From: John McMaster Date: Mon, 1 Dec 2014 02:27:53 +0000 (-0300) Subject: [media] gspca_touptek: Add support for ToupTek UCMOS series USB cameras X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=7cc42d9f75766246faab4a1436eb02b97041fb41;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git [media] gspca_touptek: Add support for ToupTek UCMOS series USB cameras Adds support for AmScope MU800 / ToupTek UCMOS08000KPB USB microscope camera. Signed-off-by: John McMaster Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/usb/gspca/Kconfig b/drivers/media/usb/gspca/Kconfig index eed10d782535..60af3b167f3b 100644 --- a/drivers/media/usb/gspca/Kconfig +++ b/drivers/media/usb/gspca/Kconfig @@ -395,6 +395,16 @@ config USB_GSPCA_TOPRO To compile this driver as a module, choose M here: the module will be called gspca_topro. +config USB_GSPCA_TOUPTEK + tristate "Touptek USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the ToupTek UCMOS + / AmScope MU series camera. + + To compile this driver as a module, choose M here: the + module will be called gspca_touptek. + config USB_GSPCA_TV8532 tristate "TV8532 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA diff --git a/drivers/media/usb/gspca/Makefile b/drivers/media/usb/gspca/Makefile index f46975e4c82d..9f5ccecb9c8a 100644 --- a/drivers/media/usb/gspca/Makefile +++ b/drivers/media/usb/gspca/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_USB_GSPCA_STK1135) += gspca_stk1135.o obj-$(CONFIG_USB_GSPCA_STV0680) += gspca_stv0680.o obj-$(CONFIG_USB_GSPCA_T613) += gspca_t613.o obj-$(CONFIG_USB_GSPCA_TOPRO) += gspca_topro.o +obj-$(CONFIG_USB_GSPCA_TOUPTEK) += gspca_touptek.o obj-$(CONFIG_USB_GSPCA_TV8532) += gspca_tv8532.o obj-$(CONFIG_USB_GSPCA_VC032X) += gspca_vc032x.o obj-$(CONFIG_USB_GSPCA_VICAM) += gspca_vicam.o @@ -86,6 +87,7 @@ gspca_stv0680-objs := stv0680.o gspca_sunplus-objs := sunplus.o gspca_t613-objs := t613.o gspca_topro-objs := topro.o +gspca_touptek-objs := touptek.o gspca_tv8532-objs := tv8532.o gspca_vc032x-objs := vc032x.o gspca_vicam-objs := vicam.o diff --git a/drivers/media/usb/gspca/touptek.c b/drivers/media/usb/gspca/touptek.c new file mode 100644 index 000000000000..8b7c01e4b772 --- /dev/null +++ b/drivers/media/usb/gspca/touptek.c @@ -0,0 +1,732 @@ +/* + * ToupTek UCMOS / AmScope MU series camera driver + * TODO: contrast with ScopeTek / AmScope MDC cameras + * + * Copyright (C) 2012-2014 John McMaster + * + * Special thanks to Bushing for helping with the decrypt algorithm and + * Sean O'Sullivan / the Rensselaer Center for Open Source + * Software (RCOS) for helping me learn kernel development + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "gspca.h" + +#define MODULE_NAME "touptek" + +MODULE_AUTHOR("John McMaster"); +MODULE_DESCRIPTION("ToupTek UCMOS / Amscope MU microscope camera driver"); +MODULE_LICENSE("GPL"); + +/* +Exposure reg is linear with exposure time +Exposure (sec), E (reg) +0.000400, 0x0002 +0.001000, 0x0005 +0.005000, 0x0019 +0.020000, 0x0064 +0.080000, 0x0190 +0.400000, 0x07D0 +1.000000, 0x1388 +2.000000, 0x2710 + +Three gain stages +0x1000: master channel enable bit +0x007F: low gain bits +0x0080: medium gain bit +0x0100: high gain bit +gain = enable * (1 + regH) * (1 + regM) * z * regL + +Gain implementation +Want to do something similar to mt9v011.c's set_balance + +Gain does not vary with resolution (checked 640x480 vs 1600x1200) + +Constant derivation: + +Raw data: +Gain, GTOP, B, R, GBOT +1.00, 0x105C, 0x1068, 0x10C8, 0x105C +1.20, 0x106E, 0x107E, 0x10D6, 0x106E +1.40, 0x10C0, 0x10CA, 0x10E5, 0x10C0 +1.60, 0x10C9, 0x10D4, 0x10F3, 0x10C9 +1.80, 0x10D2, 0x10DE, 0x11C1, 0x10D2 +2.00, 0x10DC, 0x10E9, 0x11C8, 0x10DC +2.20, 0x10E5, 0x10F3, 0x11CF, 0x10E5 +2.40, 0x10EE, 0x10FE, 0x11D7, 0x10EE +2.60, 0x10F7, 0x11C4, 0x11DE, 0x10F7 +2.80, 0x11C0, 0x11CA, 0x11E5, 0x11C0 +3.00, 0x11C5, 0x11CF, 0x11ED, 0x11C5 + +zR = 0.0069605943152454778 + about 3/431 = 0.0069605568445475635 +zB = 0.0095695970695970703 + about 6/627 = 0.0095693779904306216 +zG = 0.010889328063241107 + about 6/551 = 0.010889292196007259 +about 10 bits for constant + 7 bits for value => at least 17 bit intermediate +with 32 bit ints should be fine for overflow etc +Essentially gains are in range 0-0x001FF + +However, V4L expects a main gain channel + R and B balance +To keep things simple for now saturate the values of balance is too high/low +This isn't really ideal but easy way to fit the Linux model + +Converted using gain model turns out to be quite linear: +Gain, GTOP, B, R, GBOT +1.00, 92, 104, 144, 92 +1.20, 110, 126, 172, 110 +1.40, 128, 148, 202, 128 +1.60, 146, 168, 230, 146 +1.80, 164, 188, 260, 164 +2.00, 184, 210, 288, 184 +2.20, 202, 230, 316, 202 +2.40, 220, 252, 348, 220 +2.60, 238, 272, 376, 238 +2.80, 256, 296, 404, 256 +3.00, 276, 316, 436, 276 + +Maximum gain is 0x7FF * 2 * 2 => 0x1FFC (8188) +or about 13 effective bits of gain +The highest the commercial driver goes in my setup 436 +However, because could *maybe* damage circuits +limit the gain until have a reason to go higher +Solution: gain clipped and warning emitted +*/ +#define GAIN_MAX 511 + +/* Frame sync is a short read */ +#define BULK_SIZE 0x4000 + +/* MT9E001 reg names to give a rough approximation */ +#define REG_COARSE_INTEGRATION_TIME_ 0x3012 +#define REG_GROUPED_PARAMETER_HOLD_ 0x3022 +#define REG_MODE_SELECT 0x0100 +#define REG_OP_SYS_CLK_DIV 0x030A +#define REG_VT_SYS_CLK_DIV 0x0302 +#define REG_PRE_PLL_CLK_DIV 0x0304 +#define REG_VT_PIX_CLK_DIV 0x0300 +#define REG_OP_PIX_CLK_DIV 0x0308 +#define REG_PLL_MULTIPLIER 0x0306 +#define REG_COARSE_INTEGRATION_TIME_ 0x3012 +#define REG_FRAME_LENGTH_LINES 0x0340 +#define REG_FRAME_LENGTH_LINES_ 0x300A +#define REG_GREEN1_GAIN 0x3056 +#define REG_GREEN2_GAIN 0x305C +#define REG_GROUPED_PARAMETER_HOLD 0x0104 +#define REG_LINE_LENGTH_PCK_ 0x300C +#define REG_MODE_SELECT 0x0100 +#define REG_PLL_MULTIPLIER 0x0306 +#define REG_READ_MODE 0x3040 +#define REG_BLUE_GAIN 0x3058 +#define REG_RED_GAIN 0x305A +#define REG_RESET_REGISTER 0x301A +#define REG_SCALE_M 0x0404 +#define REG_SCALING_MODE 0x0400 +#define REG_SOFTWARE_RESET 0x0103 +#define REG_X_ADDR_END 0x0348 +#define REG_X_ADDR_START 0x0344 +#define REG_X_ADDR_START 0x0344 +#define REG_X_OUTPUT_SIZE 0x034C +#define REG_Y_ADDR_END 0x034A +#define REG_Y_ADDR_START 0x0346 +#define REG_Y_OUTPUT_SIZE 0x034E + + +/* specific webcam descriptor */ +struct sd { + struct gspca_dev gspca_dev; /* !! must be the first item */ + /* How many bytes this frame */ + unsigned int this_f; + + /* + Device has separate gains for each Bayer quadrant + V4L supports master gain which is referenced to G1/G2 and supplies + individual balance controls for R/B + */ + struct v4l2_ctrl *blue; + struct v4l2_ctrl *red; +}; + +/* Used to simplify reg write error handling */ +struct cmd { + u16 value; + u16 index; +}; + +static const struct v4l2_pix_format vga_mode[] = { + {800, 600, + V4L2_PIX_FMT_SGRBG8, + V4L2_FIELD_NONE, + .bytesperline = 800, + .sizeimage = 800 * 600, + .colorspace = V4L2_COLORSPACE_SRGB}, + {1600, 1200, + V4L2_PIX_FMT_SGRBG8, + V4L2_FIELD_NONE, + .bytesperline = 1600, + .sizeimage = 1600 * 1200, + .colorspace = V4L2_COLORSPACE_SRGB}, + {3264, 2448, + V4L2_PIX_FMT_SGRBG8, + V4L2_FIELD_NONE, + .bytesperline = 3264, + .sizeimage = 3264 * 2448, + .colorspace = V4L2_COLORSPACE_SRGB}, +}; + +/* +As theres no known frame sync, the only way to keep synced is to try hard +to never miss any packets +*/ +#if MAX_NURBS < 4 +#error "Not enough URBs in the gspca table" +#endif + +static int val_reply(struct gspca_dev *gspca_dev, const char *reply, int rc) +{ + if (rc < 0) { + PERR("reply has error %d", rc); + return -EIO; + } + if (rc != 1) { + PERR("Bad reply size %d", rc); + return -EIO; + } + if (reply[0] != 0x08) { + PERR("Bad reply 0x%02X", reply[0]); + return -EIO; + } + return 0; +} + +static void reg_w(struct gspca_dev *gspca_dev, u16 value, u16 index) +{ + char buff[1]; + int rc; + + PDEBUG(D_USBO, "reg_w bReq=0x0B, bReqT=0xC0, wVal=0x%04X, wInd=0x%04X\n", + value, index); + rc = usb_control_msg(gspca_dev->dev, usb_rcvctrlpipe(gspca_dev->dev, 0), + 0x0B, 0xC0, value, index, buff, 1, 500); + PDEBUG(D_USBO, "rc=%d, ret={0x%02X}", rc, buff[0]); + if (rc < 0) { + PERR("Failed reg_w(0x0B, 0xC0, 0x%04X, 0x%04X) w/ rc %d\n", + value, index, rc); + gspca_dev->usb_err = rc; + return; + } + if (val_reply(gspca_dev, buff, rc)) { + PERR("Bad reply to reg_w(0x0B, 0xC0, 0x%04X, 0x%04X\n", + value, index); + gspca_dev->usb_err = -EIO; + } +} + +static void reg_w_buf(struct gspca_dev *gspca_dev, + const struct cmd *p, int l) +{ + do { + reg_w(gspca_dev, p->value, p->index); + p++; + } while (--l > 0); +} + +static void setexposure(struct gspca_dev *gspca_dev, s32 val) +{ + u16 value; + unsigned int w = gspca_dev->pixfmt.width; + + if (w == 800) + value = val * 5; + else if (w == 1600) + value = val * 3; + else if (w == 3264) + value = val * 3 / 2; + else { + PERR("Invalid width %u\n", w); + gspca_dev->usb_err = -EINVAL; + return; + } + PDEBUG(D_STREAM, "exposure: 0x%04X ms\n", value); + /* Wonder if theres a good reason for sending it twice */ + /* probably not but leave it in because...why not */ + reg_w(gspca_dev, value, REG_COARSE_INTEGRATION_TIME_); + reg_w(gspca_dev, value, REG_COARSE_INTEGRATION_TIME_); +} + +static int gainify(int in) +{ + /* + TODO: check if there are any issues with corner cases + 0x000 (0):0x07F (127): regL + 0x080 (128) - 0x0FF (255): regM, regL + 0x100 (256) - max: regH, regM, regL + */ + if (in <= 0x7F) + return 0x1000 | in; + else if (in <= 0xFF) + return 0x1080 | in / 2; + else + return 0x1180 | in / 4; +} + +static void setggain(struct gspca_dev *gspca_dev, u16 global_gain) +{ + u16 normalized; + + normalized = gainify(global_gain); + PDEBUG(D_STREAM, "gain G1/G2 (0x%04X): 0x%04X (src 0x%04X)\n", + REG_GREEN1_GAIN, + normalized, global_gain); + + reg_w(gspca_dev, normalized, REG_GREEN1_GAIN); + reg_w(gspca_dev, normalized, REG_GREEN2_GAIN); +} + +static void setbgain(struct gspca_dev *gspca_dev, + u16 gain, u16 global_gain) +{ + u16 normalized; + + normalized = global_gain + + ((u32)global_gain) * gain / GAIN_MAX; + if (normalized > GAIN_MAX) { + PDEBUG(D_STREAM, "Truncating blue 0x%04X w/ value 0x%04X\n", + GAIN_MAX, normalized); + normalized = GAIN_MAX; + } + normalized = gainify(normalized); + PDEBUG(D_STREAM, "gain B (0x%04X): 0x%04X w/ source 0x%04X\n", + REG_BLUE_GAIN, normalized, gain); + + reg_w(gspca_dev, normalized, REG_BLUE_GAIN); +} + +static void setrgain(struct gspca_dev *gspca_dev, + u16 gain, u16 global_gain) +{ + u16 normalized; + + normalized = global_gain + + ((u32)global_gain) * gain / GAIN_MAX; + if (normalized > GAIN_MAX) { + PDEBUG(D_STREAM, "Truncating gain 0x%04X w/ value 0x%04X\n", + GAIN_MAX, normalized); + normalized = GAIN_MAX; + } + normalized = gainify(normalized); + PDEBUG(D_STREAM, "gain R (0x%04X): 0x%04X w / source 0x%04X\n", + REG_RED_GAIN, normalized, gain); + + reg_w(gspca_dev, normalized, REG_RED_GAIN); +} + +static void configure_wh(struct gspca_dev *gspca_dev) +{ + unsigned int w = gspca_dev->pixfmt.width; + + PDEBUG(D_STREAM, "configure_wh\n"); + + if (w == 800) { + static const struct cmd reg_init_res[] = { + {0x0060, REG_X_ADDR_START}, + {0x0CD9, REG_X_ADDR_END}, + {0x0036, REG_Y_ADDR_START}, + {0x098F, REG_Y_ADDR_END}, + {0x07C7, REG_READ_MODE}, + }; + + reg_w_buf(gspca_dev, + reg_init_res, ARRAY_SIZE(reg_init_res)); + } else if (w == 1600) { + static const struct cmd reg_init_res[] = { + {0x009C, REG_X_ADDR_START}, + {0x0D19, REG_X_ADDR_END}, + {0x0068, REG_Y_ADDR_START}, + {0x09C5, REG_Y_ADDR_END}, + {0x06C3, REG_READ_MODE}, + }; + + reg_w_buf(gspca_dev, + reg_init_res, ARRAY_SIZE(reg_init_res)); + } else if (w == 3264) { + static const struct cmd reg_init_res[] = { + {0x00E8, REG_X_ADDR_START}, + {0x0DA7, REG_X_ADDR_END}, + {0x009E, REG_Y_ADDR_START}, + {0x0A2D, REG_Y_ADDR_END}, + {0x0241, REG_READ_MODE}, + }; + + reg_w_buf(gspca_dev, + reg_init_res, ARRAY_SIZE(reg_init_res)); + } else { + PERR("bad width %u\n", w); + gspca_dev->usb_err = -EINVAL; + return; + } + + reg_w(gspca_dev, 0x0000, REG_SCALING_MODE); + reg_w(gspca_dev, 0x0010, REG_SCALE_M); + reg_w(gspca_dev, w, REG_X_OUTPUT_SIZE); + reg_w(gspca_dev, gspca_dev->pixfmt.height, REG_Y_OUTPUT_SIZE); + + if (w == 800) { + reg_w(gspca_dev, 0x0384, REG_FRAME_LENGTH_LINES_); + reg_w(gspca_dev, 0x0960, REG_LINE_LENGTH_PCK_); + } else if (w == 1600) { + reg_w(gspca_dev, 0x0640, REG_FRAME_LENGTH_LINES_); + reg_w(gspca_dev, 0x0FA0, REG_LINE_LENGTH_PCK_); + } else if (w == 3264) { + reg_w(gspca_dev, 0x0B4B, REG_FRAME_LENGTH_LINES_); + reg_w(gspca_dev, 0x1F40, REG_LINE_LENGTH_PCK_); + } else { + PERR("bad width %u\n", w); + gspca_dev->usb_err = -EINVAL; + return; + } +} + +/* Packets that were encrypted, no idea if the grouping is significant */ +static void configure_encrypted(struct gspca_dev *gspca_dev) +{ + static const struct cmd reg_init_begin[] = { + {0x0100, REG_SOFTWARE_RESET}, + {0x0000, REG_MODE_SELECT}, + {0x0100, REG_GROUPED_PARAMETER_HOLD}, + {0x0004, REG_VT_PIX_CLK_DIV}, + {0x0001, REG_VT_SYS_CLK_DIV}, + {0x0008, REG_OP_PIX_CLK_DIV}, + {0x0001, REG_OP_SYS_CLK_DIV}, + {0x0004, REG_PRE_PLL_CLK_DIV}, + {0x0040, REG_PLL_MULTIPLIER}, + {0x0000, REG_GROUPED_PARAMETER_HOLD}, + {0x0100, REG_GROUPED_PARAMETER_HOLD}, + }; + static const struct cmd reg_init_end[] = { + {0x0000, REG_GROUPED_PARAMETER_HOLD}, + {0x0301, 0x31AE}, + {0x0805, 0x3064}, + {0x0071, 0x3170}, + {0x10DE, REG_RESET_REGISTER}, + {0x0000, REG_MODE_SELECT}, + {0x0010, REG_PLL_MULTIPLIER}, + {0x0100, REG_MODE_SELECT}, + }; + + PDEBUG(D_STREAM, "Encrypted begin, w = %u\n", gspca_dev->pixfmt.width); + reg_w_buf(gspca_dev, reg_init_begin, ARRAY_SIZE(reg_init_begin)); + configure_wh(gspca_dev); + reg_w_buf(gspca_dev, reg_init_end, ARRAY_SIZE(reg_init_end)); + reg_w(gspca_dev, 0x0100, REG_GROUPED_PARAMETER_HOLD); + reg_w(gspca_dev, 0x0000, REG_GROUPED_PARAMETER_HOLD); + + PDEBUG(D_STREAM, "Encrypted end\n"); +} + +static int configure(struct gspca_dev *gspca_dev) +{ + int rc; + uint8_t buff[4]; + + PDEBUG(D_STREAM, "configure()\n"); + + /* + First driver sets a sort of encryption key + A number of futur requests of this type have wValue and wIndex encrypted + as follows: + -Compute key = this wValue rotate left by 4 bits + (decrypt.py rotates right because we are decrypting) + -Later packets encrypt packets by XOR'ing with key + XOR encrypt/decrypt is symmetrical + wValue, and wIndex are encrypted + bRequest is not and bRequestType is always 0xC0 + This allows resyncing if key is unknown? + By setting 0 we XOR with 0 and the shifting and XOR drops out + */ + rc = usb_control_msg(gspca_dev->dev, usb_rcvctrlpipe(gspca_dev->dev, 0), + 0x16, 0xC0, 0x0000, 0x0000, buff, 2, 500); + if (val_reply(gspca_dev, buff, rc)) { + PERR("failed key req"); + return -EIO; + } + + /* + Next does some sort of 2 packet challenge / response + evidence suggests its an Atmel I2C crypto part but nobody cares to look + (to make sure its not cloned hardware?) + Ignore: I want to work with their hardware, not clone it + 16 bytes out challenge, requestType: 0x40 + 16 bytes in response, requestType: 0xC0 + */ + + rc = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), + 0x01, 0x40, 0x0001, 0x000F, NULL, 0, 500); + if (rc < 0) { + PERR("failed to replay packet 176 w/ rc %d\n", rc); + return rc; + } + + rc = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), + 0x01, 0x40, 0x0000, 0x000F, NULL, 0, 500); + if (rc < 0) { + PERR("failed to replay packet 178 w/ rc %d\n", rc); + return rc; + } + + rc = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), + 0x01, 0x40, 0x0001, 0x000F, NULL, 0, 500); + if (rc < 0) { + PERR("failed to replay packet 180 w/ rc %d\n", rc); + return rc; + } + + /* + Serial number? Doesn't seem to be required + cam1: \xE6\x0D\x00\x00, cam2: \x70\x19\x00\x00 + rc = usb_control_msg(gspca_dev->dev, usb_rcvctrlpipe(gspca_dev->dev, 0), + 0x20, 0xC0, 0x0000, 0x0000, buff, 4, 500); + */ + + /* Large (EEPROM?) read, skip it since no idea what to do with it */ + gspca_dev->usb_err = 0; + configure_encrypted(gspca_dev); + if (gspca_dev->usb_err) + return gspca_dev->usb_err; + + /* Omitted this by accident, does not work without it */ + rc = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), + 0x01, 0x40, 0x0003, 0x000F, NULL, 0, 500); + if (rc < 0) { + PERR("failed to replay final packet w/ rc %d\n", rc); + return rc; + } + + PDEBUG(D_STREAM, "Configure complete\n"); + return 0; +} + +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + gspca_dev->cam.cam_mode = vga_mode; + gspca_dev->cam.nmodes = ARRAY_SIZE(vga_mode); + + /* Yes we want URBs and we want them now! */ + gspca_dev->cam.no_urb_create = 0; + gspca_dev->cam.bulk_nurbs = 4; + /* Largest size the windows driver uses */ + gspca_dev->cam.bulk_size = BULK_SIZE; + /* Def need to use bulk transfers */ + gspca_dev->cam.bulk = 1; + + return 0; +} + +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int rc; + + sd->this_f = 0; + + rc = configure(gspca_dev); + if (rc < 0) { + PERR("Failed configure"); + return rc; + } + /* First two frames have messed up gains + Drop them to avoid special cases in user apps? */ + return 0; +} + +static void sd_pkt_scan(struct gspca_dev *gspca_dev, + u8 *data, /* isoc packet */ + int len) /* iso packet length */ +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (len != BULK_SIZE) { + /* can we finish a frame? */ + if (sd->this_f + len == gspca_dev->pixfmt.sizeimage) { + gspca_frame_add(gspca_dev, LAST_PACKET, data, len); + PDEBUG(D_FRAM, "finish frame sz %u/%u w/ len %u\n", + sd->this_f, gspca_dev->pixfmt.sizeimage, len); + /* lost some data, discard the frame */ + } else { + gspca_frame_add(gspca_dev, DISCARD_PACKET, NULL, 0); + PDEBUG(D_FRAM, "abort frame sz %u/%u w/ len %u\n", + sd->this_f, gspca_dev->pixfmt.sizeimage, len); + } + sd->this_f = 0; + } else { + if (sd->this_f == 0) + gspca_frame_add(gspca_dev, FIRST_PACKET, data, len); + else + gspca_frame_add(gspca_dev, INTER_PACKET, data, len); + sd->this_f += len; + } +} + +static int sd_init(struct gspca_dev *gspca_dev) +{ + return 0; +} + +static int sd_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct gspca_dev *gspca_dev = + container_of(ctrl->handler, struct gspca_dev, ctrl_handler); + struct sd *sd = (struct sd *) gspca_dev; + + gspca_dev->usb_err = 0; + + if (!gspca_dev->streaming) + return 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + setexposure(gspca_dev, ctrl->val); + break; + case V4L2_CID_GAIN: + /* gspca_dev->gain automatically updated */ + setggain(gspca_dev, gspca_dev->gain->val); + break; + case V4L2_CID_BLUE_BALANCE: + sd->blue->val = ctrl->val; + setbgain(gspca_dev, sd->blue->val, gspca_dev->gain->val); + break; + case V4L2_CID_RED_BALANCE: + sd->red->val = ctrl->val; + setrgain(gspca_dev, sd->red->val, gspca_dev->gain->val); + break; + } + return gspca_dev->usb_err; +} + +static const struct v4l2_ctrl_ops sd_ctrl_ops = { + .s_ctrl = sd_s_ctrl, +}; + +static int sd_init_controls(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler; + + gspca_dev->vdev.ctrl_handler = hdl; + v4l2_ctrl_handler_init(hdl, 4); + + gspca_dev->exposure = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, + /* Mostly limited by URB timeouts */ + /* XXX: make dynamic based on frame rate? */ + V4L2_CID_EXPOSURE, 0, 800, 1, 350); + gspca_dev->gain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, + V4L2_CID_GAIN, 0, 511, 1, 128); + sd->blue = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, + V4L2_CID_BLUE_BALANCE, 0, 1023, 1, 80); + sd->red = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, + V4L2_CID_RED_BALANCE, 0, 1023, 1, 295); + + if (hdl->error) { + PERR("Could not initialize controls\n"); + return hdl->error; + } + return 0; +} + +/* sub-driver description */ +static const struct sd_desc sd_desc = { + .name = MODULE_NAME, + .config = sd_config, + .init = sd_init, + .init_controls = sd_init_controls, + .start = sd_start, + .pkt_scan = sd_pkt_scan, +}; + +/* Table of supported USB devices */ +static const struct usb_device_id device_table[] = { + /* Commented out devices should be related */ + /* AS: AmScope, TT: ToupTek */ + /* { USB_DEVICE(0x0547, 0x6035) }, TT UCMOS00350KPA */ + /* { USB_DEVICE(0x0547, 0x6130) }, TT UCMOS01300KPA */ + /* { USB_DEVICE(0x0547, 0x6200) }, TT UCMOS02000KPA */ + /* { USB_DEVICE(0x0547, 0x6310) }, TT UCMOS03100KPA */ + /* { USB_DEVICE(0x0547, 0x6510) }, TT UCMOS05100KPA */ + /* { USB_DEVICE(0x0547, 0x6800) }, TT UCMOS08000KPA */ + /* { USB_DEVICE(0x0547, 0x6801) }, TT UCMOS08000KPB */ + { USB_DEVICE(0x0547, 0x6801) }, /* TT UCMOS08000KPB, AS MU800 */ + /* { USB_DEVICE(0x0547, 0x6900) }, TT UCMOS09000KPA */ + /* { USB_DEVICE(0x0547, 0x6901) }, TT UCMOS09000KPB */ + /* { USB_DEVICE(0x0547, 0x6010) }, TT UCMOS10000KPA */ + /* { USB_DEVICE(0x0547, 0x6014) }, TT UCMOS14000KPA */ + /* { USB_DEVICE(0x0547, 0x6131) }, TT UCMOS01300KMA */ + /* { USB_DEVICE(0x0547, 0x6511) }, TT UCMOS05100KMA */ + /* { USB_DEVICE(0x0547, 0x8080) }, TT UHCCD00800KPA */ + /* { USB_DEVICE(0x0547, 0x8140) }, TT UHCCD01400KPA */ + /* { USB_DEVICE(0x0547, 0x8141) }, TT EXCCD01400KPA */ + /* { USB_DEVICE(0x0547, 0x8200) }, TT UHCCD02000KPA */ + /* { USB_DEVICE(0x0547, 0x8201) }, TT UHCCD02000KPB */ + /* { USB_DEVICE(0x0547, 0x8310) }, TT UHCCD03100KPA */ + /* { USB_DEVICE(0x0547, 0x8500) }, TT UHCCD05000KPA */ + /* { USB_DEVICE(0x0547, 0x8510) }, TT UHCCD05100KPA */ + /* { USB_DEVICE(0x0547, 0x8600) }, TT UHCCD06000KPA */ + /* { USB_DEVICE(0x0547, 0x8800) }, TT UHCCD08000KPA */ + /* { USB_DEVICE(0x0547, 0x8315) }, TT UHCCD03150KPA */ + /* { USB_DEVICE(0x0547, 0x7800) }, TT UHCCD00800KMA */ + /* { USB_DEVICE(0x0547, 0x7140) }, TT UHCCD01400KMA */ + /* { USB_DEVICE(0x0547, 0x7141) }, TT UHCCD01400KMB */ + /* { USB_DEVICE(0x0547, 0x7200) }, TT UHCCD02000KMA */ + /* { USB_DEVICE(0x0547, 0x7315) }, TT UHCCD03150KMA */ + { } +}; +MODULE_DEVICE_TABLE(usb, device_table); + +static int sd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), + THIS_MODULE); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = device_table, + .probe = sd_probe, + .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif +}; + +static int __init sd_mod_init(void) +{ + int ret; + + ret = usb_register(&sd_driver); + if (ret < 0) + return ret; + return 0; +} +static void __exit sd_mod_exit(void) +{ + usb_deregister(&sd_driver); +} + +module_init(sd_mod_init); +module_exit(sd_mod_exit);