From: Ville Syrjälä Date: Thu, 30 Oct 2014 17:42:50 +0000 (+0200) Subject: drm/i915: Apply some ocd for IMR vs. IER order during irq enable X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=7d1bd53931e5afe5b2549c045ed4afad71ee6e8f;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git drm/i915: Apply some ocd for IMR vs. IER order during irq enable When disabling interrupts we do the writes in this order: IMR,IER,IIR,IIR. But when enabling interrupts we don't do use the mirrored order, and instead do IIR,IIR,IMR,IER. I like consistency unless there's a good reason against it, which I can't think of here, so change the enable order to IIR,IIR,IER,IMR. Signed-off-by: Ville Syrjälä Reviewed-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index a2b013d97fb6..98a8d650768b 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -126,16 +126,16 @@ static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */ #define GEN8_IRQ_INIT_NDX(type, which, imr_val, ier_val) do { \ GEN5_ASSERT_IIR_IS_ZERO(GEN8_##type##_IIR(which)); \ - I915_WRITE(GEN8_##type##_IMR(which), (imr_val)); \ I915_WRITE(GEN8_##type##_IER(which), (ier_val)); \ - POSTING_READ(GEN8_##type##_IER(which)); \ + I915_WRITE(GEN8_##type##_IMR(which), (imr_val)); \ + POSTING_READ(GEN8_##type##_IMR(which)); \ } while (0) #define GEN5_IRQ_INIT(type, imr_val, ier_val) do { \ GEN5_ASSERT_IIR_IS_ZERO(type##IIR); \ - I915_WRITE(type##IMR, (imr_val)); \ I915_WRITE(type##IER, (ier_val)); \ - POSTING_READ(type##IER); \ + I915_WRITE(type##IMR, (imr_val)); \ + POSTING_READ(type##IMR); \ } while (0) /* For display hotplug interrupt */