From: Gavin Shan Date: Thu, 24 Apr 2014 08:00:14 +0000 (+1000) Subject: powerpc/eeh: Avoid I/O access during PE reset X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=78954700631f54c3caae22647eb1f544fc4240d4;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git powerpc/eeh: Avoid I/O access during PE reset We have suffered recrusive frozen PE a lot, which was caused by IO accesses during the PE reset. Ben came up with the good idea to keep frozen PE until recovery (BAR restore) gets done. With that, IO accesses during PE reset are dropped by hardware and wouldn't incur the recrusive frozen PE any more. The patch implements the idea. We don't clear the frozen state until PE reset is done completely. During the period, the EEH core expects unfrozen state from backend to keep going. So we have to reuse EEH_PE_RESET flag, which has been set during PE reset, to return normal state from backend. The side effect is we have to clear frozen state for towice (PE reset and clear it explicitly), but that's harmless. We have some limitations on pHyp. pHyp doesn't allow to enable IO or DMA for unfrozen PE. So we don't enable them on unfrozen PE in eeh_pci_enable(). We have to enable IO before grabbing logs on pHyp. Otherwise, 0xFF's is always returned from PCI config space. Also, we had wrong return value from eeh_pci_enable() for EEH_OPT_THAW_DMA case. The patch fixes it too. Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt --- diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index cc728e8c6ee6..25f37532093d 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -238,9 +238,13 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity) * the data from PCI config space because it should return * 0xFF's. For ER, we still retrieve the data from the PCI * config space. + * + * For pHyp, we have to enable IO for log retrieval. Otherwise, + * 0xFF's is always returned from PCI config space. */ if (!(pe->type & EEH_PE_PHB)) { - eeh_pci_enable(pe, EEH_OPT_THAW_MMIO); + if (eeh_probe_mode_devtree()) + eeh_pci_enable(pe, EEH_OPT_THAW_MMIO); eeh_ops->configure_bridge(pe); eeh_pe_restore_bars(pe); @@ -509,16 +513,42 @@ EXPORT_SYMBOL(eeh_check_failure); */ int eeh_pci_enable(struct eeh_pe *pe, int function) { - int rc; + int rc, flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE); + + /* + * pHyp doesn't allow to enable IO or DMA on unfrozen PE. + * Also, it's pointless to enable them on unfrozen PE. So + * we have the check here. + */ + if (function == EEH_OPT_THAW_MMIO || + function == EEH_OPT_THAW_DMA) { + rc = eeh_ops->get_state(pe, NULL); + if (rc < 0) + return rc; + + /* Needn't to enable or already enabled */ + if ((rc == EEH_STATE_NOT_SUPPORT) || + ((rc & flags) == flags)) + return 0; + } rc = eeh_ops->set_option(pe, function); if (rc) - pr_warning("%s: Unexpected state change %d on PHB#%d-PE#%x, err=%d\n", - __func__, function, pe->phb->global_number, pe->addr, rc); + pr_warn("%s: Unexpected state change %d on " + "PHB#%d-PE#%x, err=%d\n", + __func__, function, pe->phb->global_number, + pe->addr, rc); rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC); - if (rc > 0 && (rc & EEH_STATE_MMIO_ENABLED) && - (function == EEH_OPT_THAW_MMIO)) + if (rc <= 0) + return rc; + + if ((function == EEH_OPT_THAW_MMIO) && + (rc & EEH_STATE_MMIO_ENABLED)) + return 0; + + if ((function == EEH_OPT_THAW_DMA) && + (rc & EEH_STATE_DMA_ENABLED)) return 0; return rc; @@ -639,11 +669,13 @@ int eeh_reset_pe(struct eeh_pe *pe) for (i=0; i<3; i++) { eeh_reset_pe_once(pe); + /* + * EEH_PE_ISOLATED is expected to be removed after + * BAR restore. + */ rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC); - if ((rc & flags) == flags) { - eeh_pe_state_clear(pe, EEH_PE_ISOLATED); + if ((rc & flags) == flags) return 0; - } if (rc < 0) { pr_err("%s: Unrecoverable slot failure on PHB#%d-PE#%x", diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index 6d91b51a5ddb..1f1e2cc045a9 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -417,6 +417,36 @@ static void *eeh_pe_detach_dev(void *data, void *userdata) return NULL; } +/* + * Explicitly clear PE's frozen state for PowerNV where + * we have frozen PE until BAR restore is completed. It's + * harmless to clear it for pSeries. To be consistent with + * PE reset (for 3 times), we try to clear the frozen state + * for 3 times as well. + */ +static int eeh_clear_pe_frozen_state(struct eeh_pe *pe) +{ + int i, rc; + + for (i = 0; i < 3; i++) { + rc = eeh_pci_enable(pe, EEH_OPT_THAW_MMIO); + if (rc) + continue; + rc = eeh_pci_enable(pe, EEH_OPT_THAW_DMA); + if (!rc) + break; + } + + /* The PE has been isolated, clear it */ + if (rc) + pr_warn("%s: Can't clear frozen PHB#%x-PE#%x (%d)\n", + __func__, pe->phb->global_number, pe->addr, rc); + else + eeh_pe_state_clear(pe, EEH_PE_ISOLATED); + + return rc; +} + /** * eeh_reset_device - Perform actual reset of a pci slot * @pe: EEH PE @@ -474,6 +504,11 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) eeh_pe_restore_bars(pe); eeh_pe_state_clear(pe, EEH_PE_RESET); + /* Clear frozen state */ + rc = eeh_clear_pe_frozen_state(pe); + if (rc) + return rc; + /* Give the system 5 seconds to finish running the user-space * hotplug shutdown scripts, e.g. ifdown for ethernet. Yes, * this is a hack, but if we don't do this, and try to bring diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c index ed6c68634c9c..6bdae8d84463 100644 --- a/arch/powerpc/platforms/powernv/eeh-ioda.c +++ b/arch/powerpc/platforms/powernv/eeh-ioda.c @@ -268,6 +268,21 @@ static int ioda_eeh_get_state(struct eeh_pe *pe) return EEH_STATE_NOT_SUPPORT; } + /* + * If we're in middle of PE reset, return normal + * state to keep EEH core going. For PHB reset, we + * still expect to have fenced PHB cleared with + * PHB reset. + */ + if (!(pe->type & EEH_PE_PHB) && + (pe->state & EEH_PE_RESET)) { + result = (EEH_STATE_MMIO_ACTIVE | + EEH_STATE_DMA_ACTIVE | + EEH_STATE_MMIO_ENABLED | + EEH_STATE_DMA_ENABLED); + return result; + } + /* Retrieve PE status through OPAL */ pe_no = pe->addr; ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, @@ -347,52 +362,6 @@ static int ioda_eeh_get_state(struct eeh_pe *pe) return result; } -static int ioda_eeh_pe_clear(struct eeh_pe *pe) -{ - struct pci_controller *hose; - struct pnv_phb *phb; - u32 pe_no; - u8 fstate; - u16 pcierr; - s64 ret; - - pe_no = pe->addr; - hose = pe->phb; - phb = pe->phb->private_data; - - /* Clear the EEH error on the PE */ - ret = opal_pci_eeh_freeze_clear(phb->opal_id, - pe_no, OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); - if (ret) { - pr_err("%s: Failed to clear EEH error for " - "PHB#%x-PE#%x, err=%lld\n", - __func__, hose->global_number, pe_no, ret); - return -EIO; - } - - /* - * Read the PE state back and verify that the frozen - * state has been removed. - */ - ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, - &fstate, &pcierr, NULL); - if (ret) { - pr_err("%s: Failed to get EEH status on " - "PHB#%x-PE#%x\n, err=%lld\n", - __func__, hose->global_number, pe_no, ret); - return -EIO; - } - - if (fstate != OPAL_EEH_STOPPED_NOT_FROZEN) { - pr_err("%s: Frozen state not cleared on " - "PHB#%x-PE#%x, sts=%x\n", - __func__, hose->global_number, pe_no, fstate); - return -EIO; - } - - return 0; -} - static s64 ioda_eeh_phb_poll(struct pnv_phb *phb) { s64 rc = OPAL_HARDWARE; @@ -523,21 +492,6 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option) struct pci_bus *bus; int ret; - /* - * Anyway, we have to clear the problematic state for the - * corresponding PE. However, we needn't do it if the PE - * is PHB associated. That means the PHB is having fatal - * errors and it needs reset. Further more, the AIB interface - * isn't reliable any more. - */ - if (!(pe->type & EEH_PE_PHB) && - (option == EEH_RESET_HOT || - option == EEH_RESET_FUNDAMENTAL)) { - ret = ioda_eeh_pe_clear(pe); - if (ret) - return -EIO; - } - /* * The rules applied to reset, either fundamental or hot reset: * @@ -545,6 +499,14 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option) * direct upstream bridge isn't root bridge, we always take hot * reset no matter what option (fundamental or hot) is. Otherwise, * we should do the reset according to the required option. + * + * Here, we have different design to pHyp, which always clear the + * frozen state during PE reset. However, the good idea here from + * benh is to keep frozen state before we get PE reset done completely + * (until BAR restore). With the frozen state, HW drops illegal IO + * or MMIO access, which can incur recrusive frozen PE during PE + * reset. The side effect is that EEH core has to clear the frozen + * state explicitly after BAR restore. */ if (pe->type & EEH_PE_PHB) { ret = ioda_eeh_phb_reset(hose, option);