rx_start(hw); - Wb35Tx_EP2VM_start(priv); - - return true; - } - } - } - - pHwData->SurpriseRemove = 1; - return false; -} - - -void hal_halt(struct hw_data * pHwData, void *ppa_data) -{ - switch( pHwData->InitialResource ) - { - case 4: - case 3: del_timer_sync(&pHwData->LEDTimer); - msleep(100); // Wait for Timer DPC exit 940623.2 - Wb35Rx_destroy( pHwData ); // Release the Rx - case 2: Wb35Tx_destroy( pHwData ); // Release the Tx - case 1: Wb35Reg_destroy( pHwData ); // Release the Wb35 Regisster resources - } -} - //--------------------------------------------------------------------------------------------------- void hal_set_beacon_period( struct hw_data * pHwData, u16 beacon_period ) { diff --git a/drivers/staging/winbond/wbhal_f.h b/drivers/staging/winbond/wbhal_f.h index efcaefb6aa5..d51709f7515 100644 --- a/drivers/staging/winbond/wbhal_f.h +++ b/drivers/staging/winbond/wbhal_f.h @@ -21,7 +21,6 @@ void hal_clear_all_key( struct hw_data * pHwData ); void hal_get_ethernet_address( struct hw_data * pHwData, u8 *current_address ); void hal_set_ethernet_address( struct hw_data * pHwData, u8 *current_address ); void hal_get_permanent_address( struct hw_data * pHwData, u8 *pethernet_address ); -u8 hal_init_hardware(struct ieee80211_hw *hw); void hal_set_power_save_mode( struct hw_data * pHwData, unsigned char power_save, unsigned char wakeup, unsigned char dtim ); void hal_get_power_save_mode( struct hw_data * pHwData, u8 *pin_pwr_save ); void hal_set_slot_time( struct hw_data * pHwData, u8 type ); @@ -42,7 +41,6 @@ void hal_set_accept_broadcast( struct hw_data * pHwData, u8 enable ); void hal_set_accept_multicast( struct hw_data * pHwData, u8 enable ); void hal_set_accept_beacon( struct hw_data * pHwData, u8 enable ); void hal_stop( struct hw_data * pHwData ); -void hal_halt( struct hw_data * pHwData, void *ppa_data ); void hal_start_tx0( struct hw_data * pHwData ); void hal_set_phy_type( struct hw_data * pHwData, u8 PhyType ); #define hal_get_cwmin( _A ) ( (_A)->cwmin ) diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c index 161542d0945..e91d611ad95 100644 --- a/drivers/staging/winbond/wbusb.c +++ b/drivers/staging/winbond/wbusb.c @@ -178,6 +178,351 @@ static const struct ieee80211_ops wbsoft_ops = { // conf_tx: hal_set_cwmin()/hal_set_cwmax; }; +static void hal_halt(struct hw_data *pHwData, void *ppa_data) +{ + switch( pHwData->InitialResource ) + { + case 4: + case 3: del_timer_sync(&pHwData->LEDTimer); + msleep(100); // Wait for Timer DPC exit 940623.2 + Wb35Rx_destroy( pHwData ); // Release the Rx + case 2: Wb35Tx_destroy( pHwData ); // Release the Tx + case 1: Wb35Reg_destroy( pHwData ); // Release the Wb35 Regisster resources + } +} + +static void hal_led_control(unsigned long data) +{ + struct wbsoft_priv *adapter = (struct wbsoft_priv *) data; + struct hw_data * pHwData = &adapter->sHwData; + struct wb35_reg *reg = &pHwData->reg; + u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT; + u8 LEDgray[20] = { 0,3,4,6,8,10,11,12,13,14,15,14,13,12,11,10,8,6,4,2 }; + u8 LEDgray2[30] = { 7,8,9,10,11,12,13,14,15,0,0,0,0,0,0,0,0,0,0,0,0,0,15,14,13,12,11,10,9,8 }; + u32 TimeInterval = 500, ltmp, ltmp2; + ltmp=0; + + if( pHwData->SurpriseRemove ) return; + + if( pHwData->LED_control ) { + ltmp2 = pHwData->LED_control & 0xff; + if( ltmp2 == 5 ) // 5 is WPS mode + { + TimeInterval = 100; + ltmp2 = (pHwData->LED_control>>8) & 0xff; + switch( ltmp2 ) + { + case 1: // [0.2 On][0.1 Off]... + pHwData->LED_Blinking %= 3; + ltmp = 0x1010; // Led 1 & 0 Green and Red + if( pHwData->LED_Blinking == 2 ) // Turn off + ltmp = 0; + break; + case 2: // [0.1 On][0.1 Off]... + pHwData->LED_Blinking %= 2; + ltmp = 0x0010; // Led 0 red color + if( pHwData->LED_Blinking ) // Turn off + ltmp = 0; + break; + case 3: // [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]... + pHwData->LED_Blinking %= 15; + ltmp = 0x0010; // Led 0 red color + if( (pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking%2) ) // Turn off 0.6 sec + ltmp = 0; + break; + case 4: // [300 On][ off ] + ltmp = 0x1000; // Led 1 Green color + if( pHwData->LED_Blinking >= 3000 ) + ltmp = 0; // led maybe on after 300sec * 32bit counter overlap. + break; + } + pHwData->LED_Blinking++; + + reg->U1BC_LEDConfigure = ltmp; + if( LEDSet != 7 ) // Only 111 mode has 2 LEDs on PCB. + { + reg->U1BC_LEDConfigure |= (ltmp &0xff)<<8; // Copy LED result to each LED control register + reg->U1BC_LEDConfigure |= (ltmp &0xff00)>>8; + } + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); + } + } + else if( pHwData->CurrentRadioSw || pHwData->CurrentRadioHw ) // If radio off + { + if( reg->U1BC_LEDConfigure & 0x1010 ) + { + reg->U1BC_LEDConfigure &= ~0x1010; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); + } + } + else + { + switch( LEDSet ) + { + case 4: // [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing + if( !pHwData->LED_LinkOn ) // Blink only if not Link On + { + // Blinking if scanning is on progress + if( pHwData->LED_Scanning ) + { + if( pHwData->LED_Blinking == 0 ) + { + reg->U1BC_LEDConfigure |= 0x10; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On + pHwData->LED_Blinking = 1; + TimeInterval = 300; + } + else + { + reg->U1BC_LEDConfigure &= ~0x10; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off + pHwData->LED_Blinking = 0; + TimeInterval = 300; + } + } + else + { + //Turn Off LED_0 + if( reg->U1BC_LEDConfigure & 0x10 ) + { + reg->U1BC_LEDConfigure &= ~0x10; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off + } + } + } + else + { + // Turn On LED_0 + if( (reg->U1BC_LEDConfigure & 0x10) == 0 ) + { + reg->U1BC_LEDConfigure |= 0x10; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off + } + } + break; + + case 6: // [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing + if( !pHwData->LED_LinkOn ) // Blink only if not Link On + { + // Blinking if scanning is on progress + if( pHwData->LED_Scanning ) + { + if( pHwData->LED_Blinking == 0 ) + { + reg->U1BC_LEDConfigure &= ~0xf; + reg->U1BC_LEDConfigure |= 0x10; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On + pHwData->LED_Blinking = 1; + TimeInterval = 300; + } + else + { + reg->U1BC_LEDConfigure &= ~0x1f; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off + pHwData->LED_Blinking = 0; + TimeInterval = 300; + } + } + else + { + // 20060901 Gray blinking if in disconnect state and not scanning + ltmp = reg->U1BC_LEDConfigure; + reg->U1BC_LEDConfigure &= ~0x1f; + if( LEDgray2[(pHwData->LED_Blinking%30)] ) + { + reg->U1BC_LEDConfigure |= 0x10; + reg->U1BC_LEDConfigure |= LEDgray2[ (pHwData->LED_Blinking%30) ]; + } + pHwData->LED_Blinking++; + if( reg->U1BC_LEDConfigure != ltmp ) + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off + TimeInterval = 100; + } + } + else + { + // Turn On LED_0 + if( (reg->U1BC_LEDConfigure & 0x10) == 0 ) + { + reg->U1BC_LEDConfigure |= 0x10; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off + } + } + break; + + case 5: // [101] Only 1 Led be placed on PCB and use LED_1 for showing + if( !pHwData->LED_LinkOn ) // Blink only if not Link On + { + // Blinking if scanning is on progress + if( pHwData->LED_Scanning ) + { + if( pHwData->LED_Blinking == 0 ) + { + reg->U1BC_LEDConfigure |= 0x1000; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On + pHwData->LED_Blinking = 1; + TimeInterval = 300; + } + else + { + reg->U1BC_LEDConfigure &= ~0x1000; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off + pHwData->LED_Blinking = 0; + TimeInterval = 300; + } + } + else + { + //Turn Off LED_1 + if( reg->U1BC_LEDConfigure & 0x1000 ) + { + reg->U1BC_LEDConfigure &= ~0x1000; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off + } + } + } + else + { + // Is transmitting/receiving ?? + if( (adapter->RxByteCount != pHwData->RxByteCountLast ) || + (adapter->TxByteCount != pHwData->TxByteCountLast ) ) + { + if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 ) + { + reg->U1BC_LEDConfigure |= 0x3000; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On + } + + // Update variable + pHwData->RxByteCountLast = adapter->RxByteCount; + pHwData->TxByteCountLast = adapter->TxByteCount; + TimeInterval = 200; + } + else + { + // Turn On LED_1 and blinking if transmitting/receiving + if( (reg->U1BC_LEDConfigure & 0x3000) != 0x1000 ) + { + reg->U1BC_LEDConfigure &= ~0x3000; + reg->U1BC_LEDConfigure |= 0x1000; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On + } + } + } + break; + + default: // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active + if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 ) + { + reg->U1BC_LEDConfigure |= 0x3000;// LED_1 is always on and event enable + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); + } + + if( pHwData->LED_Blinking ) + { + // Gray blinking + reg->U1BC_LEDConfigure &= ~0x0f; + reg->U1BC_LEDConfigure |= 0x10; + reg->U1BC_LEDConfigure |= LEDgray[ (pHwData->LED_Blinking-1)%20 ]; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); + + pHwData->LED_Blinking += 2; + if( pHwData->LED_Blinking < 40 ) + TimeInterval = 100; + else + { + pHwData->LED_Blinking = 0; // Stop blinking + reg->U1BC_LEDConfigure &= ~0x0f; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); + } + break; + } + + if( pHwData->LED_LinkOn ) + { + if( !(reg->U1BC_LEDConfigure & 0x10) ) // Check the LED_0 + { + //Try to turn ON LED_0 after gray blinking + reg->U1BC_LEDConfigure |= 0x10; + pHwData->LED_Blinking = 1; //Start blinking + TimeInterval = 50; + } + } + else + { + if( reg->U1BC_LEDConfigure & 0x10 ) // Check the LED_0 + { + reg->U1BC_LEDConfigure &= ~0x10; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); + } + } + break; + } + + //20060828.1 Active send null packet to avoid AP disconnect + if( pHwData->LED_LinkOn ) + { + pHwData->NullPacketCount += TimeInterval; + if( pHwData->NullPacketCount >= DEFAULT_NULL_PACKET_COUNT ) + { + pHwData->NullPacketCount = 0; + } + } + } + + pHwData->time_count += TimeInterval; + Wb35Tx_CurrentTime(adapter, pHwData->time_count); // 20060928 add + pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(TimeInterval); + add_timer(&pHwData->LEDTimer); +} + +static u8 hal_init_hardware(struct ieee80211_hw *hw) +{ + struct wbsoft_priv *priv = hw->priv; + struct hw_data * pHwData = &priv->sHwData; + u16 SoftwareSet; + + // Initial the variable + pHwData->MaxReceiveLifeTime = DEFAULT_MSDU_LIFE_TIME; // Setting Rx maximum MSDU life time + pHwData->FragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; // Setting default fragment threshold + + pHwData->InitialResource = 1; + if( Wb35Reg_initial(pHwData)) { + pHwData->InitialResource = 2; + if (Wb35Tx_initial(pHwData)) { + pHwData->InitialResource = 3; + if (Wb35Rx_initial(pHwData)) { + pHwData->InitialResource = 4; + init_timer(&pHwData->LEDTimer); + pHwData->LEDTimer.function = hal_led_control; + pHwData->LEDTimer.data = (unsigned long) priv; + pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(1000); + add_timer(&pHwData->LEDTimer); + + // + // For restrict to vendor's hardware + // + SoftwareSet = hal_software_set( pHwData ); + + #ifdef Vendor2 + // Try to make sure the EEPROM contain + SoftwareSet >>= 8; + if( SoftwareSet != 0x82 ) + return false; + #endif + + Wb35Rx_start(hw); + Wb35Tx_EP2VM_start(priv); + + return true; + } + } + } + + pHwData->SurpriseRemove = 1; + return false; +} + static int wb35_hw_init(struct ieee80211_hw *hw) { struct wbsoft_priv *priv = hw->priv;