From: Thierry Reding Date: Wed, 16 Apr 2014 08:55:25 +0000 (+0200) Subject: drm/tegra: hdmi - Fix disable sequence X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=7e2464304ba71dc1b4ae89171529f0d004a2637c;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git drm/tegra: hdmi - Fix disable sequence For some reason when the PW*_ENABLE and PM*_ENABLE fields are cleared during disable, the HDMI output stops working properly. Resetting and initializing doesn't help. Comment out those accesses for now until it has been determined what to do about them. Signed-off-by: Thierry Reding --- diff --git a/drivers/gpu/drm/tegra/hdmi.c b/drivers/gpu/drm/tegra/hdmi.c index 9cba9bf14079..ab64ad1e0373 100644 --- a/drivers/gpu/drm/tegra/hdmi.c +++ b/drivers/gpu/drm/tegra/hdmi.c @@ -942,10 +942,18 @@ static int tegra_output_hdmi_disable(struct tegra_output *output) * sure it's only executed when the output is attached to one. */ if (dc) { + /* + * XXX: We can't do this here because it causes HDMI to go + * into an erroneous state with the result that HDMI won't + * properly work once disabled. See also a similar symptom + * for the SOR output. + */ + /* value = tegra_dc_readl(dc, DC_CMD_DISPLAY_POWER_CONTROL); value &= ~(PW0_ENABLE | PW1_ENABLE | PW2_ENABLE | PW3_ENABLE | PW4_ENABLE | PM0_ENABLE | PM1_ENABLE); tegra_dc_writel(dc, value, DC_CMD_DISPLAY_POWER_CONTROL); + */ value = tegra_dc_readl(dc, DC_CMD_DISPLAY_COMMAND); value &= ~DISP_CTRL_MODE_MASK;