From: Greg Ungerer Date: Mon, 12 Sep 2005 01:18:10 +0000 (+1000) Subject: [PATCH] m68knommu: add SPI register definitions for 528x processors X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=7ce4d42503949b62f481be989d8f5a25f5af10ff;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git [PATCH] m68knommu: add SPI register definitions for 528x processors Add QSPI register definitions of ColdFIre 528x processor SPI controller. Patch originally submitted by Derek Cheung Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- diff --git a/include/asm-m68knommu/m528xsim.h b/include/asm-m68knommu/m528xsim.h index 371993a206ac..610774a17f70 100644 --- a/include/asm-m68knommu/m528xsim.h +++ b/include/asm-m68knommu/m528xsim.h @@ -41,5 +41,117 @@ #define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ #define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ +/* + * Derek Cheung - 6 Feb 2005 + * add I2C and QSPI register definition using Freescale's MCF5282 + */ +/* set Port AS pin for I2C or UART */ +#define MCF5282_GPIO_PASPAR (volatile u16 *) (MCF_IPSBAR + 0x00100056) + +/* Interrupt Mask Register Register Low */ +#define MCF5282_INTC0_IMRL (volatile u32 *) (MCF_IPSBAR + 0x0C0C) +/* Interrupt Control Register 7 */ +#define MCF5282_INTC0_ICR17 (volatile u8 *) (MCF_IPSBAR + 0x0C51) + + + +/********************************************************************* +* +* Inter-IC (I2C) Module +* +*********************************************************************/ +/* Read/Write access macros for general use */ +#define MCF5282_I2C_I2ADR (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address +#define MCF5282_I2C_I2FDR (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider +#define MCF5282_I2C_I2CR (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control +#define MCF5282_I2C_I2SR (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status +#define MCF5282_I2C_I2DR (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O + +/* Bit level definitions and macros */ +#define MCF5282_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) + +#define MCF5282_I2C_I2FDR_IC(x) (((x)&0x3F)) + +#define MCF5282_I2C_I2CR_IEN (0x80) // I2C enable +#define MCF5282_I2C_I2CR_IIEN (0x40) // interrupt enable +#define MCF5282_I2C_I2CR_MSTA (0x20) // master/slave mode +#define MCF5282_I2C_I2CR_MTX (0x10) // transmit/receive mode +#define MCF5282_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable +#define MCF5282_I2C_I2CR_RSTA (0x04) // repeat start + +#define MCF5282_I2C_I2SR_ICF (0x80) // data transfer bit +#define MCF5282_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave +#define MCF5282_I2C_I2SR_IBB (0x20) // I2C bus busy +#define MCF5282_I2C_I2SR_IAL (0x10) // aribitration lost +#define MCF5282_I2C_I2SR_SRW (0x04) // slave read/write +#define MCF5282_I2C_I2SR_IIF (0x02) // I2C interrupt +#define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge + + + +/********************************************************************* +* +* Queued Serial Peripheral Interface (QSPI) Module +* +*********************************************************************/ +/* Derek - 21 Feb 2005 */ +/* change to the format used in I2C */ +/* Read/Write access macros for general use */ +#define MCF5282_QSPI_QMR MCF_IPSBAR + 0x0340 +#define MCF5282_QSPI_QDLYR MCF_IPSBAR + 0x0344 +#define MCF5282_QSPI_QWR MCF_IPSBAR + 0x0348 +#define MCF5282_QSPI_QIR MCF_IPSBAR + 0x034C +#define MCF5282_QSPI_QAR MCF_IPSBAR + 0x0350 +#define MCF5282_QSPI_QDR MCF_IPSBAR + 0x0354 +#define MCF5282_QSPI_QCR MCF_IPSBAR + 0x0354 + +/* Bit level definitions and macros */ +#define MCF5282_QSPI_QMR_MSTR (0x8000) +#define MCF5282_QSPI_QMR_DOHIE (0x4000) +#define MCF5282_QSPI_QMR_BITS_16 (0x0000) +#define MCF5282_QSPI_QMR_BITS_8 (0x2000) +#define MCF5282_QSPI_QMR_BITS_9 (0x2400) +#define MCF5282_QSPI_QMR_BITS_10 (0x2800) +#define MCF5282_QSPI_QMR_BITS_11 (0x2C00) +#define MCF5282_QSPI_QMR_BITS_12 (0x3000) +#define MCF5282_QSPI_QMR_BITS_13 (0x3400) +#define MCF5282_QSPI_QMR_BITS_14 (0x3800) +#define MCF5282_QSPI_QMR_BITS_15 (0x3C00) +#define MCF5282_QSPI_QMR_CPOL (0x0200) +#define MCF5282_QSPI_QMR_CPHA (0x0100) +#define MCF5282_QSPI_QMR_BAUD(x) (((x)&0x00FF)) + +#define MCF5282_QSPI_QDLYR_SPE (0x80) +#define MCF5282_QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) +#define MCF5282_QSPI_QDLYR_DTL(x) (((x)&0x00FF)) + +#define MCF5282_QSPI_QWR_HALT (0x8000) +#define MCF5282_QSPI_QWR_WREN (0x4000) +#define MCF5282_QSPI_QWR_WRTO (0x2000) +#define MCF5282_QSPI_QWR_CSIV (0x1000) +#define MCF5282_QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) +#define MCF5282_QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4) +#define MCF5282_QSPI_QWR_NEWQP(x) (((x)&0x000F)) + +#define MCF5282_QSPI_QIR_WCEFB (0x8000) +#define MCF5282_QSPI_QIR_ABRTB (0x4000) +#define MCF5282_QSPI_QIR_ABRTL (0x1000) +#define MCF5282_QSPI_QIR_WCEFE (0x0800) +#define MCF5282_QSPI_QIR_ABRTE (0x0400) +#define MCF5282_QSPI_QIR_SPIFE (0x0100) +#define MCF5282_QSPI_QIR_WCEF (0x0008) +#define MCF5282_QSPI_QIR_ABRT (0x0004) +#define MCF5282_QSPI_QIR_SPIF (0x0001) + +#define MCF5282_QSPI_QAR_ADDR(x) (((x)&0x003F)) + +#define MCF5282_QSPI_QDR_COMMAND(x) (((x)&0xFF00)) +#define MCF5282_QSPI_QCR_DATA(x) (((x)&0x00FF)<<8) +#define MCF5282_QSPI_QCR_CONT (0x8000) +#define MCF5282_QSPI_QCR_BITSE (0x4000) +#define MCF5282_QSPI_QCR_DT (0x2000) +#define MCF5282_QSPI_QCR_DSCK (0x1000) +#define MCF5282_QSPI_QCR_CS (((x)&0x000F)<<8) + /****************************************************************************/ #endif /* m528xsim_h */