From: Yaniv Rosner Date: Sat, 28 Sep 2013 05:46:11 +0000 (+0300) Subject: bnx2x: Add support for EXTPHY2 LED mode X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=7dc950ca590cecb379048eb2581273023afc1796;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git bnx2x: Add support for EXTPHY2 LED mode Add new LED mode for the BCM848xx to support new board type. Signed-off-by: Yaniv Rosner Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h index 32767f6aa33f..cf1df8b62e2c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h @@ -172,6 +172,7 @@ struct shared_hw_cfg { /* NVRAM Offset */ #define SHARED_HW_CFG_LED_MAC4 0x000c0000 #define SHARED_HW_CFG_LED_PHY8 0x000d0000 #define SHARED_HW_CFG_LED_EXTPHY1 0x000e0000 + #define SHARED_HW_CFG_LED_EXTPHY2 0x000f0000 #define SHARED_HW_CFG_AN_ENABLE_MASK 0x3f000000 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 92112e242f7f..c60cf43eea08 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -6344,9 +6344,15 @@ int bnx2x_set_led(struct link_params *params, * intended override. */ break; - } else + } else { + u32 nig_led_mode = ((params->hw_led_mode << + SHARED_HW_CFG_LED_MODE_SHIFT) == + SHARED_HW_CFG_LED_EXTPHY2) ? + (SHARED_HW_CFG_LED_PHY1 >> + SHARED_HW_CFG_LED_MODE_SHIFT) : hw_led_mode; REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, - hw_led_mode); + nig_led_mode); + } REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0); /* Set blinking rate to ~15.9Hz */ @@ -10608,10 +10614,18 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, 0x40); } else { + /* EXTPHY2 LED mode indicate that the 100M/1G/10G LED + * sources are all wired through LED1, rather than only + * 10G in other modes. + */ + val = ((params->hw_led_mode << + SHARED_HW_CFG_LED_MODE_SHIFT) == + SHARED_HW_CFG_LED_EXTPHY2) ? 0x98 : 0x80; + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED1_MASK, - 0x80); + val); /* Tell LED3 to blink on source */ bnx2x_cl45_read(bp, phy,