From: Matt Weber Date: Thu, 22 Jun 2017 20:00:33 +0000 (-0500) Subject: i2c: cadance: fix ctrl/addr reg write order X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=8064c616984eaa015f018dba595d78cd24a0cc8c;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git i2c: cadance: fix ctrl/addr reg write order The driver was clearing the hold bit in the control register before writing to the address register which resulted in a stop condition being generated rather than a repeated start. This issue was only observed when a system was running much slower than a normal processor would execute. The IP data sheet mentions a ordering of writing to the address register before clearing the hold. Fixes: df8eb5691c4 ("i2c: Add driver for Cadence I2C controller") Signed-off-by: John Linn Signed-off-by: Paresh Chaudhary Signed-off-by: Matthew Weber Signed-off-by: Wolfram Sang --- diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 45d6771fac8c..75d80161931f 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -405,14 +405,14 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id) cdns_i2c_writereg(id->recv_count, CDNS_I2C_XFER_SIZE_OFFSET); } + /* Set the slave address in address register - triggers operation */ + cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK, + CDNS_I2C_ADDR_OFFSET); /* Clear the bus hold flag if bytes to receive is less than FIFO size */ if (!id->bus_hold_flag && ((id->p_msg->flags & I2C_M_RECV_LEN) != I2C_M_RECV_LEN) && (id->recv_count <= CDNS_I2C_FIFO_DEPTH)) cdns_i2c_clear_bus_hold(id); - /* Set the slave address in address register - triggers operation */ - cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK, - CDNS_I2C_ADDR_OFFSET); cdns_i2c_writereg(CDNS_I2C_ENABLED_INTR_MASK, CDNS_I2C_IER_OFFSET); }