From: Borislav Petkov Date: Thu, 21 Oct 2010 16:52:53 +0000 (+0200) Subject: amd64_edac: Remove DRAM base/limit subfields caching X-Git-Tag: MMI-PSA29.97-13-9~20497^2~35 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=7f19bf755ced6fa16dbf118c0eff60586760496b;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git amd64_edac: Remove DRAM base/limit subfields caching Add a struct representing the DRAM base/limit range pairs and remove all cached subfields. Replace them with accessor functions, which actually saves us some space: text data bss dec hex filename 14712 1577 336 16625 40f1 drivers/edac/amd64_edac_mod.o.after 14831 1609 336 16776 4188 drivers/edac/amd64_edac_mod.o.before Also, it simplifies the code a lot allowing to merge the K8 and F10h routines. No functional change. Signed-off-by: Borislav Petkov --- diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index ae5adac3733f..683fd3c716a0 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -296,32 +296,13 @@ static u32 amd64_get_dct_mask(struct amd64_pvt *pvt, int dct, int csrow) return pvt->dcsm1[amd64_map_to_dcs_mask(pvt, csrow)]; } - /* - * In *base and *limit, pass back the full 40-bit base and limit physical - * addresses for the node given by node_id. This information is obtained from - * DRAM Base (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers. The - * base and limit addresses are of type SysAddr, as defined at the start of - * section 3.4.4 (p. 70). They are the lowest and highest physical addresses - * in the address range they represent. + * returns true if the SysAddr given by sys_addr matches the + * DRAM base/limit associated with node_id */ -static void amd64_get_base_and_limit(struct amd64_pvt *pvt, int node_id, - u64 *base, u64 *limit) +static bool amd64_base_limit_match(struct amd64_pvt *pvt, u64 sys_addr, int nid) { - *base = pvt->dram_base[node_id]; - *limit = pvt->dram_limit[node_id]; -} - -/* - * Return 1 if the SysAddr given by sys_addr matches the base/limit associated - * with node_id - */ -static int amd64_base_limit_match(struct amd64_pvt *pvt, - u64 sys_addr, int node_id) -{ - u64 base, limit, addr; - - amd64_get_base_and_limit(pvt, node_id, &base, &limit); + u64 addr; /* The K8 treats this as a 40-bit value. However, bits 63-40 will be * all ones if the most significant implemented address bit is 1. @@ -331,7 +312,8 @@ static int amd64_base_limit_match(struct amd64_pvt *pvt, */ addr = sys_addr & 0x000000ffffffffffull; - return (addr >= base) && (addr <= limit); + return ((addr >= get_dram_base(pvt, nid)) && + (addr <= get_dram_limit(pvt, nid))); } /* @@ -358,10 +340,10 @@ static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci, * registers. Therefore we arbitrarily choose to read it from the * register for node 0. */ - intlv_en = pvt->dram_IntlvEn[0]; + intlv_en = dram_intlv_en(pvt, 0); if (intlv_en == 0) { - for (node_id = 0; node_id < DRAM_REG_COUNT; node_id++) { + for (node_id = 0; node_id < DRAM_RANGES; node_id++) { if (amd64_base_limit_match(pvt, sys_addr, node_id)) goto found; } @@ -378,10 +360,10 @@ static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci, bits = (((u32) sys_addr) >> 12) & intlv_en; for (node_id = 0; ; ) { - if ((pvt->dram_IntlvSel[node_id] & intlv_en) == bits) + if ((dram_intlv_sel(pvt, node_id) & intlv_en) == bits) break; /* intlv_sel field matches */ - if (++node_id >= DRAM_REG_COUNT) + if (++node_id >= DRAM_RANGES) goto err_no_match; } @@ -476,19 +458,6 @@ static int input_addr_to_csrow(struct mem_ctl_info *mci, u64 input_addr) return -1; } -/* - * Return the base value defined by the DRAM Base register for the node - * represented by mci. This function returns the full 40-bit value despite the - * fact that the register only stores bits 39-24 of the value. See section - * 3.4.4.1 (BKDG #26094, K8, revA-E) - */ -static inline u64 get_dram_base(struct mem_ctl_info *mci) -{ - struct amd64_pvt *pvt = mci->pvt_info; - - return pvt->dram_base[pvt->mc_node_id]; -} - /* * Obtain info from the DRAM Hole Address Register (section 3.4.8, pub #26094) * for the node represented by mci. Info is passed back in *hole_base, @@ -598,10 +567,11 @@ EXPORT_SYMBOL_GPL(amd64_get_dram_hole_info); */ static u64 sys_addr_to_dram_addr(struct mem_ctl_info *mci, u64 sys_addr) { + struct amd64_pvt *pvt = mci->pvt_info; u64 dram_base, hole_base, hole_offset, hole_size, dram_addr; int ret = 0; - dram_base = get_dram_base(mci); + dram_base = get_dram_base(pvt, pvt->mc_node_id); ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset, &hole_size); @@ -665,7 +635,7 @@ static u64 dram_addr_to_input_addr(struct mem_ctl_info *mci, u64 dram_addr) * See the start of section 3.4.4 (p. 70, BKDG #26094, K8, revA-E) * concerning translating a DramAddr to an InputAddr. */ - intlv_shift = num_node_interleave_bits(pvt->dram_IntlvEn[0]); + intlv_shift = num_node_interleave_bits(dram_intlv_en(pvt, 0)); input_addr = ((dram_addr >> intlv_shift) & 0xffffff000ull) + (dram_addr & 0xfff); @@ -717,7 +687,7 @@ static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr) node_id = pvt->mc_node_id; BUG_ON((node_id < 0) || (node_id > 7)); - intlv_shift = num_node_interleave_bits(pvt->dram_IntlvEn[0]); + intlv_shift = num_node_interleave_bits(dram_intlv_en(pvt, 0)); if (intlv_shift == 0) { debugf1(" InputAddr 0x%lx translates to DramAddr of " @@ -729,7 +699,7 @@ static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr) bits = ((input_addr & 0xffffff000ull) << intlv_shift) + (input_addr & 0xfff); - intlv_sel = pvt->dram_IntlvSel[node_id] & ((1 << intlv_shift) - 1); + intlv_sel = dram_intlv_sel(pvt, node_id) & ((1 << intlv_shift) - 1); dram_addr = bits + (intlv_sel << 12); debugf1("InputAddr 0x%lx translates to DramAddr 0x%lx " @@ -746,7 +716,7 @@ static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr) static u64 dram_addr_to_sys_addr(struct mem_ctl_info *mci, u64 dram_addr) { struct amd64_pvt *pvt = mci->pvt_info; - u64 hole_base, hole_offset, hole_size, base, limit, sys_addr; + u64 hole_base, hole_offset, hole_size, base, sys_addr; int ret = 0; ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset, @@ -764,7 +734,7 @@ static u64 dram_addr_to_sys_addr(struct mem_ctl_info *mci, u64 dram_addr) } } - amd64_get_base_and_limit(pvt, pvt->mc_node_id, &base, &limit); + base = get_dram_base(pvt, pvt->mc_node_id); sys_addr = dram_addr + base; /* @@ -1090,33 +1060,21 @@ static u64 k8_get_error_address(struct mem_ctl_info *mci, (info->nbeal & ~0x03); } -/* - * Read the Base and Limit registers for K8 based Memory controllers; extract - * fields from the 'raw' reg into separate data fields - * - * Isolates: BASE, LIMIT, IntlvEn, IntlvSel, RW_EN - */ -static void k8_read_dram_base_limit(struct amd64_pvt *pvt, int dram) +static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range) { - u32 low; - u32 off = dram << 3; /* 8 bytes between DRAM entries */ + u32 off = range << 3; - amd64_read_pci_cfg(pvt->F1, K8_DRAM_BASE_LOW + off, &low); + amd64_read_pci_cfg(pvt->F1, DRAM_BASE_LO + off, &pvt->ranges[range].base.lo); + amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_LO + off, &pvt->ranges[range].lim.lo); - /* Extract parts into separate data entries */ - pvt->dram_base[dram] = ((u64) low & 0xFFFF0000) << 8; - pvt->dram_IntlvEn[dram] = (low >> 8) & 0x7; - pvt->dram_rw_en[dram] = (low & 0x3); + if (boot_cpu_data.x86 == 0xf) + return; - amd64_read_pci_cfg(pvt->F1, K8_DRAM_LIMIT_LOW + off, &low); + if (!dram_rw(pvt, range)) + return; - /* - * Extract parts into separate data entries. Limit is the HIGHEST memory - * location of the region, so lower 24 bits need to be all ones - */ - pvt->dram_limit[dram] = (((u64) low & 0xFFFF0000) << 8) | 0x00FFFFFF; - pvt->dram_IntlvSel[dram] = (low >> 8) & 0x7; - pvt->dram_DstNode[dram] = (low & 0x7); + amd64_read_pci_cfg(pvt->F1, DRAM_BASE_HI + off, &pvt->ranges[range].base.hi); + amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_HI + off, &pvt->ranges[range].lim.hi); } static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci, @@ -1271,53 +1229,6 @@ static u64 f10_get_error_address(struct mem_ctl_info *mci, (info->nbeal & ~0x01); } -/* - * Read the Base and Limit registers for F10 based Memory controllers. Extract - * fields from the 'raw' reg into separate data fields. - * - * Isolates: BASE, LIMIT, IntlvEn, IntlvSel, RW_EN. - */ -static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram) -{ - u32 high_offset, low_offset, high_base, low_base, high_limit, low_limit; - - low_offset = K8_DRAM_BASE_LOW + (dram << 3); - high_offset = F10_DRAM_BASE_HIGH + (dram << 3); - - /* read the 'raw' DRAM BASE Address register */ - amd64_read_pci_cfg(pvt->F1, low_offset, &low_base); - amd64_read_pci_cfg(pvt->F1, high_offset, &high_base); - - /* Extract parts into separate data entries */ - pvt->dram_rw_en[dram] = (low_base & 0x3); - - if (pvt->dram_rw_en[dram] == 0) - return; - - pvt->dram_IntlvEn[dram] = (low_base >> 8) & 0x7; - - pvt->dram_base[dram] = (((u64)high_base & 0x000000FF) << 40) | - (((u64)low_base & 0xFFFF0000) << 8); - - low_offset = K8_DRAM_LIMIT_LOW + (dram << 3); - high_offset = F10_DRAM_LIMIT_HIGH + (dram << 3); - - /* read the 'raw' LIMIT registers */ - amd64_read_pci_cfg(pvt->F1, low_offset, &low_limit); - amd64_read_pci_cfg(pvt->F1, high_offset, &high_limit); - - pvt->dram_DstNode[dram] = (low_limit & 0x7); - pvt->dram_IntlvSel[dram] = (low_limit >> 8) & 0x7; - - /* - * Extract address values and form a LIMIT address. Limit is the HIGHEST - * memory location of the region, so low 24 bits need to be all ones. - */ - pvt->dram_limit[dram] = (((u64)high_limit & 0x000000FF) << 40) | - (((u64) low_limit & 0xFFFF0000) << 8) | - 0x00FFFFFF; -} - static void f10_read_dram_ctl_register(struct amd64_pvt *pvt) { @@ -1520,22 +1431,21 @@ static int f10_lookup_addr_in_dct(u32 in_addr, u32 nid, u32 cs) } /* For a given @dram_range, check if @sys_addr falls within it. */ -static int f10_match_to_this_node(struct amd64_pvt *pvt, int dram_range, +static int f10_match_to_this_node(struct amd64_pvt *pvt, int range, u64 sys_addr, int *nid, int *chan_sel) { - int node_id, cs_found = -EINVAL, high_range = 0; - u32 intlv_en, intlv_sel, intlv_shift, hole_off; + int cs_found = -EINVAL, high_range = 0; + u32 intlv_shift, hole_off; u32 hole_valid, tmp, dct_sel_base, channel; - u64 dram_base, chan_addr, dct_sel_base_off; - - dram_base = pvt->dram_base[dram_range]; - intlv_en = pvt->dram_IntlvEn[dram_range]; + u64 chan_addr, dct_sel_base_off; - node_id = pvt->dram_DstNode[dram_range]; - intlv_sel = pvt->dram_IntlvSel[dram_range]; + u8 node_id = dram_dst_node(pvt, range); + u32 intlv_en = dram_intlv_en(pvt, range); + u32 intlv_sel = dram_intlv_sel(pvt, range); + u64 dram_base = get_dram_base(pvt, range); - debugf1("(dram=%d) Base=0x%llx SystemAddr= 0x%llx Limit=0x%llx\n", - dram_range, dram_base, sys_addr, pvt->dram_limit[dram_range]); + debugf1("(range %d) Base=0x%llx SystemAddr= 0x%llx Limit=0x%llx\n", + range, dram_base, sys_addr, get_dram_limit(pvt, range)); /* * This assumes that one node's DHAR is the same as all the other @@ -1604,20 +1514,17 @@ static int f10_match_to_this_node(struct amd64_pvt *pvt, int dram_range, static int f10_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr, int *node, int *chan_sel) { - int dram_range, cs_found = -EINVAL; - u64 dram_base, dram_limit; + int range, cs_found = -EINVAL; - for (dram_range = 0; dram_range < DRAM_REG_COUNT; dram_range++) { + for (range = 0; range < DRAM_RANGES; range++) { - if (!pvt->dram_rw_en[dram_range]) + if (!dram_rw(pvt, range)) continue; - dram_base = pvt->dram_base[dram_range]; - dram_limit = pvt->dram_limit[dram_range]; + if ((get_dram_base(pvt, range) <= sys_addr) && + (get_dram_limit(pvt, range) >= sys_addr)) { - if ((dram_base <= sys_addr) && (sys_addr <= dram_limit)) { - - cs_found = f10_match_to_this_node(pvt, dram_range, + cs_found = f10_match_to_this_node(pvt, range, sys_addr, node, chan_sel); if (cs_found >= 0) @@ -1727,7 +1634,6 @@ static struct amd64_family_type amd64_family_types[] = { .ops = { .early_channel_count = k8_early_channel_count, .get_error_address = k8_get_error_address, - .read_dram_base_limit = k8_read_dram_base_limit, .map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow, .dbam_to_cs = k8_dbam_to_chip_select, .read_dct_pci_cfg = k8_read_dct_pci_cfg, @@ -1740,7 +1646,6 @@ static struct amd64_family_type amd64_family_types[] = { .ops = { .early_channel_count = f10_early_channel_count, .get_error_address = f10_get_error_address, - .read_dram_base_limit = f10_read_dram_base_limit, .read_dram_ctl_register = f10_read_dram_ctl_register, .map_sysaddr_to_csrow = f10_map_sysaddr_to_csrow, .dbam_to_cs = f10_dbam_to_chip_select, @@ -2099,7 +2004,7 @@ static void read_mc_regs(struct amd64_pvt *pvt) { u64 msr_val; u32 tmp; - int dram; + int range; /* * Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since @@ -2121,34 +2026,27 @@ static void read_mc_regs(struct amd64_pvt *pvt) if (pvt->ops->read_dram_ctl_register) pvt->ops->read_dram_ctl_register(pvt); - for (dram = 0; dram < DRAM_REG_COUNT; dram++) { - /* - * Call CPU specific READ function to get the DRAM Base and - * Limit values from the DCT. - */ - pvt->ops->read_dram_base_limit(pvt, dram); + for (range = 0; range < DRAM_RANGES; range++) { + u8 rw; - /* - * Only print out debug info on rows with both R and W Enabled. - * Normal processing, compiler should optimize this whole 'if' - * debug output block away. - */ - if (pvt->dram_rw_en[dram] != 0) { - debugf1(" DRAM-BASE[%d]: 0x%016llx " - "DRAM-LIMIT: 0x%016llx\n", - dram, - pvt->dram_base[dram], - pvt->dram_limit[dram]); - - debugf1(" IntlvEn=%s %s %s " - "IntlvSel=%d DstNode=%d\n", - pvt->dram_IntlvEn[dram] ? - "Enabled" : "Disabled", - (pvt->dram_rw_en[dram] & 0x2) ? "W" : "!W", - (pvt->dram_rw_en[dram] & 0x1) ? "R" : "!R", - pvt->dram_IntlvSel[dram], - pvt->dram_DstNode[dram]); - } + /* read settings for this DRAM range */ + read_dram_base_limit_regs(pvt, range); + + rw = dram_rw(pvt, range); + if (!rw) + continue; + + debugf1(" DRAM range[%d], base: 0x%016llx; limit: 0x%016llx\n", + range, + get_dram_base(pvt, range), + get_dram_limit(pvt, range)); + + debugf1(" IntlvEn=%s; Range access: %s%s IntlvSel=%d DstNode=%d\n", + dram_intlv_en(pvt, range) ? "Enabled" : "Disabled", + (rw & 0x1) ? "R" : "-", + (rw & 0x2) ? "W" : "-", + dram_intlv_sel(pvt, range), + dram_dst_node(pvt, range)); } read_dct_base_mask(pvt); diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h index 91c266b9f6cf..93af3575e427 100644 --- a/drivers/edac/amd64_edac.h +++ b/drivers/edac/amd64_edac.h @@ -153,8 +153,8 @@ #define K8_REV_F 4 /* Hardware limit on ChipSelect rows per MC and processors per system */ -#define MAX_CS_COUNT 8 -#define DRAM_REG_COUNT 8 +#define NUM_CHIPSELECTS 8 +#define DRAM_RANGES 8 #define ON true #define OFF false @@ -167,8 +167,14 @@ /* * Function 1 - Address Map */ -#define K8_DRAM_BASE_LOW 0x40 -#define K8_DRAM_LIMIT_LOW 0x44 +#define DRAM_BASE_LO 0x40 +#define DRAM_LIMIT_LO 0x44 + +#define dram_intlv_en(pvt, i) ((pvt->ranges[i].base.lo >> 8) & 0x7) +#define dram_rw(pvt, i) (pvt->ranges[i].base.lo & 0x3) +#define dram_intlv_sel(pvt, i) ((pvt->ranges[i].lim.lo >> 8) & 0x7) +#define dram_dst_node(pvt, i) (pvt->ranges[i].lim.lo & 0x7) + #define K8_DHAR 0xf0 #define DHAR_VALID BIT(0) @@ -186,9 +192,8 @@ #define DCT_CFG_SEL 0x10C -/* F10 High BASE/LIMIT registers */ -#define F10_DRAM_BASE_HIGH 0x140 -#define F10_DRAM_LIMIT_HIGH 0x144 +#define DRAM_BASE_HI 0x140 +#define DRAM_LIMIT_HI 0x144 /* @@ -395,6 +400,19 @@ struct error_injection { u32 bit_map; }; +/* low and high part of PCI config space regs */ +struct reg_pair { + u32 lo, hi; +}; + +/* + * See F1x[1, 0][7C:40] DRAM Base/Limit Registers + */ +struct dram_range { + struct reg_pair base; + struct reg_pair lim; +}; + struct amd64_pvt { struct low_ops *ops; @@ -418,23 +436,15 @@ struct amd64_pvt { u32 dbam1; /* DRAM Base Address Mapping reg for DCT1 */ /* DRAM CS Base Address Registers F2x[1,0][5C:40] */ - u32 dcsb0[MAX_CS_COUNT]; - u32 dcsb1[MAX_CS_COUNT]; + u32 dcsb0[NUM_CHIPSELECTS]; + u32 dcsb1[NUM_CHIPSELECTS]; /* DRAM CS Mask Registers F2x[1,0][6C:60] */ - u32 dcsm0[MAX_CS_COUNT]; - u32 dcsm1[MAX_CS_COUNT]; + u32 dcsm0[NUM_CHIPSELECTS]; + u32 dcsm1[NUM_CHIPSELECTS]; - /* - * Decoded parts of DRAM BASE and LIMIT Registers - * F1x[78,70,68,60,58,50,48,40] - */ - u64 dram_base[DRAM_REG_COUNT]; - u64 dram_limit[DRAM_REG_COUNT]; - u8 dram_IntlvSel[DRAM_REG_COUNT]; - u8 dram_IntlvEn[DRAM_REG_COUNT]; - u8 dram_DstNode[DRAM_REG_COUNT]; - u8 dram_rw_en[DRAM_REG_COUNT]; + /* DRAM base and limit pairs F1x[78,70,68,60,58,50,48,40] */ + struct dram_range ranges[DRAM_RANGES]; /* * The following fields are set at (load) run time, after CPU revision @@ -472,6 +482,26 @@ struct amd64_pvt { }; +static inline u64 get_dram_base(struct amd64_pvt *pvt, unsigned i) +{ + u64 addr = ((u64)pvt->ranges[i].base.lo & 0xffff0000) << 8; + + if (boot_cpu_data.x86 == 0xf) + return addr; + + return (((u64)pvt->ranges[i].base.hi & 0x000000ff) << 40) | addr; +} + +static inline u64 get_dram_limit(struct amd64_pvt *pvt, unsigned i) +{ + u64 lim = (((u64)pvt->ranges[i].lim.lo & 0xffff0000) << 8) | 0x00ffffff; + + if (boot_cpu_data.x86 == 0xf) + return lim; + + return (((u64)pvt->ranges[i].lim.hi & 0x000000ff) << 40) | lim; +} + /* * per-node ECC settings descriptor */ @@ -517,7 +547,6 @@ struct low_ops { u64 (*get_error_address) (struct mem_ctl_info *mci, struct err_regs *info); - void (*read_dram_base_limit) (struct amd64_pvt *pvt, int dram); void (*read_dram_ctl_register) (struct amd64_pvt *pvt); void (*map_sysaddr_to_csrow) (struct mem_ctl_info *mci, struct err_regs *info, u64 SystemAddr);