From: Michael Hennerich Date: Wed, 17 Aug 2011 15:29:34 +0000 (+0200) Subject: IIO: ADC: New driver for AD7190/AD7192/AD7195 4 Channel SPI ADC X-Git-Tag: MMI-PSA29.97-13-9~18234^2^2~864^2~205 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=7a27b042f9cf6bd6e60c236a55d7a71a64287a84;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git IIO: ADC: New driver for AD7190/AD7192/AD7195 4 Channel SPI ADC New driver for AD7190/AD7192/AD7195 4.8 kHz, Ultralow Noise, 24-Bit Sigma-Delta ADC with PGA These devices features a dual use data out ready DOUT/RDY output. In order to avoid contentions on the SPI bus, it's necessary to use spi bus locking. The DOUT/RDY output must also be wired to an interrupt capable GPIO. In INDIO_RING_TRIGGERED mode, this driver may block its SPI bus segment for an extended period of time. Changes since V1: Add missing documentation. Remove obsoleted include files. Fix typos and style issues. Fix buffer size. Split ad7192_show() into two functions. Avoid race condition add mutex. Abandon IIO_CHAN macro. Reorder elements in ad7192_platform_data. Remove driver bus type. Signed-off-by: Michael Hennerich Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio b/drivers/staging/iio/Documentation/sysfs-bus-iio index 5f99f88d1b2d..c19dbf4ab249 100644 --- a/drivers/staging/iio/Documentation/sysfs-bus-iio +++ b/drivers/staging/iio/Documentation/sysfs-bus-iio @@ -711,3 +711,24 @@ Contact: linux-iio@xxxxxxxxxxxxxxx Description: This attribute is used to read the amount of quadrature error present in the device at a given time. + +What: /sys/.../iio:deviceX/ac_excitation_en +KernelVersion: 3.1.0 +Contact: linux-iio@vger.kernel.org +Description: + This attribute, if available, is used to enable the AC + excitation mode found on some converters. In ac excitation mode, + the polarity of the excitation voltage is reversed on + alternate cycles, to eliminate DC errors. + +What: /sys/.../iio:deviceX/bridge_switch_en +KernelVersion: 3.1.0 +Contact: linux-iio@vger.kernel.org +Description: + This attribute, if available, is used to close or open the + bridge power down switch found on some converters. + In bridge applications, such as strain gauges and load cells, + the bridge itself consumes the majority of the current in the + system. To minimize the current consumption of the system, + the bridge can be disconnected (when it is not being used + using the bridge_switch_en attribute. diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index 60de7d72bb21..25566c624671 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -161,6 +161,20 @@ config AD7816 Say yes here to build support for Analog Devices AD7816/7/8 temperature sensors and ADC. +config AD7192 + tristate "Analog Devices AD7190 AD7192 AD7195 ADC driver" + depends on SPI + select IIO_RING_BUFFER + select IIO_SW_RING + select IIO_TRIGGER + help + Say yes here to build support for Analog Devices AD7190, + AD7192 or AD7195 SPI analog to digital convertors (ADC). + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad7192. + config ADT75 tristate "Analog Devices ADT75 temperature sensor driver" depends on I2C diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile index 634a55f54a74..990d3fada305 100644 --- a/drivers/staging/iio/adc/Makefile +++ b/drivers/staging/iio/adc/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_AD7745) += ad7745.o obj-$(CONFIG_AD7780) += ad7780.o obj-$(CONFIG_AD7793) += ad7793.o obj-$(CONFIG_AD7816) += ad7816.o +obj-$(CONFIG_AD7192) += ad7192.o obj-$(CONFIG_ADT75) += adt75.o obj-$(CONFIG_ADT7310) += adt7310.o obj-$(CONFIG_ADT7410) += adt7410.o diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c new file mode 100644 index 000000000000..c5a8b50ddf4d --- /dev/null +++ b/drivers/staging/iio/adc/ad7192.c @@ -0,0 +1,1189 @@ +/* + * AD7190 AD7192 AD7195 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../iio.h" +#include "../sysfs.h" +#include "../ring_generic.h" +#include "../ring_sw.h" +#include "../trigger.h" + +#include "ad7192.h" + +/* Registers */ +#define AD7192_REG_COMM 0 /* Communications Register (WO, 8-bit) */ +#define AD7192_REG_STAT 0 /* Status Register (RO, 8-bit) */ +#define AD7192_REG_MODE 1 /* Mode Register (RW, 24-bit */ +#define AD7192_REG_CONF 2 /* Configuration Register (RW, 24-bit) */ +#define AD7192_REG_DATA 3 /* Data Register (RO, 24/32-bit) */ +#define AD7192_REG_ID 4 /* ID Register (RO, 8-bit) */ +#define AD7192_REG_GPOCON 5 /* GPOCON Register (RO, 8-bit) */ +#define AD7192_REG_OFFSET 6 /* Offset Register (RW, 16-bit + * (AD7792)/24-bit (AD7192)) */ +#define AD7192_REG_FULLSALE 7 /* Full-Scale Register + * (RW, 16-bit (AD7792)/24-bit (AD7192)) */ + +/* Communications Register Bit Designations (AD7192_REG_COMM) */ +#define AD7192_COMM_WEN (1 << 7) /* Write Enable */ +#define AD7192_COMM_WRITE (0 << 6) /* Write Operation */ +#define AD7192_COMM_READ (1 << 6) /* Read Operation */ +#define AD7192_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */ +#define AD7192_COMM_CREAD (1 << 2) /* Continuous Read of Data Register */ + +/* Status Register Bit Designations (AD7192_REG_STAT) */ +#define AD7192_STAT_RDY (1 << 7) /* Ready */ +#define AD7192_STAT_ERR (1 << 6) /* Error (Overrange, Underrange) */ +#define AD7192_STAT_NOREF (1 << 5) /* Error no external reference */ +#define AD7192_STAT_PARITY (1 << 4) /* Parity */ +#define AD7192_STAT_CH3 (1 << 2) /* Channel 3 */ +#define AD7192_STAT_CH2 (1 << 1) /* Channel 2 */ +#define AD7192_STAT_CH1 (1 << 0) /* Channel 1 */ + +/* Mode Register Bit Designations (AD7192_REG_MODE) */ +#define AD7192_MODE_SEL(x) (((x) & 0x7) << 21) /* Operation Mode Select */ +#define AD7192_MODE_DAT_STA (1 << 20) /* Status Register transmission */ +#define AD7192_MODE_CLKSRC(x) (((x) & 0x3) << 18) /* Clock Source Select */ +#define AD7192_MODE_SINC3 (1 << 15) /* SINC3 Filter Select */ +#define AD7192_MODE_ACX (1 << 14) /* AC excitation enable(AD7195 only)*/ +#define AD7192_MODE_ENPAR (1 << 13) /* Parity Enable */ +#define AD7192_MODE_CLKDIV (1 << 12) /* Clock divide by 2 (AD7190/2 only)*/ +#define AD7192_MODE_SCYCLE (1 << 11) /* Single cycle conversion */ +#define AD7192_MODE_REJ60 (1 << 10) /* 50/60Hz notch filter */ +#define AD7192_MODE_RATE(x) ((x) & 0x3FF) /* Filter Update Rate Select */ + +/* Mode Register: AD7192_MODE_SEL options */ +#define AD7192_MODE_CONT 0 /* Continuous Conversion Mode */ +#define AD7192_MODE_SINGLE 1 /* Single Conversion Mode */ +#define AD7192_MODE_IDLE 2 /* Idle Mode */ +#define AD7192_MODE_PWRDN 3 /* Power-Down Mode */ +#define AD7192_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */ +#define AD7192_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */ +#define AD7192_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */ +#define AD7192_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */ + +/* Mode Register: AD7192_MODE_CLKSRC options */ +#define AD7192_CLK_EXT_MCLK1_2 0 /* External 4.92 MHz Clock connected + * from MCLK1 to MCLK2 */ +#define AD7192_CLK_EXT_MCLK2 1 /* External Clock applied to MCLK2 */ +#define AD7192_CLK_INT 2 /* Internal 4.92 MHz Clock not + * available at the MCLK2 pin */ +#define AD7192_CLK_INT_CO 3 /* Internal 4.92 MHz Clock available + * at the MCLK2 pin */ + + +/* Configuration Register Bit Designations (AD7192_REG_CONF) */ + +#define AD7192_CONF_CHOP (1 << 23) /* CHOP enable */ +#define AD7192_CONF_REFSEL (1 << 20) /* REFIN1/REFIN2 Reference Select */ +#define AD7192_CONF_CHAN(x) (((x) & 0xFF) << 8) /* Channel select */ +#define AD7192_CONF_BURN (1 << 7) /* Burnout current enable */ +#define AD7192_CONF_REFDET (1 << 6) /* Reference detect enable */ +#define AD7192_CONF_BUF (1 << 4) /* Buffered Mode Enable */ +#define AD7192_CONF_UNIPOLAR (1 << 3) /* Unipolar/Bipolar Enable */ +#define AD7192_CONF_GAIN(x) ((x) & 0x7) /* Gain Select */ + +#define AD7192_CH_AIN1P_AIN2M 0 /* AIN1(+) - AIN2(-) */ +#define AD7192_CH_AIN3P_AIN4M 1 /* AIN3(+) - AIN4(-) */ +#define AD7192_CH_TEMP 2 /* Temp Sensor */ +#define AD7192_CH_AIN2P_AIN2M 3 /* AIN2(+) - AIN2(-) */ +#define AD7192_CH_AIN1 4 /* AIN1 - AINCOM */ +#define AD7192_CH_AIN2 5 /* AIN2 - AINCOM */ +#define AD7192_CH_AIN3 6 /* AIN3 - AINCOM */ +#define AD7192_CH_AIN4 7 /* AIN4 - AINCOM */ + +/* ID Register Bit Designations (AD7192_REG_ID) */ +#define ID_AD7190 0x4 +#define ID_AD7192 0x0 +#define ID_AD7195 0x6 +#define AD7192_ID_MASK 0x0F + +/* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */ +#define AD7192_GPOCON_BPDSW (1 << 6) /* Bridge power-down switch enable */ +#define AD7192_GPOCON_GP32EN (1 << 5) /* Digital Output P3 and P2 enable */ +#define AD7192_GPOCON_GP10EN (1 << 4) /* Digital Output P1 and P0 enable */ +#define AD7192_GPOCON_P3DAT (1 << 3) /* P3 state */ +#define AD7192_GPOCON_P2DAT (1 << 2) /* P2 state */ +#define AD7192_GPOCON_P1DAT (1 << 1) /* P1 state */ +#define AD7192_GPOCON_P0DAT (1 << 0) /* P0 state */ + +#define AD7192_INT_FREQ_MHz 4915200 + +/* NOTE: + * The AD7190/2/5 features a dual use data out ready DOUT/RDY output. + * In order to avoid contentions on the SPI bus, it's therefore necessary + * to use spi bus locking. + * + * The DOUT/RDY output must also be wired to an interrupt capable GPIO. + */ + +struct ad7192_state { + struct spi_device *spi; + struct iio_trigger *trig; + struct regulator *reg; + struct ad7192_platform_data *pdata; + wait_queue_head_t wq_data_avail; + bool done; + bool irq_dis; + u16 int_vref_mv; + u32 mclk; + u32 f_order; + u32 mode; + u32 conf; + u32 scale_avail[8][2]; + u32 available_scan_masks[9]; + u8 gpocon; + u8 devid; + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + u8 data[4] ____cacheline_aligned; +}; + +static int __ad7192_write_reg(struct ad7192_state *st, bool locked, + bool cs_change, unsigned char reg, + unsigned size, unsigned val) +{ + u8 *data = st->data; + struct spi_transfer t = { + .tx_buf = data, + .len = size + 1, + .cs_change = cs_change, + }; + struct spi_message m; + + data[0] = AD7192_COMM_WRITE | AD7192_COMM_ADDR(reg); + + switch (size) { + case 3: + data[1] = val >> 16; + data[2] = val >> 8; + data[3] = val; + break; + case 2: + data[1] = val >> 8; + data[2] = val; + break; + case 1: + data[1] = val; + break; + default: + return -EINVAL; + } + + spi_message_init(&m); + spi_message_add_tail(&t, &m); + + if (locked) + return spi_sync_locked(st->spi, &m); + else + return spi_sync(st->spi, &m); +} + +static int ad7192_write_reg(struct ad7192_state *st, + unsigned reg, unsigned size, unsigned val) +{ + return __ad7192_write_reg(st, false, false, reg, size, val); +} + +static int __ad7192_read_reg(struct ad7192_state *st, bool locked, + bool cs_change, unsigned char reg, + int *val, unsigned size) +{ + u8 *data = st->data; + int ret; + struct spi_transfer t[] = { + { + .tx_buf = data, + .len = 1, + }, { + .rx_buf = data, + .len = size, + .cs_change = cs_change, + }, + }; + struct spi_message m; + + data[0] = AD7192_COMM_READ | AD7192_COMM_ADDR(reg); + + spi_message_init(&m); + spi_message_add_tail(&t[0], &m); + spi_message_add_tail(&t[1], &m); + + if (locked) + ret = spi_sync_locked(st->spi, &m); + else + ret = spi_sync(st->spi, &m); + + if (ret < 0) + return ret; + + switch (size) { + case 3: + *val = data[0] << 16 | data[1] << 8 | data[2]; + break; + case 2: + *val = data[0] << 8 | data[1]; + break; + case 1: + *val = data[0]; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int ad7192_read_reg(struct ad7192_state *st, + unsigned reg, int *val, unsigned size) +{ + return __ad7192_read_reg(st, 0, 0, reg, val, size); +} + +static int ad7192_read(struct ad7192_state *st, unsigned ch, + unsigned len, int *val) +{ + int ret; + st->conf = (st->conf & ~AD7192_CONF_CHAN(-1)) | + AD7192_CONF_CHAN(1 << ch); + st->mode = (st->mode & ~AD7192_MODE_SEL(-1)) | + AD7192_MODE_SEL(AD7192_MODE_SINGLE); + + ad7192_write_reg(st, AD7192_REG_CONF, 3, st->conf); + + spi_bus_lock(st->spi->master); + st->done = false; + + ret = __ad7192_write_reg(st, 1, 1, AD7192_REG_MODE, 3, st->mode); + if (ret < 0) + goto out; + + st->irq_dis = false; + enable_irq(st->spi->irq); + wait_event_interruptible(st->wq_data_avail, st->done); + + ret = __ad7192_read_reg(st, 1, 0, AD7192_REG_DATA, val, len); +out: + spi_bus_unlock(st->spi->master); + + return ret; +} + +static int ad7192_calibrate(struct ad7192_state *st, unsigned mode, unsigned ch) +{ + int ret; + + st->conf = (st->conf & ~AD7192_CONF_CHAN(-1)) | + AD7192_CONF_CHAN(1 << ch); + st->mode = (st->mode & ~AD7192_MODE_SEL(-1)) | AD7192_MODE_SEL(mode); + + ad7192_write_reg(st, AD7192_REG_CONF, 3, st->conf); + + spi_bus_lock(st->spi->master); + st->done = false; + + ret = __ad7192_write_reg(st, 1, 1, AD7192_REG_MODE, 3, + (st->devid != ID_AD7195) ? + st->mode | AD7192_MODE_CLKDIV : + st->mode); + if (ret < 0) + goto out; + + st->irq_dis = false; + enable_irq(st->spi->irq); + wait_event_interruptible(st->wq_data_avail, st->done); + + st->mode = (st->mode & ~AD7192_MODE_SEL(-1)) | + AD7192_MODE_SEL(AD7192_MODE_IDLE); + + ret = __ad7192_write_reg(st, 1, 0, AD7192_REG_MODE, 3, st->mode); +out: + spi_bus_unlock(st->spi->master); + + return ret; +} + +static const u8 ad7192_calib_arr[8][2] = { + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN1}, + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN1}, + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN2}, + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN2}, + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN3}, + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN3}, + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN4}, + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN4} +}; + +static int ad7192_calibrate_all(struct ad7192_state *st) +{ + int i, ret; + + for (i = 0; i < ARRAY_SIZE(ad7192_calib_arr); i++) { + ret = ad7192_calibrate(st, ad7192_calib_arr[i][0], + ad7192_calib_arr[i][1]); + if (ret) + goto out; + } + + return 0; +out: + dev_err(&st->spi->dev, "Calibration failed\n"); + return ret; +} + +static int ad7192_setup(struct ad7192_state *st) +{ + struct iio_dev *indio_dev = spi_get_drvdata(st->spi); + struct ad7192_platform_data *pdata = st->pdata; + unsigned long long scale_uv; + int i, ret, id; + u8 ones[6]; + + /* reset the serial interface */ + memset(&ones, 0xFF, 6); + ret = spi_write(st->spi, &ones, 6); + if (ret < 0) + goto out; + msleep(1); /* Wait for at least 500us */ + + /* write/read test for device presence */ + ret = ad7192_read_reg(st, AD7192_REG_ID, &id, 1); + if (ret) + goto out; + + id &= AD7192_ID_MASK; + + if (id != st->devid) + dev_warn(&st->spi->dev, "device ID query failed (0x%X)\n", id); + + switch (pdata->clock_source_sel) { + case AD7192_CLK_EXT_MCLK1_2: + case AD7192_CLK_EXT_MCLK2: + st->mclk = AD7192_INT_FREQ_MHz; + break; + case AD7192_CLK_INT: + case AD7192_CLK_INT_CO: + if (pdata->ext_clk_Hz) + st->mclk = pdata->ext_clk_Hz; + else + st->mclk = AD7192_INT_FREQ_MHz; + break; + default: + ret = -EINVAL; + goto out; + } + + st->mode = AD7192_MODE_SEL(AD7192_MODE_IDLE) | + AD7192_MODE_CLKSRC(pdata->clock_source_sel) | + AD7192_MODE_RATE(480); + + st->conf = AD7192_CONF_GAIN(0); + + if (pdata->rej60_en) + st->mode |= AD7192_MODE_REJ60; + + if (pdata->sinc3_en) + st->mode |= AD7192_MODE_SINC3; + + if (pdata->refin2_en && (st->devid != ID_AD7195)) + st->conf |= AD7192_CONF_REFSEL; + + if (pdata->chop_en) { + st->conf |= AD7192_CONF_CHOP; + if (pdata->sinc3_en) + st->f_order = 3; /* SINC 3rd order */ + else + st->f_order = 4; /* SINC 4th order */ + } else { + st->f_order = 1; + } + + if (pdata->buf_en) + st->conf |= AD7192_CONF_BUF; + + if (pdata->unipolar_en) + st->conf |= AD7192_CONF_UNIPOLAR; + + if (pdata->burnout_curr_en) + st->conf |= AD7192_CONF_BURN; + + ret = ad7192_write_reg(st, AD7192_REG_MODE, 3, st->mode); + if (ret) + goto out; + + ret = ad7192_write_reg(st, AD7192_REG_CONF, 3, st->conf); + if (ret) + goto out; + + ret = ad7192_calibrate_all(st); + if (ret) + goto out; + + /* Populate available ADC input ranges */ + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) { + scale_uv = ((u64)st->int_vref_mv * 100000000) + >> (indio_dev->channels[0].scan_type.realbits - + ((st->conf & AD7192_CONF_UNIPOLAR) ? 0 : 1)); + scale_uv >>= i; + + st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10; + st->scale_avail[i][0] = scale_uv; + } + + return 0; +out: + dev_err(&st->spi->dev, "setup failed\n"); + return ret; +} + +static int ad7192_scan_from_ring(struct ad7192_state *st, unsigned ch, int *val) +{ + struct iio_ring_buffer *ring = iio_priv_to_dev(st)->ring; + int ret; + s64 dat64[2]; + u32 *dat32 = (u32 *)dat64; + + if (!(ring->scan_mask & (1 << ch))) + return -EBUSY; + + ret = ring->access->read_last(ring, (u8 *) &dat64); + if (ret) + return ret; + + *val = *dat32; + + return 0; +} + +static int ad7192_ring_preenable(struct iio_dev *indio_dev) +{ + struct ad7192_state *st = iio_priv(indio_dev); + struct iio_ring_buffer *ring = indio_dev->ring; + size_t d_size; + unsigned channel; + + if (!ring->scan_count) + return -EINVAL; + + channel = __ffs(ring->scan_mask); + + d_size = ring->scan_count * + indio_dev->channels[0].scan_type.storagebits / 8; + + if (ring->scan_timestamp) { + d_size += sizeof(s64); + + if (d_size % sizeof(s64)) + d_size += sizeof(s64) - (d_size % sizeof(s64)); + } + + if (indio_dev->ring->access->set_bytes_per_datum) + indio_dev->ring->access->set_bytes_per_datum(indio_dev->ring, + d_size); + + st->mode = (st->mode & ~AD7192_MODE_SEL(-1)) | + AD7192_MODE_SEL(AD7192_MODE_CONT); + st->conf = (st->conf & ~AD7192_CONF_CHAN(-1)) | + AD7192_CONF_CHAN(1 << indio_dev->channels[channel].address); + + ad7192_write_reg(st, AD7192_REG_CONF, 3, st->conf); + + spi_bus_lock(st->spi->master); + __ad7192_write_reg(st, 1, 1, AD7192_REG_MODE, 3, st->mode); + + st->irq_dis = false; + enable_irq(st->spi->irq); + + return 0; +} + +static int ad7192_ring_postdisable(struct iio_dev *indio_dev) +{ + struct ad7192_state *st = iio_priv(indio_dev); + + st->mode = (st->mode & ~AD7192_MODE_SEL(-1)) | + AD7192_MODE_SEL(AD7192_MODE_IDLE); + + st->done = false; + wait_event_interruptible(st->wq_data_avail, st->done); + + if (!st->irq_dis) + disable_irq_nosync(st->spi->irq); + + __ad7192_write_reg(st, 1, 0, AD7192_REG_MODE, 3, st->mode); + + return spi_bus_unlock(st->spi->master); +} + +/** + * ad7192_trigger_handler() bh of trigger launched polling to ring buffer + **/ +static irqreturn_t ad7192_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->private_data; + struct iio_ring_buffer *ring = indio_dev->ring; + struct ad7192_state *st = iio_priv(indio_dev); + s64 dat64[2]; + s32 *dat32 = (s32 *)dat64; + + if (ring->scan_count) + __ad7192_read_reg(st, 1, 1, AD7192_REG_DATA, + dat32, + indio_dev->channels[0].scan_type.realbits/8); + + /* Guaranteed to be aligned with 8 byte boundary */ + if (ring->scan_timestamp) + dat64[1] = pf->timestamp; + + ring->access->store_to(ring, (u8 *)dat64, pf->timestamp); + + iio_trigger_notify_done(indio_dev->trig); + st->irq_dis = false; + enable_irq(st->spi->irq); + + return IRQ_HANDLED; +} + +static const struct iio_ring_setup_ops ad7192_ring_setup_ops = { + .preenable = &ad7192_ring_preenable, + .postenable = &iio_triggered_ring_postenable, + .predisable = &iio_triggered_ring_predisable, + .postdisable = &ad7192_ring_postdisable, +}; + +static int ad7192_register_ring_funcs_and_init(struct iio_dev *indio_dev) +{ + int ret; + + indio_dev->ring = iio_sw_rb_allocate(indio_dev); + if (!indio_dev->ring) { + ret = -ENOMEM; + goto error_ret; + } + /* Effectively select the ring buffer implementation */ + indio_dev->ring->access = &ring_sw_access_funcs; + indio_dev->pollfunc = iio_alloc_pollfunc(&iio_pollfunc_store_time, + &ad7192_trigger_handler, + IRQF_ONESHOT, + indio_dev, + "ad7192_consumer%d", + indio_dev->id); + if (indio_dev->pollfunc == NULL) { + ret = -ENOMEM; + goto error_deallocate_sw_rb; + } + + /* Ring buffer functions - here trigger setup related */ + indio_dev->ring->setup_ops = &ad7192_ring_setup_ops; + + /* Flag that polled ring buffering is possible */ + indio_dev->modes |= INDIO_RING_TRIGGERED; + return 0; + +error_deallocate_sw_rb: + iio_sw_rb_free(indio_dev->ring); +error_ret: + return ret; +} + +static void ad7192_ring_cleanup(struct iio_dev *indio_dev) +{ + /* ensure that the trigger has been detached */ + if (indio_dev->trig) { + iio_put_trigger(indio_dev->trig); + iio_trigger_dettach_poll_func(indio_dev->trig, + indio_dev->pollfunc); + } + iio_dealloc_pollfunc(indio_dev->pollfunc); + iio_sw_rb_free(indio_dev->ring); +} + +/** + * ad7192_data_rdy_trig_poll() the event handler for the data rdy trig + **/ +static irqreturn_t ad7192_data_rdy_trig_poll(int irq, void *private) +{ + struct ad7192_state *st = iio_priv(private); + + st->done = true; + wake_up_interruptible(&st->wq_data_avail); + disable_irq_nosync(irq); + st->irq_dis = true; + iio_trigger_poll(st->trig, iio_get_time_ns()); + + return IRQ_HANDLED; +} + +static int ad7192_probe_trigger(struct iio_dev *indio_dev) +{ + struct ad7192_state *st = iio_priv(indio_dev); + int ret; + + st->trig = iio_allocate_trigger("%s-dev%d", + spi_get_device_id(st->spi)->name, + indio_dev->id); + if (st->trig == NULL) { + ret = -ENOMEM; + goto error_ret; + } + + ret = request_irq(st->spi->irq, + ad7192_data_rdy_trig_poll, + IRQF_TRIGGER_LOW, + spi_get_device_id(st->spi)->name, + indio_dev); + if (ret) + goto error_free_trig; + + disable_irq_nosync(st->spi->irq); + st->irq_dis = true; + st->trig->dev.parent = &st->spi->dev; + st->trig->owner = THIS_MODULE; + st->trig->private_data = indio_dev; + + ret = iio_trigger_register(st->trig); + + /* select default trigger */ + indio_dev->trig = st->trig; + if (ret) + goto error_free_irq; + + return 0; + +error_free_irq: + free_irq(st->spi->irq, indio_dev); +error_free_trig: + iio_free_trigger(st->trig); +error_ret: + return ret; +} + +static void ad7192_remove_trigger(struct iio_dev *indio_dev) +{ + struct ad7192_state *st = iio_priv(indio_dev); + + iio_trigger_unregister(st->trig); + free_irq(st->spi->irq, indio_dev); + iio_free_trigger(st->trig); +} + +static ssize_t ad7192_read_frequency(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7192_state *st = iio_priv(indio_dev); + + return sprintf(buf, "%d\n", st->mclk / + (st->f_order * 1024 * AD7192_MODE_RATE(st->mode))); +} + +static ssize_t ad7192_write_frequency(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t len) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7192_state *st = iio_priv(indio_dev); + unsigned long lval; + int div, ret; + + ret = strict_strtoul(buf, 10, &lval); + if (ret) + return ret; + + mutex_lock(&indio_dev->mlock); + if (iio_ring_enabled(indio_dev)) { + mutex_unlock(&indio_dev->mlock); + return -EBUSY; + } + + div = st->mclk / (lval * st->f_order * 1024); + if (div < 1 || div > 1023) { + ret = -EINVAL; + goto out; + } + + st->mode &= ~AD7192_MODE_RATE(-1); + st->mode |= AD7192_MODE_RATE(div); + ad7192_write_reg(st, AD7192_REG_MODE, 3, st->mode); + +out: + mutex_unlock(&indio_dev->mlock); + + return ret ? ret : len; +} + +static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, + ad7192_read_frequency, + ad7192_write_frequency); + + +static ssize_t ad7192_show_scale_available(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7192_state *st = iio_priv(indio_dev); + int i, len = 0; + + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) + len += sprintf(buf + len, "%d.%09u ", st->scale_avail[i][0], + st->scale_avail[i][1]); + + len += sprintf(buf + len, "\n"); + + return len; +} + +static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available, in-in_scale_available, + S_IRUGO, ad7192_show_scale_available, NULL, 0); + +static IIO_DEVICE_ATTR(in_scale_available, S_IRUGO, + ad7192_show_scale_available, NULL, 0); + +static ssize_t ad7192_show_ac_excitation(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7192_state *st = iio_priv(indio_dev); + + return sprintf(buf, "%d\n", !!(st->mode & AD7192_MODE_ACX)); +} + +static ssize_t ad7192_show_bridge_switch(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7192_state *st = iio_priv(indio_dev); + + return sprintf(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW)); +} + +static ssize_t ad7192_set(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t len) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7192_state *st = iio_priv(indio_dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + int ret; + bool val; + + ret = strtobool(buf, &val); + if (ret < 0) + return ret; + + mutex_lock(&indio_dev->mlock); + if (iio_ring_enabled(indio_dev)) { + mutex_unlock(&indio_dev->mlock); + return -EBUSY; + } + + switch (this_attr->address) { + case AD7192_REG_GPOCON: + if (val) + st->gpocon |= AD7192_GPOCON_BPDSW; + else + st->gpocon &= ~AD7192_GPOCON_BPDSW; + + ad7192_write_reg(st, AD7192_REG_GPOCON, 1, st->gpocon); + break; + case AD7192_REG_MODE: + if (val) + st->mode |= AD7192_MODE_ACX; + else + st->mode &= ~AD7192_MODE_ACX; + + ad7192_write_reg(st, AD7192_REG_GPOCON, 3, st->mode); + break; + default: + ret = -EINVAL; + } + + mutex_unlock(&indio_dev->mlock); + + return ret ? ret : len; +} + +static IIO_DEVICE_ATTR(bridge_switch_en, S_IRUGO | S_IWUSR, + ad7192_show_bridge_switch, ad7192_set, + AD7192_REG_GPOCON); + +static IIO_DEVICE_ATTR(ac_excitation_en, S_IRUGO | S_IWUSR, + ad7192_show_ac_excitation, ad7192_set, + AD7192_REG_MODE); + +static struct attribute *ad7192_attributes[] = { + &iio_dev_attr_sampling_frequency.dev_attr.attr, + &iio_dev_attr_in_m_in_scale_available.dev_attr.attr, + &iio_dev_attr_in_scale_available.dev_attr.attr, + &iio_dev_attr_bridge_switch_en.dev_attr.attr, + &iio_dev_attr_ac_excitation_en.dev_attr.attr, + NULL +}; + +static mode_t ad7192_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct iio_dev *dev_info = dev_get_drvdata(dev); + struct ad7192_state *st = iio_priv(dev_info); + + mode_t mode = attr->mode; + + if ((st->devid != ID_AD7195) && + (attr == &iio_dev_attr_ac_excitation_en.dev_attr.attr)) + mode = 0; + + return mode; +} + +static const struct attribute_group ad7192_attribute_group = { + .attrs = ad7192_attributes, + .is_visible = ad7192_attr_is_visible, +}; + +static int ad7192_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long m) +{ + struct ad7192_state *st = iio_priv(indio_dev); + int ret, smpl = 0; + bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR); + + switch (m) { + case 0: + mutex_lock(&indio_dev->mlock); + if (iio_ring_enabled(indio_dev)) + ret = ad7192_scan_from_ring(st, + chan->scan_index, &smpl); + else + ret = ad7192_read(st, chan->address, + chan->scan_type.realbits / 8, &smpl); + mutex_unlock(&indio_dev->mlock); + + if (ret < 0) + return ret; + + *val = (smpl >> chan->scan_type.shift) & + ((1 << (chan->scan_type.realbits)) - 1); + + switch (chan->type) { + case IIO_IN: + case IIO_IN_DIFF: + if (!unipolar) + *val -= (1 << (chan->scan_type.realbits - 1)); + break; + case IIO_TEMP: + *val -= 0x800000; + *val /= 2815; /* temp Kelvin */ + *val -= 273; /* temp Celsius */ + break; + default: + return -EINVAL; + } + return IIO_VAL_INT; + + case (1 << IIO_CHAN_INFO_SCALE_SHARED): + mutex_lock(&indio_dev->mlock); + *val = st->scale_avail[AD7192_CONF_GAIN(st->conf)][0]; + *val2 = st->scale_avail[AD7192_CONF_GAIN(st->conf)][1]; + mutex_unlock(&indio_dev->mlock); + + return IIO_VAL_INT_PLUS_NANO; + + case (1 << IIO_CHAN_INFO_SCALE_SEPARATE): + *val = 1000; + + return IIO_VAL_INT; + } + + return -EINVAL; +} + +static int ad7192_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct ad7192_state *st = iio_priv(indio_dev); + int ret, i; + unsigned int tmp; + + mutex_lock(&indio_dev->mlock); + if (iio_ring_enabled(indio_dev)) { + mutex_unlock(&indio_dev->mlock); + return -EBUSY; + } + + switch (mask) { + case (1 << IIO_CHAN_INFO_SCALE_SHARED): + ret = -EINVAL; + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) + if (val2 == st->scale_avail[i][1]) { + tmp = st->conf; + st->conf &= ~AD7192_CONF_GAIN(-1); + st->conf |= AD7192_CONF_GAIN(i); + + if (tmp != st->conf) { + ad7192_write_reg(st, AD7192_REG_CONF, + 3, st->conf); + ad7192_calibrate_all(st); + } + ret = 0; + } + + default: + ret = -EINVAL; + } + + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static int ad7192_validate_trigger(struct iio_dev *indio_dev, + struct iio_trigger *trig) +{ + if (indio_dev->trig != trig) + return -EINVAL; + + return 0; +} + +static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + return IIO_VAL_INT_PLUS_NANO; +} + +static const struct iio_info ad7192_info = { + .read_raw = &ad7192_read_raw, + .write_raw = &ad7192_write_raw, + .write_raw_get_fmt = &ad7192_write_raw_get_fmt, + .attrs = &ad7192_attribute_group, + .validate_trigger = ad7192_validate_trigger, + .driver_module = THIS_MODULE, +}; + +#define AD7192_CHAN_DIFF(_chan, _chan2, _name, _address, _si) \ + { .type = IIO_IN_DIFF, \ + .indexed = 1, \ + .extend_name = _name, \ + .channel = _chan, \ + .channel2 = _chan2, \ + .info_mask = (1 << IIO_CHAN_INFO_SCALE_SHARED), \ + .address = _address, \ + .scan_index = _si, \ + .scan_type = IIO_ST('s', 24, 32, 0)} + +#define AD7192_CHAN(_chan, _address, _si) \ + { .type = IIO_IN, \ + .indexed = 1, \ + .channel = _chan, \ + .info_mask = (1 << IIO_CHAN_INFO_SCALE_SHARED), \ + .address = _address, \ + .scan_index = _si, \ + .scan_type = IIO_ST('s', 24, 32, 0)} + +#define AD7192_CHAN_TEMP(_chan, _address, _si) \ + { .type = IIO_TEMP, \ + .indexed = 1, \ + .channel = _chan, \ + .info_mask = (1 << IIO_CHAN_INFO_SCALE_SEPARATE), \ + .address = _address, \ + .scan_index = _si, \ + .scan_type = IIO_ST('s', 24, 32, 0)} + +static struct iio_chan_spec ad7192_channels[] = { + AD7192_CHAN_DIFF(1, 2, NULL, AD7192_CH_AIN1P_AIN2M, 0), + AD7192_CHAN_DIFF(3, 4, NULL, AD7192_CH_AIN3P_AIN4M, 1), + AD7192_CHAN_TEMP(0, AD7192_CH_TEMP, 2), + AD7192_CHAN_DIFF(2, 2, "shorted", AD7192_CH_AIN2P_AIN2M, 3), + AD7192_CHAN(1, AD7192_CH_AIN1, 4), + AD7192_CHAN(2, AD7192_CH_AIN2, 5), + AD7192_CHAN(3, AD7192_CH_AIN3, 6), + AD7192_CHAN(4, AD7192_CH_AIN4, 7), + IIO_CHAN_SOFT_TIMESTAMP(8), +}; + +static int __devinit ad7192_probe(struct spi_device *spi) +{ + struct ad7192_platform_data *pdata = spi->dev.platform_data; + struct ad7192_state *st; + struct iio_dev *indio_dev; + int ret, i , voltage_uv = 0, regdone = 0; + + if (!pdata) { + dev_err(&spi->dev, "no platform data?\n"); + return -ENODEV; + } + + if (!spi->irq) { + dev_err(&spi->dev, "no IRQ?\n"); + return -ENODEV; + } + + indio_dev = iio_allocate_device(sizeof(*st)); + if (indio_dev == NULL) + return -ENOMEM; + + st = iio_priv(indio_dev); + + st->reg = regulator_get(&spi->dev, "vcc"); + if (!IS_ERR(st->reg)) { + ret = regulator_enable(st->reg); + if (ret) + goto error_put_reg; + + voltage_uv = regulator_get_voltage(st->reg); + } + + st->pdata = pdata; + + if (pdata && pdata->vref_mv) + st->int_vref_mv = pdata->vref_mv; + else if (voltage_uv) + st->int_vref_mv = voltage_uv / 1000; + else + dev_warn(&spi->dev, "reference voltage undefined\n"); + + spi_set_drvdata(spi, indio_dev); + st->spi = spi; + st->devid = spi_get_device_id(spi)->driver_data; + indio_dev->dev.parent = &spi->dev; + indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = ad7192_channels; + indio_dev->num_channels = ARRAY_SIZE(ad7192_channels); + indio_dev->available_scan_masks = st->available_scan_masks; + indio_dev->info = &ad7192_info; + + for (i = 0; i < indio_dev->num_channels; i++) + st->available_scan_masks[i] = (1 << i) | (1 << + indio_dev->channels[indio_dev->num_channels - 1]. + scan_index); + + init_waitqueue_head(&st->wq_data_avail); + + ret = ad7192_register_ring_funcs_and_init(indio_dev); + if (ret) + goto error_disable_reg; + + ret = iio_device_register(indio_dev); + if (ret) + goto error_unreg_ring; + regdone = 1; + + ret = ad7192_probe_trigger(indio_dev); + if (ret) + goto error_unreg_ring; + + ret = iio_ring_buffer_register_ex(indio_dev->ring, 0, + indio_dev->channels, + indio_dev->num_channels); + if (ret) + goto error_remove_trigger; + + ret = ad7192_setup(st); + if (ret) + goto error_uninitialize_ring; + + return 0; + +error_uninitialize_ring: + iio_ring_buffer_unregister(indio_dev->ring); +error_remove_trigger: + ad7192_remove_trigger(indio_dev); +error_unreg_ring: + ad7192_ring_cleanup(indio_dev); +error_disable_reg: + if (!IS_ERR(st->reg)) + regulator_disable(st->reg); +error_put_reg: + if (!IS_ERR(st->reg)) + regulator_put(st->reg); + + if (regdone) + iio_device_unregister(indio_dev); + else + iio_free_device(indio_dev); + + return ret; +} + +static int ad7192_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct ad7192_state *st = iio_priv(indio_dev); + + iio_ring_buffer_unregister(indio_dev->ring); + ad7192_remove_trigger(indio_dev); + ad7192_ring_cleanup(indio_dev); + + if (!IS_ERR(st->reg)) { + regulator_disable(st->reg); + regulator_put(st->reg); + } + + iio_device_unregister(indio_dev); + + return 0; +} + +static const struct spi_device_id ad7192_id[] = { + {"ad7190", ID_AD7190}, + {"ad7192", ID_AD7192}, + {"ad7195", ID_AD7195}, + {} +}; + +static struct spi_driver ad7192_driver = { + .driver = { + .name = "ad7192", + .owner = THIS_MODULE, + }, + .probe = ad7192_probe, + .remove = __devexit_p(ad7192_remove), + .id_table = ad7192_id, +}; + +static int __init ad7192_init(void) +{ + return spi_register_driver(&ad7192_driver); +} +module_init(ad7192_init); + +static void __exit ad7192_exit(void) +{ + spi_unregister_driver(&ad7192_driver); +} +module_exit(ad7192_exit); + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("Analog Devices AD7190, AD7192, AD7195 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/adc/ad7192.h b/drivers/staging/iio/adc/ad7192.h new file mode 100644 index 000000000000..a0a5b61a41f1 --- /dev/null +++ b/drivers/staging/iio/adc/ad7192.h @@ -0,0 +1,47 @@ +/* + * AD7190 AD7192 AD7195 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ +#ifndef IIO_ADC_AD7192_H_ +#define IIO_ADC_AD7192_H_ + +/* + * TODO: struct ad7192_platform_data needs to go into include/linux/iio + */ + +/** + * struct ad7192_platform_data - platform/board specific information + * @vref_mv: the external reference voltage in millivolt + * @clock_source_sel: [0..3] + * 0 External 4.92 MHz clock connected from MCLK1 to MCLK2 + * 1 External Clock applied to MCLK2 + * 2 Internal 4.92 MHz Clock not available at the MCLK2 pin + * 3 Internal 4.92 MHz Clock available at the MCLK2 pin + * @ext_clk_Hz: the external clock frequency in Hz, if not set + * the driver uses the internal clock (16.776 MHz) + * @refin2_en: REFIN1/REFIN2 Reference Select (AD7190/2 only) + * @rej60_en: 50/60Hz notch filter enable + * @sinc3_en: SINC3 filter enable (default SINC4) + * @chop_en: CHOP mode enable + * @buf_en: buffered input mode enable + * @unipolar_en: unipolar mode enable + * @burnout_curr_en: constant current generators on AIN(+|-) enable + */ + +struct ad7192_platform_data { + u16 vref_mv; + u8 clock_source_sel; + u32 ext_clk_Hz; + bool refin2_en; + bool rej60_en; + bool sinc3_en; + bool chop_en; + bool buf_en; + bool unipolar_en; + bool burnout_curr_en; +}; + +#endif /* IIO_ADC_AD7192_H_ */