From: Linus Torvalds Date: Fri, 24 Jan 2014 02:56:08 +0000 (-0800) Subject: Merge tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette... X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=7e21774db5cc9cf8fe93a64a2f0c6cf47db8ab24;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git Merge tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette/linux Pull clk framework changes from Mike Turquette: "The first half of the clk framework pull request is made up almost entirely of new platform/driver support. There are some conversions of existing drivers to the common-clock Device Tree binding, and a few non-critical fixes to the framework. Due to an entirely unnecessary cyclical dependency with the arm-soc tree this pull request is broken into two pieces. The second piece will be sent out after arm-soc sends you the pull request that merged in core support for the HiSilicon 3620 platform. That same pull request from arm-soc depends on this pull request to merge in those HiSilicon bits without causing build failures" [ Just did the ARM SoC merges, so getting ready for the second clk tree pull request - Linus ] * tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette/linux: (97 commits) devicetree: bindings: Document qcom,mmcc devicetree: bindings: Document qcom,gcc clk: qcom: Add support for MSM8660's global clock controller (GCC) clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC) clk: qcom: Add support for MSM8974's global clock controller (GCC) clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC) clk: qcom: Add support for MSM8960's global clock controller (GCC) clk: qcom: Add reset controller support clk: qcom: Add support for branches/gate clocks clk: qcom: Add support for root clock generators (RCGs) clk: qcom: Add support for phase locked loops (PLLs) clk: qcom: Add a regmap type clock struct clk: Add set_rate_and_parent() op reset: Silence warning in reset-controller.h clk: sirf: re-arch to make the codes support both prima2 and atlas6 clk: composite: pass mux_hw into determine_rate clk: shmobile: Fix MSTP clock array initialization clk: shmobile: Fix MSTP clock index ARM: dts: Add clock provider specific properties to max77686 node clk: max77686: Register OF clock provider ... --- 7e21774db5cc9cf8fe93a64a2f0c6cf47db8ab24 diff --cc arch/arm/boot/dts/exynos5250-cros-common.dtsi index 9a61494f45f5,000000000000..2c1560d52f1a mode 100644,000000..100644 --- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi @@@ -1,318 -1,0 +1,319 @@@ +/* + * Common device tree include for all Exynos 5250 boards based off of Daisy. + * + * Copyright (c) 2012 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + aliases { + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + }; + + pinctrl@11400000 { + /* + * Disabled pullups since external part has its own pullups and + * double-pulling gets us out of spec in some cases. + */ + i2c2_bus: i2c2-bus { + samsung,pin-pud = <0>; + }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + i2c@12C60000 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + max77686@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; + wakeup-source; + reg = <0x09>; ++ #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "P1.0V_LDO_OUT1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "P1.8V_LDO_OUT2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "P1.8V_LDO_OUT3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "P1.35V_BUCK_OUT6"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "P2.0V_BUCK_OUT7"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "P2.85V_BUCK_OUT8"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + }; + }; + }; + + i2c@12C70000 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + trackpad { + reg = <0x67>; + compatible = "cypress,cyapa"; + interrupts = <2 0>; + interrupt-parent = <&gpx1>; + wakeup-source; + }; + }; + + i2c@12C80000 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; + }; + + i2c@12C90000 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + }; + + i2c@12CA0000 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + }; + + i2c@12CB0000 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + }; + + i2c@12CD0000 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + }; + + i2c@12CE0000 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; + }; + + mmc@12200000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; + + mmc@12220000 { + num-slots = <1>; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + wp-gpios = <&gpc2 1 0>; + }; + }; + + mmc@12230000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + /* See board-specific dts files for pin setup */ + + slot@0 { + reg = <0>; + bus-width = <4>; + }; + }; + + spi_1: spi@12d30000 { + status = "okay"; + samsung,spi-src-clk = <0>; + num-cs = <1>; + }; + + hdmi { + hpd-gpio = <&gpx3 7 0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpx1 3 1>; + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; +}; diff --cc drivers/clk/samsung/clk-exynos4.c index 3852e44db0f8,2f7e440aebf8..010f071af883 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@@ -498,64 -437,63 +437,64 @@@ static struct samsung_mux_clock exynos4 /* list of divider clocks supported in all exynos4 soc's */ static struct samsung_div_clock exynos4_div_clks[] __initdata = { - DIV(none, "div_core", "mout_core", DIV_CPU0, 0, 3), - DIV(none, "div_core2", "div_core", DIV_CPU0, 28, 3), - DIV(none, "div_fimc0", "mout_fimc0", DIV_CAM, 0, 4), - DIV(none, "div_fimc1", "mout_fimc1", DIV_CAM, 4, 4), - DIV(none, "div_fimc2", "mout_fimc2", DIV_CAM, 8, 4), - DIV(none, "div_fimc3", "mout_fimc3", DIV_CAM, 12, 4), - DIV(none, "div_cam0", "mout_cam0", DIV_CAM, 16, 4), - DIV(none, "div_cam1", "mout_cam1", DIV_CAM, 20, 4), - DIV(none, "div_csis0", "mout_csis0", DIV_CAM, 24, 4), - DIV(none, "div_csis1", "mout_csis1", DIV_CAM, 28, 4), - DIV(sclk_mfc, "sclk_mfc", "mout_mfc", DIV_MFC, 0, 4), - DIV_F(none, "div_g3d", "mout_g3d", DIV_G3D, 0, 4, + DIV(0, "div_core", "mout_core", DIV_CPU0, 0, 3), + DIV(0, "div_core2", "div_core", DIV_CPU0, 28, 3), + DIV(0, "div_fimc0", "mout_fimc0", DIV_CAM, 0, 4), + DIV(0, "div_fimc1", "mout_fimc1", DIV_CAM, 4, 4), + DIV(0, "div_fimc2", "mout_fimc2", DIV_CAM, 8, 4), + DIV(0, "div_fimc3", "mout_fimc3", DIV_CAM, 12, 4), + DIV(0, "div_cam0", "mout_cam0", DIV_CAM, 16, 4), + DIV(0, "div_cam1", "mout_cam1", DIV_CAM, 20, 4), + DIV(0, "div_csis0", "mout_csis0", DIV_CAM, 24, 4), + DIV(0, "div_csis1", "mout_csis1", DIV_CAM, 28, 4), + DIV(CLK_SCLK_MFC, "sclk_mfc", "mout_mfc", DIV_MFC, 0, 4), + DIV_F(0, "div_g3d", "mout_g3d", DIV_G3D, 0, 4, CLK_SET_RATE_PARENT, 0), - DIV(none, "div_fimd0", "mout_fimd0", DIV_LCD0, 0, 4), - DIV(none, "div_mipi0", "mout_mipi0", DIV_LCD0, 16, 4), - DIV(none, "div_audio0", "mout_audio0", DIV_MAUDIO, 0, 4), - DIV(sclk_pcm0, "sclk_pcm0", "sclk_audio0", DIV_MAUDIO, 4, 8), - DIV(none, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4), - DIV(none, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4), - DIV(none, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4), - DIV(none, "div_mmc3", "mout_mmc3", DIV_FSYS2, 16, 4), - DIV(sclk_pixel, "sclk_pixel", "sclk_vpll", DIV_TV, 0, 4), - DIV(aclk100, "aclk100", "mout_aclk100", DIV_TOP, 4, 4), - DIV(aclk160, "aclk160", "mout_aclk160", DIV_TOP, 8, 3), - DIV(aclk133, "aclk133", "mout_aclk133", DIV_TOP, 12, 3), - DIV(none, "div_onenand", "mout_onenand1", DIV_TOP, 16, 3), - DIV(sclk_slimbus, "sclk_slimbus", "sclk_epll", DIV_PERIL3, 4, 4), - DIV(sclk_pcm1, "sclk_pcm1", "sclk_audio1", DIV_PERIL4, 4, 8), - DIV(sclk_pcm2, "sclk_pcm2", "sclk_audio2", DIV_PERIL4, 20, 8), - DIV(sclk_i2s1, "sclk_i2s1", "sclk_audio1", DIV_PERIL5, 0, 6), - DIV(sclk_i2s2, "sclk_i2s2", "sclk_audio2", DIV_PERIL5, 8, 6), - DIV(none, "div_mmc4", "mout_mmc4", DIV_FSYS3, 0, 4), - DIV_F(none, "div_mmc_pre4", "div_mmc4", DIV_FSYS3, 8, 8, + DIV(0, "div_fimd0", "mout_fimd0", DIV_LCD0, 0, 4), + DIV(0, "div_mipi0", "mout_mipi0", DIV_LCD0, 16, 4), + DIV(0, "div_audio0", "mout_audio0", DIV_MAUDIO, 0, 4), + DIV(CLK_SCLK_PCM0, "sclk_pcm0", "sclk_audio0", DIV_MAUDIO, 4, 8), + DIV(0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4), + DIV(0, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4), + DIV(0, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4), + DIV(0, "div_mmc3", "mout_mmc3", DIV_FSYS2, 16, 4), + DIV(CLK_SCLK_PIXEL, "sclk_pixel", "sclk_vpll", DIV_TV, 0, 4), + DIV(CLK_ACLK100, "aclk100", "mout_aclk100", DIV_TOP, 4, 4), + DIV(CLK_ACLK160, "aclk160", "mout_aclk160", DIV_TOP, 8, 3), + DIV(CLK_ACLK133, "aclk133", "mout_aclk133", DIV_TOP, 12, 3), + DIV(0, "div_onenand", "mout_onenand1", DIV_TOP, 16, 3), + DIV(CLK_SCLK_SLIMBUS, "sclk_slimbus", "sclk_epll", DIV_PERIL3, 4, 4), + DIV(CLK_SCLK_PCM1, "sclk_pcm1", "sclk_audio1", DIV_PERIL4, 4, 8), + DIV(CLK_SCLK_PCM2, "sclk_pcm2", "sclk_audio2", DIV_PERIL4, 20, 8), + DIV(CLK_SCLK_I2S1, "sclk_i2s1", "sclk_audio1", DIV_PERIL5, 0, 6), + DIV(CLK_SCLK_I2S2, "sclk_i2s2", "sclk_audio2", DIV_PERIL5, 8, 6), + DIV(0, "div_mmc4", "mout_mmc4", DIV_FSYS3, 0, 4), - DIV(0, "div_mmc_pre4", "div_mmc4", DIV_FSYS3, 8, 8), ++ DIV_F(0, "div_mmc_pre4", "div_mmc4", DIV_FSYS3, 8, 8, + CLK_SET_RATE_PARENT, 0), - DIV(none, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4), - DIV(none, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4), - DIV(none, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4), - DIV(none, "div_uart3", "mout_uart3", DIV_PERIL0, 12, 4), - DIV(none, "div_uart4", "mout_uart4", DIV_PERIL0, 16, 4), - DIV(none, "div_spi0", "mout_spi0", DIV_PERIL1, 0, 4), - DIV(none, "div_spi_pre0", "div_spi0", DIV_PERIL1, 8, 8), - DIV(none, "div_spi1", "mout_spi1", DIV_PERIL1, 16, 4), - DIV(none, "div_spi_pre1", "div_spi1", DIV_PERIL1, 24, 8), - DIV(none, "div_spi2", "mout_spi2", DIV_PERIL2, 0, 4), - DIV(none, "div_spi_pre2", "div_spi2", DIV_PERIL2, 8, 8), - DIV(none, "div_audio1", "mout_audio1", DIV_PERIL4, 0, 4), - DIV(none, "div_audio2", "mout_audio2", DIV_PERIL4, 16, 4), - DIV(arm_clk, "arm_clk", "div_core2", DIV_CPU0, 28, 3), - DIV(sclk_apll, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3), - DIV_F(none, "div_mipi_pre0", "div_mipi0", DIV_LCD0, 20, 4, + DIV(0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4), + DIV(0, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4), + DIV(0, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4), + DIV(0, "div_uart3", "mout_uart3", DIV_PERIL0, 12, 4), + DIV(0, "div_uart4", "mout_uart4", DIV_PERIL0, 16, 4), + DIV(0, "div_spi0", "mout_spi0", DIV_PERIL1, 0, 4), + DIV(0, "div_spi_pre0", "div_spi0", DIV_PERIL1, 8, 8), + DIV(0, "div_spi1", "mout_spi1", DIV_PERIL1, 16, 4), + DIV(0, "div_spi_pre1", "div_spi1", DIV_PERIL1, 24, 8), + DIV(0, "div_spi2", "mout_spi2", DIV_PERIL2, 0, 4), + DIV(0, "div_spi_pre2", "div_spi2", DIV_PERIL2, 8, 8), + DIV(0, "div_audio1", "mout_audio1", DIV_PERIL4, 0, 4), + DIV(0, "div_audio2", "mout_audio2", DIV_PERIL4, 16, 4), + DIV(CLK_ARM_CLK, "arm_clk", "div_core2", DIV_CPU0, 28, 3), + DIV(CLK_SCLK_APLL, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3), + DIV_F(0, "div_mipi_pre0", "div_mipi0", DIV_LCD0, 20, 4, CLK_SET_RATE_PARENT, 0), - DIV_F(none, "div_mmc_pre0", "div_mmc0", DIV_FSYS1, 8, 8, + DIV_F(0, "div_mmc_pre0", "div_mmc0", DIV_FSYS1, 8, 8, CLK_SET_RATE_PARENT, 0), - DIV_F(none, "div_mmc_pre1", "div_mmc1", DIV_FSYS1, 24, 8, + DIV_F(0, "div_mmc_pre1", "div_mmc1", DIV_FSYS1, 24, 8, CLK_SET_RATE_PARENT, 0), - DIV_F(none, "div_mmc_pre2", "div_mmc2", DIV_FSYS2, 8, 8, + DIV_F(0, "div_mmc_pre2", "div_mmc2", DIV_FSYS2, 8, 8, CLK_SET_RATE_PARENT, 0), - DIV_F(none, "div_mmc_pre3", "div_mmc3", DIV_FSYS2, 24, 8, + DIV_F(0, "div_mmc_pre3", "div_mmc3", DIV_FSYS2, 24, 8, CLK_SET_RATE_PARENT, 0), };