From: Joe Perches Date: Mon, 22 Feb 2010 16:56:58 +0000 (+0000) Subject: drivers/net/myri10ge: Use pr_ and netdev_ X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=78ca90ea995cb86c72cde9308276d2a701bd3c40;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git drivers/net/myri10ge: Use pr_ and netdev_ Add #define pr_fmt(fmt) Convert logging messages to pr_ and netdev_ Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index c0884a9cba3c..1d14a8b05fa0 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -38,6 +38,8 @@ * Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006 *************************************************************************/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -819,9 +821,7 @@ static int myri10ge_change_pause(struct myri10ge_priv *mgp, int pause) status = myri10ge_send_cmd(mgp, ctl, &cmd, 0); if (status) { - printk(KERN_ERR - "myri10ge: %s: Failed to set flow control mode\n", - mgp->dev->name); + netdev_err(mgp->dev, "Failed to set flow control mode\n"); return status; } mgp->pause = pause; @@ -837,8 +837,7 @@ myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic) ctl = promisc ? MXGEFW_ENABLE_PROMISC : MXGEFW_DISABLE_PROMISC; status = myri10ge_send_cmd(mgp, ctl, &cmd, atomic); if (status) - printk(KERN_ERR "myri10ge: %s: Failed to set promisc mode\n", - mgp->dev->name); + netdev_err(mgp->dev, "Failed to set promisc mode\n"); } static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type) @@ -1482,19 +1481,15 @@ static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp) if (mgp->link_state == MXGEFW_LINK_UP) { if (netif_msg_link(mgp)) - printk(KERN_INFO - "myri10ge: %s: link up\n", - mgp->dev->name); + netdev_info(mgp->dev, "link up\n"); netif_carrier_on(mgp->dev); mgp->link_changes++; } else { if (netif_msg_link(mgp)) - printk(KERN_INFO - "myri10ge: %s: link %s\n", - mgp->dev->name, - (link_up == MXGEFW_LINK_MYRINET ? - "mismatch (Myrinet detected)" : - "down")); + netdev_info(mgp->dev, "link %s\n", + link_up == MXGEFW_LINK_MYRINET ? + "mismatch (Myrinet detected)" : + "down"); netif_carrier_off(mgp->dev); mgp->link_changes++; } @@ -1503,9 +1498,8 @@ static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp) ntohl(stats->rdma_tags_available)) { mgp->rdma_tags_available = ntohl(stats->rdma_tags_available); - printk(KERN_WARNING "myri10ge: %s: RDMA timed out! " - "%d tags left\n", mgp->dev->name, - mgp->rdma_tags_available); + netdev_warn(mgp->dev, "RDMA timed out! %d tags left\n", + mgp->rdma_tags_available); } mgp->down_cnt += stats->link_down; if (stats->link_down) @@ -1576,8 +1570,7 @@ static irqreturn_t myri10ge_intr(int irq, void *arg) if (send_done_count != tx->pkt_done) myri10ge_tx_done(ss, (int)send_done_count); if (unlikely(i > myri10ge_max_irq_loops)) { - printk(KERN_WARNING "myri10ge: %s: irq stuck?\n", - mgp->dev->name); + netdev_err(mgp->dev, "irq stuck?\n"); stats->valid = 0; schedule_work(&mgp->watchdog_work); } @@ -1614,16 +1607,14 @@ myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) */ ptr = mgp->product_code_string; if (ptr == NULL) { - printk(KERN_ERR "myri10ge: %s: Missing product code\n", - netdev->name); + netdev_err(netdev, "Missing product code\n"); return 0; } for (i = 0; i < 3; i++, ptr++) { ptr = strchr(ptr, '-'); if (ptr == NULL) { - printk(KERN_ERR "myri10ge: %s: Invalid product " - "code %s\n", netdev->name, - mgp->product_code_string); + netdev_err(netdev, "Invalid product code %s\n", + mgp->product_code_string); return 0; } } @@ -2009,17 +2000,15 @@ static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss) mgp->small_bytes + MXGEFW_PAD, 0); if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) { - printk(KERN_ERR - "myri10ge: %s:slice-%d: alloced only %d small bufs\n", - dev->name, slice, ss->rx_small.fill_cnt); + netdev_err(dev, "slice-%d: alloced only %d small bufs\n", + slice, ss->rx_small.fill_cnt); goto abort_with_rx_small_ring; } myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0); if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) { - printk(KERN_ERR - "myri10ge: %s:slice-%d: alloced only %d big bufs\n", - dev->name, slice, ss->rx_big.fill_cnt); + netdev_err(dev, "slice-%d: alloced only %d big bufs\n", + slice, ss->rx_big.fill_cnt); goto abort_with_rx_big_ring; } @@ -2358,7 +2347,7 @@ static int myri10ge_open(struct net_device *dev) mgp->running = MYRI10GE_ETH_STARTING; status = myri10ge_reset(mgp); if (status != 0) { - printk(KERN_ERR "myri10ge: %s: failed reset\n", dev->name); + netdev_err(dev, "failed reset\n"); goto abort_with_nothing; } @@ -2370,9 +2359,7 @@ static int myri10ge_open(struct net_device *dev) status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES, &cmd, 0); if (status != 0) { - printk(KERN_ERR - "myri10ge: %s: failed to set number of slices\n", - dev->name); + netdev_err(dev, "failed to set number of slices\n"); goto abort_with_nothing; } /* setup the indirection table */ @@ -2384,9 +2371,7 @@ static int myri10ge_open(struct net_device *dev) MXGEFW_CMD_GET_RSS_TABLE_OFFSET, &cmd, 0); if (status != 0) { - printk(KERN_ERR - "myri10ge: %s: failed to setup rss tables\n", - dev->name); + netdev_err(dev, "failed to setup rss tables\n"); goto abort_with_nothing; } @@ -2400,9 +2385,7 @@ static int myri10ge_open(struct net_device *dev) status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_ENABLE, &cmd, 0); if (status != 0) { - printk(KERN_ERR - "myri10ge: %s: failed to enable slices\n", - dev->name); + netdev_err(dev, "failed to enable slices\n"); goto abort_with_nothing; } } @@ -2450,9 +2433,7 @@ static int myri10ge_open(struct net_device *dev) status = myri10ge_get_txrx(mgp, slice); if (status != 0) { - printk(KERN_ERR - "myri10ge: %s: failed to get ring sizes or locations\n", - dev->name); + netdev_err(dev, "failed to get ring sizes or locations\n"); goto abort_with_rings; } status = myri10ge_allocate_rings(ss); @@ -2465,9 +2446,7 @@ static int myri10ge_open(struct net_device *dev) if (slice == 0 || mgp->dev->real_num_tx_queues > 1) status = myri10ge_set_stats(mgp, slice); if (status) { - printk(KERN_ERR - "myri10ge: %s: Couldn't set stats DMA\n", - dev->name); + netdev_err(dev, "Couldn't set stats DMA\n"); goto abort_with_rings; } @@ -2498,8 +2477,7 @@ static int myri10ge_open(struct net_device *dev) status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd, 0); if (status) { - printk(KERN_ERR "myri10ge: %s: Couldn't set buffer sizes\n", - dev->name); + netdev_err(dev, "Couldn't set buffer sizes\n"); goto abort_with_rings; } @@ -2511,8 +2489,7 @@ static int myri10ge_open(struct net_device *dev) cmd.data0 = 0; status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_TSO_MODE, &cmd, 0); if (status && status != -ENOSYS) { - printk(KERN_ERR "myri10ge: %s: Couldn't set TSO mode\n", - dev->name); + netdev_err(dev, "Couldn't set TSO mode\n"); goto abort_with_rings; } @@ -2521,8 +2498,7 @@ static int myri10ge_open(struct net_device *dev) status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0); if (status) { - printk(KERN_ERR "myri10ge: %s: Couldn't bring up link\n", - dev->name); + netdev_err(dev, "Couldn't bring up link\n"); goto abort_with_rings; } @@ -2575,15 +2551,12 @@ static int myri10ge_close(struct net_device *dev) status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0); if (status) - printk(KERN_ERR - "myri10ge: %s: Couldn't bring down link\n", - dev->name); + netdev_err(dev, "Couldn't bring down link\n"); wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt, HZ); if (old_down_cnt == mgp->down_cnt) - printk(KERN_ERR "myri10ge: %s never got down irq\n", - dev->name); + netdev_err(dev, "never got down irq\n"); } netif_tx_disable(dev); myri10ge_free_irq(mgp); @@ -2944,9 +2917,7 @@ abort_linearize: idx = (idx + 1) & tx->mask; } while (idx != last_idx); if (skb_is_gso(skb)) { - printk(KERN_ERR - "myri10ge: %s: TSO but wanted to linearize?!?!?\n", - mgp->dev->name); + netdev_err(mgp->dev, "TSO but wanted to linearize?!?!?\n"); goto drop; } @@ -3043,8 +3014,8 @@ static void myri10ge_set_multicast_list(struct net_device *dev) err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1); if (err != 0) { - printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_ENABLE_ALLMULTI," - " error status: %d\n", dev->name, err); + netdev_err(dev, "Failed MXGEFW_ENABLE_ALLMULTI, error status: %d\n", + err); goto abort; } @@ -3058,9 +3029,8 @@ static void myri10ge_set_multicast_list(struct net_device *dev) err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, &cmd, 1); if (err != 0) { - printk(KERN_ERR - "myri10ge: %s: Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS" - ", error status: %d\n", dev->name, err); + netdev_err(dev, "Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, error status: %d\n", + err); goto abort; } @@ -3073,18 +3043,16 @@ static void myri10ge_set_multicast_list(struct net_device *dev) &cmd, 1); if (err != 0) { - printk(KERN_ERR "myri10ge: %s: Failed " - "MXGEFW_JOIN_MULTICAST_GROUP, error status:" - "%d\t", dev->name, err); - printk(KERN_ERR "MAC %pM\n", mc_list->dmi_addr); + netdev_err(dev, "Failed MXGEFW_JOIN_MULTICAST_GROUP, error status:%d %pM\n", + err, mc_list->dmi_addr); goto abort; } } /* Enable multicast filtering */ err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1); if (err != 0) { - printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_DISABLE_ALLMULTI," - "error status: %d\n", dev->name, err); + netdev_err(dev, "Failed MXGEFW_DISABLE_ALLMULTI, error status: %d\n", + err); goto abort; } @@ -3105,9 +3073,8 @@ static int myri10ge_set_mac_address(struct net_device *dev, void *addr) status = myri10ge_update_mac_address(mgp, sa->sa_data); if (status != 0) { - printk(KERN_ERR - "myri10ge: %s: changing mac address failed with %d\n", - dev->name, status); + netdev_err(dev, "changing mac address failed with %d\n", + status); return status; } @@ -3122,12 +3089,10 @@ static int myri10ge_change_mtu(struct net_device *dev, int new_mtu) int error = 0; if ((new_mtu < 68) || (ETH_HLEN + new_mtu > MYRI10GE_MAX_ETHER_MTU)) { - printk(KERN_ERR "myri10ge: %s: new mtu (%d) is not valid\n", - dev->name, new_mtu); + netdev_err(dev, "new mtu (%d) is not valid\n", new_mtu); return -EINVAL; } - printk(KERN_INFO "%s: changing mtu from %d to %d\n", - dev->name, dev->mtu, new_mtu); + netdev_info(dev, "changing mtu from %d to %d\n", dev->mtu, new_mtu); if (mgp->running) { /* if we change the mtu on an active device, we must * reset the device so the firmware sees the change */ @@ -3356,7 +3321,7 @@ static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state) netif_device_detach(netdev); if (netif_running(netdev)) { - printk(KERN_INFO "myri10ge: closing %s\n", netdev->name); + netdev_info(netdev, "closing\n"); rtnl_lock(); myri10ge_close(netdev); rtnl_unlock(); @@ -3383,8 +3348,7 @@ static int myri10ge_resume(struct pci_dev *pdev) msleep(5); /* give card time to respond */ pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor); if (vendor == 0xffff) { - printk(KERN_ERR "myri10ge: %s: device disappeared!\n", - mgp->dev->name); + netdev_err(mgp->dev, "device disappeared!\n"); return -EIO; } @@ -3463,10 +3427,9 @@ static void myri10ge_watchdog(struct work_struct *work) * if the card rebooted due to a parity error * For now, just report it */ reboot = myri10ge_read_reboot(mgp); - printk(KERN_ERR - "myri10ge: %s: NIC rebooted (0x%x),%s resetting\n", - mgp->dev->name, reboot, - myri10ge_reset_recover ? " " : " not"); + netdev_err(mgp->dev, "NIC rebooted (0x%x),%s resetting\n", + reboot, + myri10ge_reset_recover ? "" : " not"); if (myri10ge_reset_recover == 0) return; rtnl_lock(); @@ -3494,31 +3457,26 @@ static void myri10ge_watchdog(struct work_struct *work) if (cmd == 0xffff) { pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor); if (vendor == 0xffff) { - printk(KERN_ERR - "myri10ge: %s: device disappeared!\n", - mgp->dev->name); + netdev_err(mgp->dev, "device disappeared!\n"); return; } } /* Perhaps it is a software error. Try to reset */ - printk(KERN_ERR "myri10ge: %s: device timeout, resetting\n", - mgp->dev->name); + netdev_err(mgp->dev, "device timeout, resetting\n"); for (i = 0; i < mgp->num_slices; i++) { tx = &mgp->ss[i].tx; - printk(KERN_INFO - "myri10ge: %s: (%d): %d %d %d %d %d %d\n", - mgp->dev->name, i, tx->queue_active, tx->req, - tx->done, tx->pkt_start, tx->pkt_done, - (int)ntohl(mgp->ss[i].fw_stats-> - send_done_count)); + netdev_err(mgp->dev, "(%d): %d %d %d %d %d %d\n", + i, tx->queue_active, tx->req, + tx->done, tx->pkt_start, tx->pkt_done, + (int)ntohl(mgp->ss[i].fw_stats-> + send_done_count)); msleep(2000); - printk(KERN_INFO - "myri10ge: %s: (%d): %d %d %d %d %d %d\n", - mgp->dev->name, i, tx->queue_active, tx->req, - tx->done, tx->pkt_start, tx->pkt_done, - (int)ntohl(mgp->ss[i].fw_stats-> - send_done_count)); + netdev_info(mgp->dev, "(%d): %d %d %d %d %d %d\n", + i, tx->queue_active, tx->req, + tx->done, tx->pkt_start, tx->pkt_done, + (int)ntohl(mgp->ss[i].fw_stats-> + send_done_count)); } } @@ -3528,8 +3486,7 @@ static void myri10ge_watchdog(struct work_struct *work) } status = myri10ge_load_firmware(mgp, 1); if (status != 0) - printk(KERN_ERR "myri10ge: %s: failed to load firmware\n", - mgp->dev->name); + netdev_err(mgp->dev, "failed to load firmware\n"); else myri10ge_open(mgp->dev); rtnl_unlock(); @@ -3580,14 +3537,10 @@ static void myri10ge_watchdog_timer(unsigned long arg) /* nic seems like it might be stuck.. */ if (rx_pause_cnt != mgp->watchdog_pause) { if (net_ratelimit()) - printk(KERN_WARNING - "myri10ge %s slice %d:" - "TX paused, check link partner\n", - mgp->dev->name, i); + netdev_err(mgp->dev, "slice %d: TX paused, check link partner\n", + i); } else { - printk(KERN_WARNING - "myri10ge %s slice %d stuck:", - mgp->dev->name, i); + netdev_warn(mgp->dev, "slice %d stuck:", i); reset_needed = 1; } } @@ -4127,13 +4080,11 @@ static struct notifier_block myri10ge_dca_notifier = { static __init int myri10ge_init_module(void) { - printk(KERN_INFO "%s: Version %s\n", myri10ge_driver.name, - MYRI10GE_VERSION_STR); + pr_info("Version %s\n", MYRI10GE_VERSION_STR); if (myri10ge_rss_hash > MXGEFW_RSS_HASH_TYPE_MAX) { - printk(KERN_ERR - "%s: Illegal rssh hash type %d, defaulting to source port\n", - myri10ge_driver.name, myri10ge_rss_hash); + pr_err("Illegal rssh hash type %d, defaulting to source port\n", + myri10ge_rss_hash); myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT; } #ifdef CONFIG_MYRI10GE_DCA