From: Peter P Waskiewicz Jr Date: Thu, 4 Jun 2009 16:02:24 +0000 (+0000) Subject: ixgbe: Add FW detection and warning for 82599 SFP+ adapters X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=794caeb259bc5d341bcc80dd37820073147a231c;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git ixgbe: Add FW detection and warning for 82599 SFP+ adapters 82599 has a FW running that helps manage the internal SFI PHY. There are also a number of pre-production samples of these SFI-based devices in the field. This patch adds a check to look for the firmware running on all SFP+ based adapters, and displays a warning to the system log if a pre-production adapter is identified. The driver will continue loading though, with no functional degradation. Also remove an old function prototype from ixgbe_82599.c that isn't being used. Signed-off-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 5c2627b68c2d..1984cab7d48b 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -71,10 +71,10 @@ s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw); s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw); s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val); s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val); -s32 ixgbe_start_hw_rev_0_82599(struct ixgbe_hw *hw); s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw); s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw); u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw); +static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) { @@ -2142,8 +2142,9 @@ s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw) { u32 q_num; + s32 ret_val; - ixgbe_start_hw_generic(hw); + ret_val = ixgbe_start_hw_generic(hw); /* Clear the rate limiters */ for (q_num = 0; q_num < hw->mac.max_tx_queues; q_num++) { @@ -2155,7 +2156,10 @@ s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw) /* We need to run link autotry after the driver loads */ hw->mac.autotry_restart = true; - return 0; + if (ret_val == 0) + ret_val = ixgbe_verify_fw_version_82599(hw); + + return ret_val; } /** @@ -2407,6 +2411,54 @@ san_mac_addr_out: return 0; } +/** + * ixgbe_verify_fw_version_82599 - verify fw version for 82599 + * @hw: pointer to hardware structure + * + * Verifies that installed the firmware version is 0.6 or higher + * for SFI devices. All 82599 SFI devices should have version 0.6 or higher. + * + * Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or + * if the FW version is not supported. + **/ +static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_EEPROM_VERSION; + u16 fw_offset, fw_ptp_cfg_offset; + u16 fw_version = 0; + + /* firmware check is only necessary for SFI devices */ + if (hw->phy.media_type != ixgbe_media_type_fiber) { + status = 0; + goto fw_version_out; + } + + /* get the offset to the Firmware Module block */ + hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); + + if ((fw_offset == 0) || (fw_offset == 0xFFFF)) + goto fw_version_out; + + /* get the offset to the Pass Through Patch Configuration block */ + hw->eeprom.ops.read(hw, (fw_offset + + IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR), + &fw_ptp_cfg_offset); + + if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF)) + goto fw_version_out; + + /* get the firmware version */ + hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset + + IXGBE_FW_PATCH_VERSION_4), + &fw_version); + + if (fw_version > 0x5) + status = 0; + +fw_version_out: + return status; +} + static struct ixgbe_mac_operations mac_ops_82599 = { .init_hw = &ixgbe_init_hw_generic, .reset_hw = &ixgbe_reset_hw_82599, diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index db339d6fe63d..96a185953777 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -106,13 +106,17 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) **/ s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw) { + s32 status; + /* Reset the hardware */ - hw->mac.ops.reset_hw(hw); + status = hw->mac.ops.reset_hw(hw); - /* Start the HW */ - hw->mac.ops.start_hw(hw); + if (status == 0) { + /* Start the HW */ + status = hw->mac.ops.start_hw(hw); + } - return 0; + return status; } /** diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index ca7c5d508752..543a606f22cc 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2728,6 +2728,15 @@ void ixgbe_reset(struct ixgbe_adapter *adapter) case IXGBE_ERR_MASTER_REQUESTS_PENDING: dev_err(&adapter->pdev->dev, "master disable timed out\n"); break; + case IXGBE_ERR_EEPROM_VERSION: + /* We are running on a pre-production device, log a warning */ + dev_warn(&adapter->pdev->dev, "This device is a pre-production " + "adapter/LOM. Please be aware there may be issues " + "associated with your hardware. If you are " + "experiencing problems please contact your Intel or " + "hardware representative who provided you with this " + "hardware.\n"); + break; default: dev_err(&adapter->pdev->dev, "Hardware Error: %d\n", err); } @@ -5608,8 +5617,17 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, hw->eeprom.ops.read(hw, 0x29, &adapter->eeprom_version); /* reset the hardware with the new settings */ - hw->mac.ops.start_hw(hw); + err = hw->mac.ops.start_hw(hw); + if (err == IXGBE_ERR_EEPROM_VERSION) { + /* We are running on a pre-production device, log a warning */ + dev_warn(&pdev->dev, "This device is a pre-production " + "adapter/LOM. Please be aware there may be issues " + "associated with your hardware. If you are " + "experiencing problems please contact your Intel or " + "hardware representative who provided you with this " + "hardware.\n"); + } strcpy(netdev->name, "eth%d"); err = register_netdev(netdev); if (err) diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 68cac3674f9a..fa87309dc087 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -1516,6 +1516,8 @@ #define IXGBE_SAN_MAC_ADDR_PORT1_OFFSET 0x3 #define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP 0x1 #define IXGBE_DEVICE_CAPS_FCOE_OFFLOADS 0x2 +#define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR 0x4 +#define IXGBE_FW_PATCH_VERSION_4 0x7 /* PCI Bus Info */ #define IXGBE_PCI_LINK_STATUS 0xB2 @@ -2495,6 +2497,7 @@ struct ixgbe_info { #define IXGBE_ERR_SFP_NOT_PRESENT -20 #define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT -21 #define IXGBE_ERR_FDIR_REINIT_FAILED -23 +#define IXGBE_ERR_EEPROM_VERSION -24 #define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF #endif /* _IXGBE_TYPE_H_ */