From: Matt Porter Date: Fri, 23 Sep 2005 05:31:15 +0000 (-0700) Subject: [PATCH] EHCI, split out PCI glue X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=7ff71d6adf81a43505b7cbaa034e4063d3439182;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git [PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-) --- diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 513fccbb8e43..af3c05eb86fc 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -300,44 +300,6 @@ static void ehci_watchdog (unsigned long param) spin_unlock_irqrestore (&ehci->lock, flags); } -#ifdef CONFIG_PCI - -/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/... - * off the controller (maybe it can boot from highspeed USB disks). - */ -static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap) -{ - struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller); - - /* always say Linux will own the hardware */ - pci_write_config_byte(pdev, where + 3, 1); - - /* maybe wait a while for BIOS to respond */ - if (cap & (1 << 16)) { - int msec = 5000; - - do { - msleep(10); - msec -= 10; - pci_read_config_dword(pdev, where, &cap); - } while ((cap & (1 << 16)) && msec); - if (cap & (1 << 16)) { - ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n", - where, cap); - // some BIOS versions seem buggy... - // return 1; - ehci_warn (ehci, "continuing after BIOS bug...\n"); - /* disable all SMIs, and clear "BIOS owns" flag */ - pci_write_config_dword(pdev, where + 4, 0); - pci_write_config_byte(pdev, where + 2, 0); - } else - ehci_dbg(ehci, "BIOS handoff succeeded\n"); - } - return 0; -} - -#endif - /* Reboot notifiers kick in for silicon on any bus (not just pci, etc). * This forcibly disables dma and IRQs, helping kexec and other cases * where the next system software may expect clean state. @@ -371,156 +333,90 @@ static void ehci_port_power (struct ehci_hcd *ehci, int is_on) msleep(20); } +/*-------------------------------------------------------------------------*/ -/* called by khubd or root hub init threads */ +/* + * ehci_work is called from some interrupts, timers, and so on. + * it calls driver completion functions, after dropping ehci->lock. + */ +static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs) +{ + timer_action_done (ehci, TIMER_IO_WATCHDOG); + if (ehci->reclaim_ready) + end_unlink_async (ehci, regs); + + /* another CPU may drop ehci->lock during a schedule scan while + * it reports urb completions. this flag guards against bogus + * attempts at re-entrant schedule scanning. + */ + if (ehci->scanning) + return; + ehci->scanning = 1; + scan_async (ehci, regs); + if (ehci->next_uframe != -1) + scan_periodic (ehci, regs); + ehci->scanning = 0; + + /* the IO watchdog guards against hardware or driver bugs that + * misplace IRQs, and should let us run completely without IRQs. + * such lossage has been observed on both VT6202 and VT8235. + */ + if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) && + (ehci->async->qh_next.ptr != NULL || + ehci->periodic_sched != 0)) + timer_action (ehci, TIMER_IO_WATCHDOG); +} -static int ehci_hc_reset (struct usb_hcd *hcd) +static void ehci_stop (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - u32 temp; - unsigned count = 256/4; - spin_lock_init (&ehci->lock); + ehci_dbg (ehci, "stop\n"); - ehci->caps = hcd->regs; - ehci->regs = hcd->regs + HC_LENGTH (readl (&ehci->caps->hc_capbase)); - dbg_hcs_params (ehci, "reset"); - dbg_hcc_params (ehci, "reset"); + /* Turn off port power on all root hub ports. */ + ehci_port_power (ehci, 0); - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = readl (&ehci->caps->hcs_params); + /* no more interrupts ... */ + del_timer_sync (&ehci->watchdog); -#ifdef CONFIG_PCI - if (hcd->self.controller->bus == &pci_bus_type) { - struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + spin_lock_irq(&ehci->lock); + if (HC_IS_RUNNING (hcd->state)) + ehci_quiesce (ehci); - switch (pdev->vendor) { - case PCI_VENDOR_ID_TDI: - if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { - ehci->is_tdi_rh_tt = 1; - tdi_reset (ehci); - } - break; - case PCI_VENDOR_ID_AMD: - /* AMD8111 EHCI doesn't work, according to AMD errata */ - if (pdev->device == 0x7463) { - ehci_info (ehci, "ignoring AMD8111 (errata)\n"); - return -EIO; - } - break; - case PCI_VENDOR_ID_NVIDIA: - /* NVidia reports that certain chips don't handle - * QH, ITD, or SITD addresses above 2GB. (But TD, - * data buffer, and periodic schedule are normal.) - */ - switch (pdev->device) { - case 0x003c: /* MCP04 */ - case 0x005b: /* CK804 */ - case 0x00d8: /* CK8 */ - case 0x00e8: /* CK8S */ - if (pci_set_consistent_dma_mask(pdev, - DMA_31BIT_MASK) < 0) - ehci_warn (ehci, "can't enable NVidia " - "workaround for >2GB RAM\n"); - break; - } - break; - } + ehci_reset (ehci); + writel (0, &ehci->regs->intr_enable); + spin_unlock_irq(&ehci->lock); - /* optional debug port, normally in the first BAR */ - temp = pci_find_capability (pdev, 0x0a); - if (temp) { - pci_read_config_dword(pdev, temp, &temp); - temp >>= 16; - if ((temp & (3 << 13)) == (1 << 13)) { - temp &= 0x1fff; - ehci->debug = hcd->regs + temp; - temp = readl (&ehci->debug->control); - ehci_info (ehci, "debug port %d%s\n", - HCS_DEBUG_PORT(ehci->hcs_params), - (temp & DBGP_ENABLED) - ? " IN USE" - : ""); - if (!(temp & DBGP_ENABLED)) - ehci->debug = NULL; - } - } + /* let companion controllers work when we aren't */ + writel (0, &ehci->regs->configured_flag); + unregister_reboot_notifier (&ehci->reboot_notifier); - temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params)); - } else - temp = 0; - - /* EHCI 0.96 and later may have "extended capabilities" */ - while (temp && count--) { - u32 cap; - - pci_read_config_dword (to_pci_dev(hcd->self.controller), - temp, &cap); - ehci_dbg (ehci, "capability %04x at %02x\n", cap, temp); - switch (cap & 0xff) { - case 1: /* BIOS/SMM/... handoff */ - if (bios_handoff (ehci, temp, cap) != 0) - return -EOPNOTSUPP; - break; - case 0: /* illegal reserved capability */ - ehci_warn (ehci, "illegal capability!\n"); - cap = 0; - /* FALLTHROUGH */ - default: /* unknown */ - break; - } - temp = (cap >> 8) & 0xff; - } - if (!count) { - ehci_err (ehci, "bogus capabilities ... PCI problems!\n"); - return -EIO; - } - if (ehci_is_TDI(ehci)) - ehci_reset (ehci); -#endif + remove_debug_files (ehci); - ehci_port_power (ehci, 0); + /* root hub is shut down separately (first, when possible) */ + spin_lock_irq (&ehci->lock); + if (ehci->async) + ehci_work (ehci, NULL); + spin_unlock_irq (&ehci->lock); + ehci_mem_cleanup (ehci); - /* at least the Genesys GL880S needs fixup here */ - temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params); - temp &= 0x0f; - if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) { - ehci_dbg (ehci, "bogus port configuration: " - "cc=%d x pcc=%d < ports=%d\n", - HCS_N_CC(ehci->hcs_params), - HCS_N_PCC(ehci->hcs_params), - HCS_N_PORTS(ehci->hcs_params)); - -#ifdef CONFIG_PCI - if (hcd->self.controller->bus == &pci_bus_type) { - struct pci_dev *pdev; - - pdev = to_pci_dev(hcd->self.controller); - switch (pdev->vendor) { - case 0x17a0: /* GENESYS */ - /* GL880S: should be PORTS=2 */ - temp |= (ehci->hcs_params & ~0xf); - ehci->hcs_params = temp; - break; - case PCI_VENDOR_ID_NVIDIA: - /* NF4: should be PCC=10 */ - break; - } - } +#ifdef EHCI_STATS + ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n", + ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim, + ehci->stats.lost_iaa); + ehci_dbg (ehci, "complete %ld unlink %ld\n", + ehci->stats.complete, ehci->stats.unlink); #endif - } - /* force HC to halt state */ - return ehci_halt (ehci); + dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status)); } -static int ehci_start (struct usb_hcd *hcd) +static int ehci_run (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); u32 temp; int retval; u32 hcc_params; - u8 sbrn = 0; int first; /* skip some things on restart paths */ @@ -559,27 +455,6 @@ static int ehci_start (struct usb_hcd *hcd) } writel (ehci->periodic_dma, &ehci->regs->frame_list); -#ifdef CONFIG_PCI - if (hcd->self.controller->bus == &pci_bus_type) { - struct pci_dev *pdev; - u16 port_wake; - - pdev = to_pci_dev(hcd->self.controller); - - /* Serial Bus Release Number is at PCI 0x60 offset */ - pci_read_config_byte(pdev, 0x60, &sbrn); - - /* port wake capability, reported by boot firmware */ - pci_read_config_word(pdev, 0x62, &port_wake); - hcd->can_wakeup = (port_wake & 1) != 0; - - /* help hc dma work well with cachelines */ - retval = pci_set_mwi(pdev); - if (retval) - ehci_dbg(ehci, "unable to enable MWI - not fatal.\n"); - } -#endif - /* * dedicate a qh for the async ring head, since we couldn't unlink * a 'real' qh without stopping the async schedule [4.8]. use it @@ -675,7 +550,7 @@ static int ehci_start (struct usb_hcd *hcd) temp = HC_VERSION(readl (&ehci->caps->hc_capbase)); ehci_info (ehci, "USB %x.%x %s, EHCI %x.%02x, driver %s\n", - ((sbrn & 0xf0)>>4), (sbrn & 0x0f), + ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), first ? "initialized" : "restarted", temp >> 8, temp & 0xff, DRIVER_VERSION); @@ -687,188 +562,6 @@ static int ehci_start (struct usb_hcd *hcd) return 0; } -/* always called by thread; normally rmmod */ - -static void ehci_stop (struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci (hcd); - - ehci_dbg (ehci, "stop\n"); - - /* Turn off port power on all root hub ports. */ - ehci_port_power (ehci, 0); - - /* no more interrupts ... */ - del_timer_sync (&ehci->watchdog); - - spin_lock_irq(&ehci->lock); - if (HC_IS_RUNNING (hcd->state)) - ehci_quiesce (ehci); - - ehci_reset (ehci); - writel (0, &ehci->regs->intr_enable); - spin_unlock_irq(&ehci->lock); - - /* let companion controllers work when we aren't */ - writel (0, &ehci->regs->configured_flag); - unregister_reboot_notifier (&ehci->reboot_notifier); - - remove_debug_files (ehci); - - /* root hub is shut down separately (first, when possible) */ - spin_lock_irq (&ehci->lock); - if (ehci->async) - ehci_work (ehci, NULL); - spin_unlock_irq (&ehci->lock); - ehci_mem_cleanup (ehci); - -#ifdef EHCI_STATS - ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n", - ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim, - ehci->stats.lost_iaa); - ehci_dbg (ehci, "complete %ld unlink %ld\n", - ehci->stats.complete, ehci->stats.unlink); -#endif - - dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status)); -} - -static int ehci_get_frame (struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci (hcd); - return (readl (&ehci->regs->frame_index) >> 3) % ehci->periodic_size; -} - -/*-------------------------------------------------------------------------*/ - -#ifdef CONFIG_PM - -/* suspend/resume, section 4.3 */ - -/* These routines rely on the bus (pci, platform, etc) - * to handle powerdown and wakeup, and currently also on - * transceivers that don't need any software attention to set up - * the right sort of wakeup. - */ - -static int ehci_suspend (struct usb_hcd *hcd, pm_message_t message) -{ - struct ehci_hcd *ehci = hcd_to_ehci (hcd); - - if (time_before (jiffies, ehci->next_statechange)) - msleep (100); - -#ifdef CONFIG_USB_SUSPEND - (void) usb_suspend_device (hcd->self.root_hub); -#else - usb_lock_device (hcd->self.root_hub); - (void) ehci_hub_suspend (hcd); - usb_unlock_device (hcd->self.root_hub); -#endif - - // save (PCI) FLADJ in case of Vaux power loss - // ... we'd only use it to handle clock skew - - return 0; -} - -static int ehci_resume (struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci (hcd); - unsigned port; - struct usb_device *root = hcd->self.root_hub; - int retval = -EINVAL; - - // maybe restore (PCI) FLADJ - - if (time_before (jiffies, ehci->next_statechange)) - msleep (100); - - /* If any port is suspended (or owned by the companion), - * we know we can/must resume the HC (and mustn't reset it). - */ - for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) { - u32 status; - port--; - status = readl (&ehci->regs->port_status [port]); - if (!(status & PORT_POWER)) - continue; - if (status & (PORT_SUSPEND | PORT_OWNER)) { - down (&hcd->self.root_hub->serialize); - retval = ehci_hub_resume (hcd); - up (&hcd->self.root_hub->serialize); - break; - } - if (!root->children [port]) - continue; - dbg_port (ehci, __FUNCTION__, port + 1, status); - usb_set_device_state (root->children[port], - USB_STATE_NOTATTACHED); - } - - /* Else reset, to cope with power loss or flush-to-storage - * style "resume" having activated BIOS during reboot. - */ - if (port == 0) { - (void) ehci_halt (ehci); - (void) ehci_reset (ehci); - (void) ehci_hc_reset (hcd); - - /* emptying the schedule aborts any urbs */ - spin_lock_irq (&ehci->lock); - if (ehci->reclaim) - ehci->reclaim_ready = 1; - ehci_work (ehci, NULL); - spin_unlock_irq (&ehci->lock); - - /* restart; khubd will disconnect devices */ - retval = ehci_start (hcd); - - /* here we "know" root ports should always stay powered; - * but some controllers may lose all power. - */ - ehci_port_power (ehci, 1); - } - - return retval; -} - -#endif - -/*-------------------------------------------------------------------------*/ - -/* - * ehci_work is called from some interrupts, timers, and so on. - * it calls driver completion functions, after dropping ehci->lock. - */ -static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs) -{ - timer_action_done (ehci, TIMER_IO_WATCHDOG); - if (ehci->reclaim_ready) - end_unlink_async (ehci, regs); - - /* another CPU may drop ehci->lock during a schedule scan while - * it reports urb completions. this flag guards against bogus - * attempts at re-entrant schedule scanning. - */ - if (ehci->scanning) - return; - ehci->scanning = 1; - scan_async (ehci, regs); - if (ehci->next_uframe != -1) - scan_periodic (ehci, regs); - ehci->scanning = 0; - - /* the IO watchdog guards against hardware or driver bugs that - * misplace IRQs, and should let us run completely without IRQs. - * such lossage has been observed on both VT6202 and VT8235. - */ - if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) && - (ehci->async->qh_next.ptr != NULL || - ehci->periodic_sched != 0)) - timer_action (ehci, TIMER_IO_WATCHDOG); -} - /*-------------------------------------------------------------------------*/ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs) @@ -1179,106 +872,24 @@ done: return; } -/*-------------------------------------------------------------------------*/ - -static const struct hc_driver ehci_driver = { - .description = hcd_name, - .product_desc = "EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* - * basic lifecycle operations - */ - .reset = ehci_hc_reset, - .start = ehci_start, -#ifdef CONFIG_PM - .suspend = ehci_suspend, - .resume = ehci_resume, -#endif - .stop = ehci_stop, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .hub_suspend = ehci_hub_suspend, - .hub_resume = ehci_hub_resume, -}; +static int ehci_get_frame (struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci (hcd); + return (readl (&ehci->regs->frame_index) >> 3) % ehci->periodic_size; +} /*-------------------------------------------------------------------------*/ -/* EHCI 1.0 doesn't require PCI */ - -#ifdef CONFIG_PCI - -/* PCI driver selection metadata; PCI hotplugging uses this */ -static const struct pci_device_id pci_ids [] = { { - /* handle any USB 2.0 EHCI controller */ - PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0), - .driver_data = (unsigned long) &ehci_driver, - }, - { /* end: all zeroes */ } -}; -MODULE_DEVICE_TABLE (pci, pci_ids); - -/* pci driver glue; this is a "new style" PCI driver module */ -static struct pci_driver ehci_pci_driver = { - .name = (char *) hcd_name, - .id_table = pci_ids, - - .probe = usb_hcd_pci_probe, - .remove = usb_hcd_pci_remove, - -#ifdef CONFIG_PM - .suspend = usb_hcd_pci_suspend, - .resume = usb_hcd_pci_resume, -#endif -}; - -#endif /* PCI */ - - #define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC MODULE_DESCRIPTION (DRIVER_INFO); MODULE_AUTHOR (DRIVER_AUTHOR); MODULE_LICENSE ("GPL"); -static int __init init (void) -{ - if (usb_disabled()) - return -ENODEV; - - pr_debug ("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n", - hcd_name, - sizeof (struct ehci_qh), sizeof (struct ehci_qtd), - sizeof (struct ehci_itd), sizeof (struct ehci_sitd)); - - return pci_register_driver (&ehci_pci_driver); -} -module_init (init); +#ifdef CONFIG_PCI +#include "ehci-pci.c" +#endif -static void __exit cleanup (void) -{ - pci_unregister_driver (&ehci_pci_driver); -} -module_exit (cleanup); +#if !defined(CONFIG_PCI) +#error "missing bus glue for ehci-hcd" +#endif diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c new file mode 100644 index 000000000000..66ebf75b2037 --- /dev/null +++ b/drivers/usb/host/ehci-pci.c @@ -0,0 +1,414 @@ +/* + * EHCI HCD (Host Controller Driver) PCI Bus Glue. + * + * Copyright (c) 2000-2004 by David Brownell + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef CONFIG_PCI +#error "This file is PCI bus glue. CONFIG_PCI must be defined." +#endif + +/*-------------------------------------------------------------------------*/ + +/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/... + * off the controller (maybe it can boot from highspeed USB disks). + */ +static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap) +{ + struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller); + + /* always say Linux will own the hardware */ + pci_write_config_byte(pdev, where + 3, 1); + + /* maybe wait a while for BIOS to respond */ + if (cap & (1 << 16)) { + int msec = 5000; + + do { + msleep(10); + msec -= 10; + pci_read_config_dword(pdev, where, &cap); + } while ((cap & (1 << 16)) && msec); + if (cap & (1 << 16)) { + ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n", + where, cap); + // some BIOS versions seem buggy... + // return 1; + ehci_warn (ehci, "continuing after BIOS bug...\n"); + /* disable all SMIs, and clear "BIOS owns" flag */ + pci_write_config_dword(pdev, where + 4, 0); + pci_write_config_byte(pdev, where + 2, 0); + } else + ehci_dbg(ehci, "BIOS handoff succeeded\n"); + } + return 0; +} + +/* called by khubd or root hub init threads */ +static int ehci_pci_reset (struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci (hcd); + u32 temp; + unsigned count = 256/4; + + spin_lock_init (&ehci->lock); + + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + HC_LENGTH (readl (&ehci->caps->hc_capbase)); + dbg_hcs_params (ehci, "reset"); + dbg_hcc_params (ehci, "reset"); + + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = readl (&ehci->caps->hcs_params); + + if (hcd->self.controller->bus == &pci_bus_type) { + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + + switch (pdev->vendor) { + case PCI_VENDOR_ID_TDI: + if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { + ehci->is_tdi_rh_tt = 1; + tdi_reset (ehci); + } + break; + case PCI_VENDOR_ID_AMD: + /* AMD8111 EHCI doesn't work, according to AMD errata */ + if (pdev->device == 0x7463) { + ehci_info (ehci, "ignoring AMD8111 (errata)\n"); + return -EIO; + } + break; + case PCI_VENDOR_ID_NVIDIA: + /* NVidia reports that certain chips don't handle + * QH, ITD, or SITD addresses above 2GB. (But TD, + * data buffer, and periodic schedule are normal.) + */ + switch (pdev->device) { + case 0x003c: /* MCP04 */ + case 0x005b: /* CK804 */ + case 0x00d8: /* CK8 */ + case 0x00e8: /* CK8S */ + if (pci_set_consistent_dma_mask(pdev, + DMA_31BIT_MASK) < 0) + ehci_warn (ehci, "can't enable NVidia " + "workaround for >2GB RAM\n"); + break; + } + break; + } + + /* optional debug port, normally in the first BAR */ + temp = pci_find_capability (pdev, 0x0a); + if (temp) { + pci_read_config_dword(pdev, temp, &temp); + temp >>= 16; + if ((temp & (3 << 13)) == (1 << 13)) { + temp &= 0x1fff; + ehci->debug = hcd->regs + temp; + temp = readl (&ehci->debug->control); + ehci_info (ehci, "debug port %d%s\n", + HCS_DEBUG_PORT(ehci->hcs_params), + (temp & DBGP_ENABLED) + ? " IN USE" + : ""); + if (!(temp & DBGP_ENABLED)) + ehci->debug = NULL; + } + } + + temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params)); + } else + temp = 0; + + /* EHCI 0.96 and later may have "extended capabilities" */ + while (temp && count--) { + u32 cap; + + pci_read_config_dword (to_pci_dev(hcd->self.controller), + temp, &cap); + ehci_dbg (ehci, "capability %04x at %02x\n", cap, temp); + switch (cap & 0xff) { + case 1: /* BIOS/SMM/... handoff */ + if (bios_handoff (ehci, temp, cap) != 0) + return -EOPNOTSUPP; + break; + case 0: /* illegal reserved capability */ + ehci_warn (ehci, "illegal capability!\n"); + cap = 0; + /* FALLTHROUGH */ + default: /* unknown */ + break; + } + temp = (cap >> 8) & 0xff; + } + if (!count) { + ehci_err (ehci, "bogus capabilities ... PCI problems!\n"); + return -EIO; + } + if (ehci_is_TDI(ehci)) + ehci_reset (ehci); + + ehci_port_power (ehci, 0); + + /* at least the Genesys GL880S needs fixup here */ + temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params); + temp &= 0x0f; + if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) { + ehci_dbg (ehci, "bogus port configuration: " + "cc=%d x pcc=%d < ports=%d\n", + HCS_N_CC(ehci->hcs_params), + HCS_N_PCC(ehci->hcs_params), + HCS_N_PORTS(ehci->hcs_params)); + + if (hcd->self.controller->bus == &pci_bus_type) { + struct pci_dev *pdev; + + pdev = to_pci_dev(hcd->self.controller); + switch (pdev->vendor) { + case 0x17a0: /* GENESYS */ + /* GL880S: should be PORTS=2 */ + temp |= (ehci->hcs_params & ~0xf); + ehci->hcs_params = temp; + break; + case PCI_VENDOR_ID_NVIDIA: + /* NF4: should be PCC=10 */ + break; + } + } + } + + /* force HC to halt state */ + return ehci_halt (ehci); +} + +static int ehci_pci_start (struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci (hcd); + int result = 0; + + if (hcd->self.controller->bus == &pci_bus_type) { + struct pci_dev *pdev; + u16 port_wake; + + pdev = to_pci_dev(hcd->self.controller); + + /* Serial Bus Release Number is at PCI 0x60 offset */ + pci_read_config_byte(pdev, 0x60, &ehci->sbrn); + + /* port wake capability, reported by boot firmware */ + pci_read_config_word(pdev, 0x62, &port_wake); + hcd->can_wakeup = (port_wake & 1) != 0; + + /* help hc dma work well with cachelines */ + result = pci_set_mwi(pdev); + if (result) + ehci_dbg(ehci, "unable to enable MWI - not fatal.\n"); + } + + return ehci_run (hcd); +} + +/* always called by thread; normally rmmod */ + +static void ehci_pci_stop (struct usb_hcd *hcd) +{ + ehci_stop (hcd); +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_PM + +/* suspend/resume, section 4.3 */ + +/* These routines rely on the bus (pci, platform, etc) + * to handle powerdown and wakeup, and currently also on + * transceivers that don't need any software attention to set up + * the right sort of wakeup. + */ + +static int ehci_pci_suspend (struct usb_hcd *hcd, pm_message_t message) +{ + struct ehci_hcd *ehci = hcd_to_ehci (hcd); + + if (time_before (jiffies, ehci->next_statechange)) + msleep (100); + +#ifdef CONFIG_USB_SUSPEND + (void) usb_suspend_device (hcd->self.root_hub); +#else + usb_lock_device (hcd->self.root_hub); + (void) ehci_hub_suspend (hcd); + usb_unlock_device (hcd->self.root_hub); +#endif + + // save (PCI) FLADJ in case of Vaux power loss + // ... we'd only use it to handle clock skew + + return 0; +} + +static int ehci_pci_resume (struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci (hcd); + unsigned port; + struct usb_device *root = hcd->self.root_hub; + int retval = -EINVAL; + + // maybe restore (PCI) FLADJ + + if (time_before (jiffies, ehci->next_statechange)) + msleep (100); + + /* If any port is suspended (or owned by the companion), + * we know we can/must resume the HC (and mustn't reset it). + */ + for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) { + u32 status; + port--; + status = readl (&ehci->regs->port_status [port]); + if (!(status & PORT_POWER)) + continue; + if (status & (PORT_SUSPEND | PORT_OWNER)) { + down (&hcd->self.root_hub->serialize); + retval = ehci_hub_resume (hcd); + up (&hcd->self.root_hub->serialize); + break; + } + if (!root->children [port]) + continue; + dbg_port (ehci, __FUNCTION__, port + 1, status); + usb_set_device_state (root->children[port], + USB_STATE_NOTATTACHED); + } + + /* Else reset, to cope with power loss or flush-to-storage + * style "resume" having activated BIOS during reboot. + */ + if (port == 0) { + (void) ehci_halt (ehci); + (void) ehci_reset (ehci); + (void) ehci_pci_reset (hcd); + + /* emptying the schedule aborts any urbs */ + spin_lock_irq (&ehci->lock); + if (ehci->reclaim) + ehci->reclaim_ready = 1; + ehci_work (ehci, NULL); + spin_unlock_irq (&ehci->lock); + + /* restart; khubd will disconnect devices */ + retval = ehci_run (hcd); + + /* here we "know" root ports should always stay powered; + * but some controllers may lose all power. + */ + ehci_port_power (ehci, 1); + } + + return retval; +} +#endif + +static const struct hc_driver ehci_pci_hc_driver = { + .description = hcd_name, + .product_desc = "EHCI Host Controller", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + /* + * basic lifecycle operations + */ + .reset = ehci_pci_reset, + .start = ehci_pci_start, +#ifdef CONFIG_PM + .suspend = ehci_pci_suspend, + .resume = ehci_pci_resume, +#endif + .stop = ehci_pci_stop, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .hub_suspend = ehci_hub_suspend, + .hub_resume = ehci_hub_resume, +}; + +/*-------------------------------------------------------------------------*/ + +/* PCI driver selection metadata; PCI hotplugging uses this */ +static const struct pci_device_id pci_ids [] = { { + /* handle any USB 2.0 EHCI controller */ + PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0), + .driver_data = (unsigned long) &ehci_pci_hc_driver, + }, + { /* end: all zeroes */ } +}; +MODULE_DEVICE_TABLE (pci, pci_ids); + +/* pci driver glue; this is a "new style" PCI driver module */ +static struct pci_driver ehci_pci_driver = { + .name = (char *) hcd_name, + .id_table = pci_ids, + + .probe = usb_hcd_pci_probe, + .remove = usb_hcd_pci_remove, + +#ifdef CONFIG_PM + .suspend = usb_hcd_pci_suspend, + .resume = usb_hcd_pci_resume, +#endif +}; + +static int __init ehci_hcd_pci_init (void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_debug ("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n", + hcd_name, + sizeof (struct ehci_qh), sizeof (struct ehci_qtd), + sizeof (struct ehci_itd), sizeof (struct ehci_sitd)); + + return pci_register_driver (&ehci_pci_driver); +} +module_init (ehci_hcd_pci_init); + +static void __exit ehci_hcd_pci_cleanup (void) +{ + pci_unregister_driver (&ehci_pci_driver); +} +module_exit (ehci_hcd_pci_cleanup); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index f34a0516d35f..18e257c2bdb5 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -97,6 +97,7 @@ struct ehci_hcd { /* one per controller */ #else # define COUNT(x) do {} while (0) #endif + u8 sbrn; /* packed release number */ }; /* convert between an HCD pointer and the corresponding EHCI_HCD */