From: Corentin Chary Date: Thu, 15 Dec 2011 07:27:37 +0000 (+0100) Subject: platform/x86: drop deprecated asus_acpi driver X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=7ec48ceda25c6c16ab3f69b6c318d3d196f7abd0;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git platform/x86: drop deprecated asus_acpi driver asus_acpi only support old models, it has been deprecated since 2009 in favor of asus-laptop, it's not built by any (sane) distro, so it is time to say good bye. Thanks to Julien Lerouge and Karol Kozimor for the work they have done on it, I would never have wrote asus-laptop and other asus related drivers without asus_acpi. Signed-off-by: Corentin Chary Signed-off-by: Matthew Garrett --- diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt index 803e51f6768b..a1e04d679289 100644 --- a/Documentation/laptops/asus-laptop.txt +++ b/Documentation/laptops/asus-laptop.txt @@ -45,7 +45,7 @@ Status Usage ----- - Try "modprobe asus_acpi". Check your dmesg (simply type dmesg). You should + Try "modprobe asus-laptop". Check your dmesg (simply type dmesg). You should see some lines like this : Asus Laptop Extras version 0.42 diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index f3f0fe7e255a..45d8097ef4cf 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -23,7 +23,7 @@ * Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B) * are available, video.ko should be used to handle the device. * - * Otherwise vendor specific drivers like thinkpad_acpi, asus_acpi, + * Otherwise vendor specific drivers like thinkpad_acpi, asus-laptop, * sony_acpi,... can take care about backlight brightness. * * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 912ffef0f148..0b5519cda194 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -54,7 +54,6 @@ config ACERHDF config ASUS_LAPTOP tristate "Asus Laptop Extras" depends on ACPI - depends on !ACPI_ASUS select LEDS_CLASS select NEW_LEDS select BACKLIGHT_CLASS_DEVICE @@ -460,10 +459,9 @@ config INTEL_MENLOW If unsure, say N. config EEEPC_LAPTOP - tristate "Eee PC Hotkey Driver (EXPERIMENTAL)" + tristate "Eee PC Hotkey Driver" depends on ACPI depends on INPUT - depends on EXPERIMENTAL depends on RFKILL || RFKILL = n depends on HOTPLUG_PCI select BACKLIGHT_CLASS_DEVICE @@ -482,11 +480,10 @@ config EEEPC_LAPTOP doesn't work on your Eee PC, try eeepc-wmi instead. config ASUS_WMI - tristate "ASUS WMI Driver (EXPERIMENTAL)" + tristate "ASUS WMI Driver" depends on ACPI_WMI depends on INPUT depends on HWMON - depends on EXPERIMENTAL depends on BACKLIGHT_CLASS_DEVICE depends on RFKILL || RFKILL = n depends on HOTPLUG_PCI @@ -501,7 +498,7 @@ config ASUS_WMI be called asus-wmi. config ASUS_NB_WMI - tristate "Asus Notebook WMI Driver (EXPERIMENTAL)" + tristate "Asus Notebook WMI Driver" depends on ASUS_WMI ---help--- This is a driver for newer Asus notebooks. It adds extra features @@ -514,7 +511,7 @@ config ASUS_NB_WMI here. config EEEPC_WMI - tristate "Eee PC WMI Driver (EXPERIMENTAL)" + tristate "Eee PC WMI Driver" depends on ASUS_WMI ---help--- This is a driver for newer Eee PC laptops. It adds extra features @@ -559,38 +556,6 @@ config MSI_WMI To compile this driver as a module, choose M here: the module will be called msi-wmi. -config ACPI_ASUS - tristate "ASUS/Medion Laptop Extras (DEPRECATED)" - depends on ACPI - select BACKLIGHT_CLASS_DEVICE - ---help--- - This driver provides support for extra features of ACPI-compatible - ASUS laptops. As some of Medion laptops are made by ASUS, it may also - support some Medion laptops (such as 9675 for example). It makes all - the extra buttons generate standard ACPI events that go through - /proc/acpi/events, and (on some models) adds support for changing the - display brightness and output, switching the LCD backlight on and off, - and most importantly, allows you to blink those fancy LEDs intended - for reporting mail and wireless status. - - Note: display switching code is currently considered EXPERIMENTAL, - toying with these values may even lock your machine. - - All settings are changed via /proc/acpi/asus directory entries. Owner - and group for these entries can be set with asus_uid and asus_gid - parameters. - - More information and a userspace daemon for handling the extra buttons - at . - - If you have an ACPI-compatible ASUS laptop, say Y or M here. This - driver is still under development, so if your laptop is unsupported or - something works not quite as expected, please use the mailing list - available on the above page (acpi4asus-user@lists.sourceforge.net). - - NOTE: This driver is deprecated and will probably be removed soon, - use asus-laptop instead. - config TOPSTAR_LAPTOP tristate "Topstar Laptop Extras" depends on ACPI diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index d328f21e9fdd..3c07f8bfd42c 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -29,7 +29,6 @@ obj-$(CONFIG_PANASONIC_LAPTOP) += panasonic-laptop.o obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o obj-$(CONFIG_ACPI_WMI) += wmi.o obj-$(CONFIG_MSI_WMI) += msi-wmi.o -obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o obj-$(CONFIG_TOPSTAR_LAPTOP) += topstar-laptop.o obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o obj-$(CONFIG_TOSHIBA_BT_RFKILL) += toshiba_bluetooth.o diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c deleted file mode 100644 index 6f966d6c062b..000000000000 --- a/drivers/platform/x86/asus_acpi.c +++ /dev/null @@ -1,1513 +0,0 @@ -/* - * asus_acpi.c - Asus Laptop ACPI Extras - * - * - * Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * The development page for this driver is located at - * http://sourceforge.net/projects/acpi4asus/ - * - * Credits: - * Pontus Fuchs - Helper functions, cleanup - * Johann Wiesner - Small compile fixes - * John Belmonte - ACPI code for Toshiba laptop was a good starting point. - * �ic Burghard - LED display support for W1N - * - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define ASUS_ACPI_VERSION "0.30" - -#define PROC_ASUS "asus" /* The directory */ -#define PROC_MLED "mled" -#define PROC_WLED "wled" -#define PROC_TLED "tled" -#define PROC_BT "bluetooth" -#define PROC_LEDD "ledd" -#define PROC_INFO "info" -#define PROC_LCD "lcd" -#define PROC_BRN "brn" -#define PROC_DISP "disp" - -#define ACPI_HOTK_NAME "Asus Laptop ACPI Extras Driver" -#define ACPI_HOTK_CLASS "hotkey" -#define ACPI_HOTK_DEVICE_NAME "Hotkey" - -/* - * Some events we use, same for all Asus - */ -#define BR_UP 0x10 -#define BR_DOWN 0x20 - -/* - * Flags for hotk status - */ -#define MLED_ON 0x01 /* Mail LED */ -#define WLED_ON 0x02 /* Wireless LED */ -#define TLED_ON 0x04 /* Touchpad LED */ -#define BT_ON 0x08 /* Internal Bluetooth */ - -MODULE_AUTHOR("Julien Lerouge, Karol Kozimor"); -MODULE_DESCRIPTION(ACPI_HOTK_NAME); -MODULE_LICENSE("GPL"); - -static uid_t asus_uid; -static gid_t asus_gid; -module_param(asus_uid, uint, 0); -MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus"); -module_param(asus_gid, uint, 0); -MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus"); - -/* For each model, all features implemented, - * those marked with R are relative to HOTK, A for absolute */ -struct model_data { - char *name; /* name of the laptop________________A */ - char *mt_mled; /* method to handle mled_____________R */ - char *mled_status; /* node to handle mled reading_______A */ - char *mt_wled; /* method to handle wled_____________R */ - char *wled_status; /* node to handle wled reading_______A */ - char *mt_tled; /* method to handle tled_____________R */ - char *tled_status; /* node to handle tled reading_______A */ - char *mt_ledd; /* method to handle LED display______R */ - char *mt_bt_switch; /* method to switch Bluetooth on/off_R */ - char *bt_status; /* no model currently supports this__? */ - char *mt_lcd_switch; /* method to turn LCD on/off_________A */ - char *lcd_status; /* node to read LCD panel state______A */ - char *brightness_up; /* method to set brightness up_______A */ - char *brightness_down; /* method to set brightness down ____A */ - char *brightness_set; /* method to set absolute brightness_R */ - char *brightness_get; /* method to get absolute brightness_R */ - char *brightness_status;/* node to get brightness____________A */ - char *display_set; /* method to set video output________R */ - char *display_get; /* method to get video output________R */ -}; - -/* - * This is the main structure, we can use it to store anything interesting - * about the hotk device - */ -struct asus_hotk { - struct acpi_device *device; /* the device we are in */ - acpi_handle handle; /* the handle of the hotk device */ - char status; /* status of the hotk, for LEDs */ - u32 ledd_status; /* status of the LED display */ - struct model_data *methods; /* methods available on the laptop */ - u8 brightness; /* brightness level */ - enum { - A1x = 0, /* A1340D, A1300F */ - A2x, /* A2500H */ - A4G, /* A4700G */ - D1x, /* D1 */ - L2D, /* L2000D */ - L3C, /* L3800C */ - L3D, /* L3400D */ - L3H, /* L3H, L2000E, L5D */ - L4R, /* L4500R */ - L5x, /* L5800C */ - L8L, /* L8400L */ - M1A, /* M1300A */ - M2E, /* M2400E, L4400L */ - M6N, /* M6800N, W3400N */ - M6R, /* M6700R, A3000G */ - P30, /* Samsung P30 */ - S1x, /* S1300A, but also L1400B and M2400A (L84F) */ - S2x, /* S200 (J1 reported), Victor MP-XP7210 */ - W1N, /* W1000N */ - W5A, /* W5A */ - W3V, /* W3030V */ - xxN, /* M2400N, M3700N, M5200N, M6800N, - S1300N, S5200N*/ - A4S, /* Z81sp */ - F3Sa, /* (Centrino) */ - R1F, - END_MODEL - } model; /* Models currently supported */ - u16 event_count[128]; /* Count for each event TODO make this better */ -}; - -/* Here we go */ -#define A1x_PREFIX "\\_SB.PCI0.ISA.EC0." -#define L3C_PREFIX "\\_SB.PCI0.PX40.ECD0." -#define M1A_PREFIX "\\_SB.PCI0.PX40.EC0." -#define P30_PREFIX "\\_SB.PCI0.LPCB.EC0." -#define S1x_PREFIX "\\_SB.PCI0.PX40." -#define S2x_PREFIX A1x_PREFIX -#define xxN_PREFIX "\\_SB.PCI0.SBRG.EC0." - -static struct model_data model_conf[END_MODEL] = { - /* - * TODO I have seen a SWBX and AIBX method on some models, like L1400B, - * it seems to be a kind of switch, but what for ? - */ - - { - .name = "A1x", - .mt_mled = "MLED", - .mled_status = "\\MAIL", - .mt_lcd_switch = A1x_PREFIX "_Q10", - .lcd_status = "\\BKLI", - .brightness_up = A1x_PREFIX "_Q0E", - .brightness_down = A1x_PREFIX "_Q0F"}, - - { - .name = "A2x", - .mt_mled = "MLED", - .mt_wled = "WLED", - .wled_status = "\\SG66", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\BAOF", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "A4G", - .mt_mled = "MLED", -/* WLED present, but not controlled by ACPI */ - .mt_lcd_switch = xxN_PREFIX "_Q10", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\ADVG"}, - - { - .name = "D1x", - .mt_mled = "MLED", - .mt_lcd_switch = "\\Q0D", - .lcd_status = "\\GP11", - .brightness_up = "\\Q0C", - .brightness_down = "\\Q0B", - .brightness_status = "\\BLVL", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L2D", - .mt_mled = "MLED", - .mled_status = "\\SGP6", - .mt_wled = "WLED", - .wled_status = "\\RCP3", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\SGP0", - .brightness_up = "\\Q0E", - .brightness_down = "\\Q0F", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L3C", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = L3C_PREFIX "_Q10", - .lcd_status = "\\GL32", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\_SB.PCI0.PCI1.VGAC.NMAP"}, - - { - .name = "L3D", - .mt_mled = "MLED", - .mled_status = "\\MALD", - .mt_wled = "WLED", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\BKLG", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L3H", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = "EHK", - .lcd_status = "\\_SB.PCI0.PM.PBC", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L4R", - .mt_mled = "MLED", - .mt_wled = "WLED", - .wled_status = "\\_SB.PCI0.SBRG.SG13", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\_SB.PCI0.SBSM.SEO4", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"}, - - { - .name = "L5x", - .mt_mled = "MLED", -/* WLED present, but not controlled by ACPI */ - .mt_tled = "TLED", - .mt_lcd_switch = "\\Q0D", - .lcd_status = "\\BAOF", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L8L" -/* No features, but at least support the hotkeys */ - }, - - { - .name = "M1A", - .mt_mled = "MLED", - .mt_lcd_switch = M1A_PREFIX "Q10", - .lcd_status = "\\PNOF", - .brightness_up = M1A_PREFIX "Q0E", - .brightness_down = M1A_PREFIX "Q0F", - .brightness_status = "\\BRIT", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "M2E", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\GP06", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "M6N", - .mt_mled = "MLED", - .mt_wled = "WLED", - .wled_status = "\\_SB.PCI0.SBRG.SG13", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\_SB.BKLT", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\SSTE"}, - - { - .name = "M6R", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\_SB.PCI0.SBSM.SEO4", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"}, - - { - .name = "P30", - .mt_wled = "WLED", - .mt_lcd_switch = P30_PREFIX "_Q0E", - .lcd_status = "\\BKLT", - .brightness_up = P30_PREFIX "_Q68", - .brightness_down = P30_PREFIX "_Q69", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\DNXT"}, - - { - .name = "S1x", - .mt_mled = "MLED", - .mled_status = "\\EMLE", - .mt_wled = "WLED", - .mt_lcd_switch = S1x_PREFIX "Q10", - .lcd_status = "\\PNOF", - .brightness_set = "SPLV", - .brightness_get = "GPLV"}, - - { - .name = "S2x", - .mt_mled = "MLED", - .mled_status = "\\MAIL", - .mt_lcd_switch = S2x_PREFIX "_Q10", - .lcd_status = "\\BKLI", - .brightness_up = S2x_PREFIX "_Q0B", - .brightness_down = S2x_PREFIX "_Q0A"}, - - { - .name = "W1N", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_ledd = "SLCM", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\BKLT", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\ADVG"}, - - { - .name = "W5A", - .mt_bt_switch = "BLED", - .mt_wled = "WLED", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\ADVG"}, - - { - .name = "W3V", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\BKLT", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "xxN", - .mt_mled = "MLED", -/* WLED present, but not controlled by ACPI */ - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\BKLT", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\ADVG"}, - - { - .name = "A4S", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .mt_bt_switch = "BLED", - .mt_wled = "WLED" - }, - - { - .name = "F3Sa", - .mt_bt_switch = "BLED", - .mt_wled = "WLED", - .mt_mled = "MLED", - .brightness_get = "GPLV", - .brightness_set = "SPLV", - .mt_lcd_switch = "\\_SB.PCI0.SBRG.EC0._Q10", - .lcd_status = "\\_SB.PCI0.SBRG.EC0.RPIN", - .display_get = "\\ADVG", - .display_set = "SDSP", - }, - { - .name = "R1F", - .mt_bt_switch = "BLED", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\GP06", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB" - } -}; - -/* procdir we use */ -static struct proc_dir_entry *asus_proc_dir; - -static struct backlight_device *asus_backlight_device; - -/* - * This header is made available to allow proper configuration given model, - * revision number , ... this info cannot go in struct asus_hotk because it is - * available before the hotk - */ -static struct acpi_table_header *asus_info; - -/* The actual device the driver binds to */ -static struct asus_hotk *hotk; - -/* - * The hotkey driver and autoloading declaration - */ -static int asus_hotk_add(struct acpi_device *device); -static int asus_hotk_remove(struct acpi_device *device, int type); -static void asus_hotk_notify(struct acpi_device *device, u32 event); - -static const struct acpi_device_id asus_device_ids[] = { - {"ATK0100", 0}, - {"", 0}, -}; -MODULE_DEVICE_TABLE(acpi, asus_device_ids); - -static struct acpi_driver asus_hotk_driver = { - .name = "asus_acpi", - .class = ACPI_HOTK_CLASS, - .owner = THIS_MODULE, - .ids = asus_device_ids, - .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS, - .ops = { - .add = asus_hotk_add, - .remove = asus_hotk_remove, - .notify = asus_hotk_notify, - }, -}; - -/* - * This function evaluates an ACPI method, given an int as parameter, the - * method is searched within the scope of the handle, can be NULL. The output - * of the method is written is output, which can also be NULL - * - * returns 1 if write is successful, 0 else. - */ -static int write_acpi_int(acpi_handle handle, const char *method, int val, - struct acpi_buffer *output) -{ - struct acpi_object_list params; /* list of input parameters (int) */ - union acpi_object in_obj; /* the only param we use */ - acpi_status status; - - params.count = 1; - params.pointer = &in_obj; - in_obj.type = ACPI_TYPE_INTEGER; - in_obj.integer.value = val; - - status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); - return (status == AE_OK); -} - -static int read_acpi_int(acpi_handle handle, const char *method, int *val) -{ - struct acpi_buffer output; - union acpi_object out_obj; - acpi_status status; - - output.length = sizeof(out_obj); - output.pointer = &out_obj; - - status = acpi_evaluate_object(handle, (char *)method, NULL, &output); - *val = out_obj.integer.value; - return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER); -} - -static int asus_info_proc_show(struct seq_file *m, void *v) -{ - int temp; - - seq_printf(m, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n"); - seq_printf(m, "Model reference : %s\n", hotk->methods->name); - /* - * The SFUN method probably allows the original driver to get the list - * of features supported by a given model. For now, 0x0100 or 0x0800 - * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card. - * The significance of others is yet to be found. - */ - if (read_acpi_int(hotk->handle, "SFUN", &temp)) - seq_printf(m, "SFUN value : 0x%04x\n", temp); - /* - * Another value for userspace: the ASYM method returns 0x02 for - * battery low and 0x04 for battery critical, its readings tend to be - * more accurate than those provided by _BST. - * Note: since not all the laptops provide this method, errors are - * silently ignored. - */ - if (read_acpi_int(hotk->handle, "ASYM", &temp)) - seq_printf(m, "ASYM value : 0x%04x\n", temp); - if (asus_info) { - seq_printf(m, "DSDT length : %d\n", asus_info->length); - seq_printf(m, "DSDT checksum : %d\n", asus_info->checksum); - seq_printf(m, "DSDT revision : %d\n", asus_info->revision); - seq_printf(m, "OEM id : %.*s\n", ACPI_OEM_ID_SIZE, asus_info->oem_id); - seq_printf(m, "OEM table id : %.*s\n", ACPI_OEM_TABLE_ID_SIZE, asus_info->oem_table_id); - seq_printf(m, "OEM revision : 0x%x\n", asus_info->oem_revision); - seq_printf(m, "ASL comp vendor id : %.*s\n", ACPI_NAME_SIZE, asus_info->asl_compiler_id); - seq_printf(m, "ASL comp revision : 0x%x\n", asus_info->asl_compiler_revision); - } - - return 0; -} - -static int asus_info_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, asus_info_proc_show, NULL); -} - -static const struct file_operations asus_info_proc_fops = { - .owner = THIS_MODULE, - .open = asus_info_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/* - * /proc handlers - * We write our info in page, we begin at offset off and cannot write more - * than count bytes. We set eof to 1 if we handle those 2 values. We return the - * number of bytes written in page - */ - -/* Generic LED functions */ -static int read_led(const char *ledname, int ledmask) -{ - if (ledname) { - int led_status; - - if (read_acpi_int(NULL, ledname, &led_status)) - return led_status; - else - pr_warn("Error reading LED status\n"); - } - return (hotk->status & ledmask) ? 1 : 0; -} - -static int parse_arg(const char __user *buf, unsigned long count, int *val) -{ - char s[32]; - if (!count) - return 0; - if (count > 31) - return -EINVAL; - if (copy_from_user(s, buf, count)) - return -EFAULT; - s[count] = 0; - if (sscanf(s, "%i", val) != 1) - return -EINVAL; - return count; -} - -/* FIXME: kill extraneous args so it can be called independently */ -static int -write_led(const char __user *buffer, unsigned long count, - char *ledname, int ledmask, int invert) -{ - int rv, value; - int led_out = 0; - - rv = parse_arg(buffer, count, &value); - if (rv > 0) - led_out = value ? 1 : 0; - - hotk->status = - (led_out) ? (hotk->status | ledmask) : (hotk->status & ~ledmask); - - if (invert) /* invert target value */ - led_out = !led_out; - - if (!write_acpi_int(hotk->handle, ledname, led_out, NULL)) - pr_warn("LED (%s) write failed\n", ledname); - - return rv; -} - -/* - * Proc handlers for MLED - */ -static int mled_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "%d\n", read_led(hotk->methods->mled_status, MLED_ON)); - return 0; -} - -static int mled_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, mled_proc_show, NULL); -} - -static ssize_t mled_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *pos) -{ - return write_led(buffer, count, hotk->methods->mt_mled, MLED_ON, 1); -} - -static const struct file_operations mled_proc_fops = { - .owner = THIS_MODULE, - .open = mled_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = mled_proc_write, -}; - -/* - * Proc handlers for LED display - */ -static int ledd_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "0x%08x\n", hotk->ledd_status); - return 0; -} - -static int ledd_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, ledd_proc_show, NULL); -} - -static ssize_t ledd_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *pos) -{ - int rv, value; - - rv = parse_arg(buffer, count, &value); - if (rv > 0) { - if (!write_acpi_int - (hotk->handle, hotk->methods->mt_ledd, value, NULL)) - pr_warn("LED display write failed\n"); - else - hotk->ledd_status = (u32) value; - } - return rv; -} - -static const struct file_operations ledd_proc_fops = { - .owner = THIS_MODULE, - .open = ledd_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = ledd_proc_write, -}; - -/* - * Proc handlers for WLED - */ -static int wled_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "%d\n", read_led(hotk->methods->wled_status, WLED_ON)); - return 0; -} - -static int wled_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, wled_proc_show, NULL); -} - -static ssize_t wled_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *pos) -{ - return write_led(buffer, count, hotk->methods->mt_wled, WLED_ON, 0); -} - -static const struct file_operations wled_proc_fops = { - .owner = THIS_MODULE, - .open = wled_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = wled_proc_write, -}; - -/* - * Proc handlers for Bluetooth - */ -static int bluetooth_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "%d\n", read_led(hotk->methods->bt_status, BT_ON)); - return 0; -} - -static int bluetooth_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, bluetooth_proc_show, NULL); -} - -static ssize_t bluetooth_proc_write(struct file *file, - const char __user *buffer, size_t count, loff_t *pos) -{ - /* Note: mt_bt_switch controls both internal Bluetooth adapter's - presence and its LED */ - return write_led(buffer, count, hotk->methods->mt_bt_switch, BT_ON, 0); -} - -static const struct file_operations bluetooth_proc_fops = { - .owner = THIS_MODULE, - .open = bluetooth_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = bluetooth_proc_write, -}; - -/* - * Proc handlers for TLED - */ -static int tled_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "%d\n", read_led(hotk->methods->tled_status, TLED_ON)); - return 0; -} - -static int tled_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, tled_proc_show, NULL); -} - -static ssize_t tled_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *pos) -{ - return write_led(buffer, count, hotk->methods->mt_tled, TLED_ON, 0); -} - -static const struct file_operations tled_proc_fops = { - .owner = THIS_MODULE, - .open = tled_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = tled_proc_write, -}; - -static int get_lcd_state(void) -{ - int lcd = 0; - - if (hotk->model == L3H) { - /* L3H and the like have to be handled differently */ - acpi_status status = 0; - struct acpi_object_list input; - union acpi_object mt_params[2]; - struct acpi_buffer output; - union acpi_object out_obj; - - input.count = 2; - input.pointer = mt_params; - /* Note: the following values are partly guessed up, but - otherwise they seem to work */ - mt_params[0].type = ACPI_TYPE_INTEGER; - mt_params[0].integer.value = 0x02; - mt_params[1].type = ACPI_TYPE_INTEGER; - mt_params[1].integer.value = 0x02; - - output.length = sizeof(out_obj); - output.pointer = &out_obj; - - status = - acpi_evaluate_object(NULL, hotk->methods->lcd_status, - &input, &output); - if (status != AE_OK) - return -1; - if (out_obj.type == ACPI_TYPE_INTEGER) - /* That's what the AML code does */ - lcd = out_obj.integer.value >> 8; - } else if (hotk->model == F3Sa) { - unsigned long long tmp; - union acpi_object param; - struct acpi_object_list input; - acpi_status status; - - /* Read pin 11 */ - param.type = ACPI_TYPE_INTEGER; - param.integer.value = 0x11; - input.count = 1; - input.pointer = ¶m; - - status = acpi_evaluate_integer(NULL, hotk->methods->lcd_status, - &input, &tmp); - if (status != AE_OK) - return -1; - - lcd = tmp; - } else { - /* We don't have to check anything if we are here */ - if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd)) - pr_warn("Error reading LCD status\n"); - - if (hotk->model == L2D) - lcd = ~lcd; - } - - return (lcd & 1); -} - -static int set_lcd_state(int value) -{ - int lcd = 0; - acpi_status status = 0; - - lcd = value ? 1 : 0; - if (lcd != get_lcd_state()) { - /* switch */ - if (hotk->model != L3H) { - status = - acpi_evaluate_object(NULL, - hotk->methods->mt_lcd_switch, - NULL, NULL); - } else { - /* L3H and the like must be handled differently */ - if (!write_acpi_int - (hotk->handle, hotk->methods->mt_lcd_switch, 0x07, - NULL)) - status = AE_ERROR; - /* L3H's AML executes EHK (0x07) upon Fn+F7 keypress, - the exact behaviour is simulated here */ - } - if (ACPI_FAILURE(status)) - pr_warn("Error switching LCD\n"); - } - return 0; - -} - -static int lcd_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "%d\n", get_lcd_state()); - return 0; -} - -static int lcd_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, lcd_proc_show, NULL); -} - -static ssize_t lcd_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *pos) -{ - int rv, value; - - rv = parse_arg(buffer, count, &value); - if (rv > 0) - set_lcd_state(value); - return rv; -} - -static const struct file_operations lcd_proc_fops = { - .owner = THIS_MODULE, - .open = lcd_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = lcd_proc_write, -}; - -static int read_brightness(struct backlight_device *bd) -{ - int value; - - if (hotk->methods->brightness_get) { /* SPLV/GPLV laptop */ - if (!read_acpi_int(hotk->handle, hotk->methods->brightness_get, - &value)) - pr_warn("Error reading brightness\n"); - } else if (hotk->methods->brightness_status) { /* For D1 for example */ - if (!read_acpi_int(NULL, hotk->methods->brightness_status, - &value)) - pr_warn("Error reading brightness\n"); - } else /* No GPLV method */ - value = hotk->brightness; - return value; -} - -/* - * Change the brightness level - */ -static int set_brightness(int value) -{ - acpi_status status = 0; - int ret = 0; - - /* SPLV laptop */ - if (hotk->methods->brightness_set) { - if (!write_acpi_int(hotk->handle, hotk->methods->brightness_set, - value, NULL)) { - pr_warn("Error changing brightness\n"); - ret = -EIO; - } - goto out; - } - - /* No SPLV method if we are here, act as appropriate */ - value -= read_brightness(NULL); - while (value != 0) { - status = acpi_evaluate_object(NULL, (value > 0) ? - hotk->methods->brightness_up : - hotk->methods->brightness_down, - NULL, NULL); - (value > 0) ? value-- : value++; - if (ACPI_FAILURE(status)) { - pr_warn("Error changing brightness\n"); - ret = -EIO; - } - } -out: - return ret; -} - -static int set_brightness_status(struct backlight_device *bd) -{ - return set_brightness(bd->props.brightness); -} - -static int brn_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "%d\n", read_brightness(NULL)); - return 0; -} - -static int brn_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, brn_proc_show, NULL); -} - -static ssize_t brn_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *pos) -{ - int rv, value; - - rv = parse_arg(buffer, count, &value); - if (rv > 0) { - value = (0 < value) ? ((15 < value) ? 15 : value) : 0; - /* 0 <= value <= 15 */ - set_brightness(value); - } - return rv; -} - -static const struct file_operations brn_proc_fops = { - .owner = THIS_MODULE, - .open = brn_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = brn_proc_write, -}; - -static void set_display(int value) -{ - /* no sanity check needed for now */ - if (!write_acpi_int(hotk->handle, hotk->methods->display_set, - value, NULL)) - pr_warn("Error setting display\n"); - return; -} - -/* - * Now, *this* one could be more user-friendly, but so far, no-one has - * complained. The significance of bits is the same as in proc_write_disp() - */ -static int disp_proc_show(struct seq_file *m, void *v) -{ - int value = 0; - - if (!read_acpi_int(hotk->handle, hotk->methods->display_get, &value)) - pr_warn("Error reading display status\n"); - value &= 0x07; /* needed for some models, shouldn't hurt others */ - seq_printf(m, "%d\n", value); - return 0; -} - -static int disp_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, disp_proc_show, NULL); -} - -/* - * Experimental support for display switching. As of now: 1 should activate - * the LCD output, 2 should do for CRT, and 4 for TV-Out. Any combination - * (bitwise) of these will suffice. I never actually tested 3 displays hooked - * up simultaneously, so be warned. See the acpi4asus README for more info. - */ -static ssize_t disp_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *pos) -{ - int rv, value; - - rv = parse_arg(buffer, count, &value); - if (rv > 0) - set_display(value); - return rv; -} - -static const struct file_operations disp_proc_fops = { - .owner = THIS_MODULE, - .open = disp_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = disp_proc_write, -}; - -static int -asus_proc_add(char *name, const struct file_operations *proc_fops, umode_t mode, - struct acpi_device *device) -{ - struct proc_dir_entry *proc; - - proc = proc_create_data(name, mode, acpi_device_dir(device), - proc_fops, acpi_driver_data(device)); - if (!proc) { - pr_warn(" Unable to create %s fs entry\n", name); - return -1; - } - proc->uid = asus_uid; - proc->gid = asus_gid; - return 0; -} - -static int asus_hotk_add_fs(struct acpi_device *device) -{ - struct proc_dir_entry *proc; - umode_t mode; - - if ((asus_uid == 0) && (asus_gid == 0)) { - mode = S_IFREG | S_IRUGO | S_IWUSR | S_IWGRP; - } else { - mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP; - pr_warn(" asus_uid and asus_gid parameters are " - "deprecated, use chown and chmod instead!\n"); - } - - acpi_device_dir(device) = asus_proc_dir; - if (!acpi_device_dir(device)) - return -ENODEV; - - proc = proc_create(PROC_INFO, mode, acpi_device_dir(device), - &asus_info_proc_fops); - if (proc) { - proc->uid = asus_uid; - proc->gid = asus_gid; - } else { - pr_warn(" Unable to create " PROC_INFO " fs entry\n"); - } - - if (hotk->methods->mt_wled) { - asus_proc_add(PROC_WLED, &wled_proc_fops, mode, device); - } - - if (hotk->methods->mt_ledd) { - asus_proc_add(PROC_LEDD, &ledd_proc_fops, mode, device); - } - - if (hotk->methods->mt_mled) { - asus_proc_add(PROC_MLED, &mled_proc_fops, mode, device); - } - - if (hotk->methods->mt_tled) { - asus_proc_add(PROC_TLED, &tled_proc_fops, mode, device); - } - - if (hotk->methods->mt_bt_switch) { - asus_proc_add(PROC_BT, &bluetooth_proc_fops, mode, device); - } - - /* - * We need both read node and write method as LCD switch is also - * accessible from the keyboard - */ - if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) { - asus_proc_add(PROC_LCD, &lcd_proc_fops, mode, device); - } - - if ((hotk->methods->brightness_up && hotk->methods->brightness_down) || - (hotk->methods->brightness_get && hotk->methods->brightness_set)) { - asus_proc_add(PROC_BRN, &brn_proc_fops, mode, device); - } - - if (hotk->methods->display_set) { - asus_proc_add(PROC_DISP, &disp_proc_fops, mode, device); - } - - return 0; -} - -static int asus_hotk_remove_fs(struct acpi_device *device) -{ - if (acpi_device_dir(device)) { - remove_proc_entry(PROC_INFO, acpi_device_dir(device)); - if (hotk->methods->mt_wled) - remove_proc_entry(PROC_WLED, acpi_device_dir(device)); - if (hotk->methods->mt_mled) - remove_proc_entry(PROC_MLED, acpi_device_dir(device)); - if (hotk->methods->mt_tled) - remove_proc_entry(PROC_TLED, acpi_device_dir(device)); - if (hotk->methods->mt_ledd) - remove_proc_entry(PROC_LEDD, acpi_device_dir(device)); - if (hotk->methods->mt_bt_switch) - remove_proc_entry(PROC_BT, acpi_device_dir(device)); - if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) - remove_proc_entry(PROC_LCD, acpi_device_dir(device)); - if ((hotk->methods->brightness_up - && hotk->methods->brightness_down) - || (hotk->methods->brightness_get - && hotk->methods->brightness_set)) - remove_proc_entry(PROC_BRN, acpi_device_dir(device)); - if (hotk->methods->display_set) - remove_proc_entry(PROC_DISP, acpi_device_dir(device)); - } - return 0; -} - -static void asus_hotk_notify(struct acpi_device *device, u32 event) -{ - /* TODO Find a better way to handle events count. */ - if (!hotk) - return; - - /* - * The BIOS *should* be sending us device events, but apparently - * Asus uses system events instead, so just ignore any device - * events we get. - */ - if (event > ACPI_MAX_SYS_NOTIFY) - return; - - if ((event & ~((u32) BR_UP)) < 16) - hotk->brightness = (event & ~((u32) BR_UP)); - else if ((event & ~((u32) BR_DOWN)) < 16) - hotk->brightness = (event & ~((u32) BR_DOWN)); - - acpi_bus_generate_proc_event(hotk->device, event, - hotk->event_count[event % 128]++); - - return; -} - -/* - * Match the model string to the list of supported models. Return END_MODEL if - * no match or model is NULL. - */ -static int asus_model_match(char *model) -{ - if (model == NULL) - return END_MODEL; - - if (strncmp(model, "L3D", 3) == 0) - return L3D; - else if (strncmp(model, "L2E", 3) == 0 || - strncmp(model, "L3H", 3) == 0 || strncmp(model, "L5D", 3) == 0) - return L3H; - else if (strncmp(model, "L3", 2) == 0 || strncmp(model, "L2B", 3) == 0) - return L3C; - else if (strncmp(model, "L8L", 3) == 0) - return L8L; - else if (strncmp(model, "L4R", 3) == 0) - return L4R; - else if (strncmp(model, "M6N", 3) == 0 || strncmp(model, "W3N", 3) == 0) - return M6N; - else if (strncmp(model, "M6R", 3) == 0 || strncmp(model, "A3G", 3) == 0) - return M6R; - else if (strncmp(model, "M2N", 3) == 0 || - strncmp(model, "M3N", 3) == 0 || - strncmp(model, "M5N", 3) == 0 || - strncmp(model, "S1N", 3) == 0 || - strncmp(model, "S5N", 3) == 0) - return xxN; - else if (strncmp(model, "M1", 2) == 0) - return M1A; - else if (strncmp(model, "M2", 2) == 0 || strncmp(model, "L4E", 3) == 0) - return M2E; - else if (strncmp(model, "L2", 2) == 0) - return L2D; - else if (strncmp(model, "L8", 2) == 0) - return S1x; - else if (strncmp(model, "D1", 2) == 0) - return D1x; - else if (strncmp(model, "A1", 2) == 0) - return A1x; - else if (strncmp(model, "A2", 2) == 0) - return A2x; - else if (strncmp(model, "J1", 2) == 0) - return S2x; - else if (strncmp(model, "L5", 2) == 0) - return L5x; - else if (strncmp(model, "A4G", 3) == 0) - return A4G; - else if (strncmp(model, "W1N", 3) == 0) - return W1N; - else if (strncmp(model, "W3V", 3) == 0) - return W3V; - else if (strncmp(model, "W5A", 3) == 0) - return W5A; - else if (strncmp(model, "R1F", 3) == 0) - return R1F; - else if (strncmp(model, "A4S", 3) == 0) - return A4S; - else if (strncmp(model, "F3Sa", 4) == 0) - return F3Sa; - else - return END_MODEL; -} - -/* - * This function is used to initialize the hotk with right values. In this - * method, we can make all the detection we want, and modify the hotk struct - */ -static int asus_hotk_get_info(void) -{ - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - union acpi_object *model = NULL; - int bsts_result; - char *string = NULL; - acpi_status status; - - /* - * Get DSDT headers early enough to allow for differentiating between - * models, but late enough to allow acpi_bus_register_driver() to fail - * before doing anything ACPI-specific. Should we encounter a machine, - * which needs special handling (i.e. its hotkey device has a different - * HID), this bit will be moved. A global variable asus_info contains - * the DSDT header. - */ - status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info); - if (ACPI_FAILURE(status)) - pr_warn(" Couldn't get the DSDT table header\n"); - - /* We have to write 0 on init this far for all ASUS models */ - if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) { - pr_err(" Hotkey initialization failed\n"); - return -ENODEV; - } - - /* This needs to be called for some laptops to init properly */ - if (!read_acpi_int(hotk->handle, "BSTS", &bsts_result)) - pr_warn(" Error calling BSTS\n"); - else if (bsts_result) - pr_notice(" BSTS called, 0x%02x returned\n", bsts_result); - - /* - * Try to match the object returned by INIT to the specific model. - * Handle every possible object (or the lack of thereof) the DSDT - * writers might throw at us. When in trouble, we pass NULL to - * asus_model_match() and try something completely different. - */ - if (buffer.pointer) { - model = buffer.pointer; - switch (model->type) { - case ACPI_TYPE_STRING: - string = model->string.pointer; - break; - case ACPI_TYPE_BUFFER: - string = model->buffer.pointer; - break; - default: - kfree(model); - model = NULL; - break; - } - } - hotk->model = asus_model_match(string); - if (hotk->model == END_MODEL) { /* match failed */ - if (asus_info && - strncmp(asus_info->oem_table_id, "ODEM", 4) == 0) { - hotk->model = P30; - pr_notice(" Samsung P30 detected, supported\n"); - hotk->methods = &model_conf[hotk->model]; - kfree(model); - return 0; - } else { - hotk->model = M2E; - pr_notice(" unsupported model %s, trying default values\n", - string); - pr_notice(" send /proc/acpi/dsdt to the developers\n"); - kfree(model); - return -ENODEV; - } - } - hotk->methods = &model_conf[hotk->model]; - pr_notice(" %s model detected, supported\n", string); - - /* Sort of per-model blacklist */ - if (strncmp(string, "L2B", 3) == 0) - hotk->methods->lcd_status = NULL; - /* L2B is similar enough to L3C to use its settings, with this only - exception */ - else if (strncmp(string, "A3G", 3) == 0) - hotk->methods->lcd_status = "\\BLFG"; - /* A3G is like M6R */ - else if (strncmp(string, "S5N", 3) == 0 || - strncmp(string, "M5N", 3) == 0 || - strncmp(string, "W3N", 3) == 0) - hotk->methods->mt_mled = NULL; - /* S5N, M5N and W3N have no MLED */ - else if (strncmp(string, "L5D", 3) == 0) - hotk->methods->mt_wled = NULL; - /* L5D's WLED is not controlled by ACPI */ - else if (strncmp(string, "M2N", 3) == 0 || - strncmp(string, "W3V", 3) == 0 || - strncmp(string, "S1N", 3) == 0) - hotk->methods->mt_wled = "WLED"; - /* M2N, S1N and W3V have a usable WLED */ - else if (asus_info) { - if (strncmp(asus_info->oem_table_id, "L1", 2) == 0) - hotk->methods->mled_status = NULL; - /* S1300A reports L84F, but L1400B too, account for that */ - } - - kfree(model); - - return 0; -} - -static int asus_hotk_check(void) -{ - int result = 0; - - result = acpi_bus_get_status(hotk->device); - if (result) - return result; - - if (hotk->device->status.present) { - result = asus_hotk_get_info(); - } else { - pr_err(" Hotkey device not present, aborting\n"); - return -EINVAL; - } - - return result; -} - -static int asus_hotk_found; - -static int asus_hotk_add(struct acpi_device *device) -{ - acpi_status status = AE_OK; - int result; - - pr_notice("Asus Laptop ACPI Extras version %s\n", ASUS_ACPI_VERSION); - - hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL); - if (!hotk) - return -ENOMEM; - - hotk->handle = device->handle; - strcpy(acpi_device_name(device), ACPI_HOTK_DEVICE_NAME); - strcpy(acpi_device_class(device), ACPI_HOTK_CLASS); - device->driver_data = hotk; - hotk->device = device; - - result = asus_hotk_check(); - if (result) - goto end; - - result = asus_hotk_add_fs(device); - if (result) - goto end; - - /* For laptops without GPLV: init the hotk->brightness value */ - if ((!hotk->methods->brightness_get) - && (!hotk->methods->brightness_status) - && (hotk->methods->brightness_up && hotk->methods->brightness_down)) { - status = - acpi_evaluate_object(NULL, hotk->methods->brightness_down, - NULL, NULL); - if (ACPI_FAILURE(status)) - pr_warn(" Error changing brightness\n"); - else { - status = - acpi_evaluate_object(NULL, - hotk->methods->brightness_up, - NULL, NULL); - if (ACPI_FAILURE(status)) - pr_warn(" Strange, error changing brightness\n"); - } - } - - asus_hotk_found = 1; - - /* LED display is off by default */ - hotk->ledd_status = 0xFFF; - -end: - if (result) - kfree(hotk); - - return result; -} - -static int asus_hotk_remove(struct acpi_device *device, int type) -{ - asus_hotk_remove_fs(device); - - kfree(hotk); - - return 0; -} - -static const struct backlight_ops asus_backlight_data = { - .get_brightness = read_brightness, - .update_status = set_brightness_status, -}; - -static void asus_acpi_exit(void) -{ - if (asus_backlight_device) - backlight_device_unregister(asus_backlight_device); - - acpi_bus_unregister_driver(&asus_hotk_driver); - remove_proc_entry(PROC_ASUS, acpi_root_dir); - - return; -} - -static int __init asus_acpi_init(void) -{ - struct backlight_properties props; - int result; - - result = acpi_bus_register_driver(&asus_hotk_driver); - if (result < 0) - return result; - - asus_proc_dir = proc_mkdir(PROC_ASUS, acpi_root_dir); - if (!asus_proc_dir) { - pr_err("Unable to create /proc entry\n"); - acpi_bus_unregister_driver(&asus_hotk_driver); - return -ENODEV; - } - - /* - * This is a bit of a kludge. We only want this module loaded - * for ASUS systems, but there's currently no way to probe the - * ACPI namespace for ASUS HIDs. So we just return failure if - * we didn't find one, which will cause the module to be - * unloaded. - */ - if (!asus_hotk_found) { - acpi_bus_unregister_driver(&asus_hotk_driver); - remove_proc_entry(PROC_ASUS, acpi_root_dir); - return -ENODEV; - } - - memset(&props, 0, sizeof(struct backlight_properties)); - props.type = BACKLIGHT_PLATFORM; - props.max_brightness = 15; - asus_backlight_device = backlight_device_register("asus", NULL, NULL, - &asus_backlight_data, - &props); - if (IS_ERR(asus_backlight_device)) { - pr_err("Could not register asus backlight device\n"); - asus_backlight_device = NULL; - asus_acpi_exit(); - return -ENODEV; - } - - return 0; -} - -module_init(asus_acpi_init); -module_exit(asus_acpi_exit);