From: Gertjan van Wingerde Date: Thu, 3 Jun 2010 08:51:59 +0000 (+0200) Subject: rt2x00: Move all register definitions for rt2800 to rt2800.h. X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=785c3c06fb8f4bc3a8bb6ff39e8f6a70f889bde9;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git rt2x00: Move all register definitions for rt2800 to rt2800.h. There is no point on having them separated across 3 files. At the same time rename USB_CYC_CFG to its proper name US_CYC_CNT (as per the datasheet). Signed-off-by: Gertjan van Wingerde Signed-off-by: Ivo van Doorn --- diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index 35afe6376a4d..16bfaa8c4477 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -97,6 +97,21 @@ * Registers. */ +/* + * E2PROM_CSR: PCI EEPROM control register. + * RELOAD: Write 1 to reload eeprom content. + * TYPE: 0: 93c46, 1:93c66. + * LOAD_STATUS: 1:loading, 0:done. + */ +#define E2PROM_CSR 0x0004 +#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000001) +#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000002) +#define E2PROM_CSR_DATA_IN FIELD32(0x00000004) +#define E2PROM_CSR_DATA_OUT FIELD32(0x00000008) +#define E2PROM_CSR_TYPE FIELD32(0x00000030) +#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040) +#define E2PROM_CSR_RELOAD FIELD32(0x00000080) + /* * OPT_14: Unknown register used by rt3xxx devices. */ @@ -320,6 +335,39 @@ #define RX_CRX_IDX 0x0298 #define RX_DRX_IDX 0x029c +/* + * USB_DMA_CFG + * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns. + * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes. + * PHY_CLEAR: phy watch dog enable. + * TX_CLEAR: Clear USB DMA TX path. + * TXOP_HALT: Halt TXOP count down when TX buffer is full. + * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation. + * RX_BULK_EN: Enable USB DMA Rx. + * TX_BULK_EN: Enable USB DMA Tx. + * EP_OUT_VALID: OUT endpoint data valid. + * RX_BUSY: USB DMA RX FSM busy. + * TX_BUSY: USB DMA TX FSM busy. + */ +#define USB_DMA_CFG 0x02a0 +#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT FIELD32(0x000000ff) +#define USB_DMA_CFG_RX_BULK_AGG_LIMIT FIELD32(0x0000ff00) +#define USB_DMA_CFG_PHY_CLEAR FIELD32(0x00010000) +#define USB_DMA_CFG_TX_CLEAR FIELD32(0x00080000) +#define USB_DMA_CFG_TXOP_HALT FIELD32(0x00100000) +#define USB_DMA_CFG_RX_BULK_AGG_EN FIELD32(0x00200000) +#define USB_DMA_CFG_RX_BULK_EN FIELD32(0x00400000) +#define USB_DMA_CFG_TX_BULK_EN FIELD32(0x00800000) +#define USB_DMA_CFG_EP_OUT_VALID FIELD32(0x3f000000) +#define USB_DMA_CFG_RX_BUSY FIELD32(0x40000000) +#define USB_DMA_CFG_TX_BUSY FIELD32(0x80000000) + +/* + * US_CYC_CNT + */ +#define US_CYC_CNT 0x02a4 +#define US_CYC_CNT_CLOCK_CYCLE FIELD32(0x000000ff) + /* * PBF_SYS_CTRL * HOST_RAM_WRITE: enable Host program ram write selection diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 1bf973475f1d..4a01f2a5ce6b 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1620,9 +1620,9 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) rt2800_register_write(rt2x00dev, HW_BEACON_BASE7, 0); if (rt2x00_is_usb(rt2x00dev)) { - rt2800_register_read(rt2x00dev, USB_CYC_CFG, ®); - rt2x00_set_field32(®, USB_CYC_CFG_CLOCK_CYCLE, 30); - rt2800_register_write(rt2x00dev, USB_CYC_CFG, reg); + rt2800_register_read(rt2x00dev, US_CYC_CNT, ®); + rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, 30); + rt2800_register_write(rt2x00dev, US_CYC_CNT, reg); } rt2800_register_read(rt2x00dev, HT_FBK_CFG0, ®); diff --git a/drivers/net/wireless/rt2x00/rt2800pci.h b/drivers/net/wireless/rt2x00/rt2800pci.h index afc8e7da27cb..5a8dda9b5b5a 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.h +++ b/drivers/net/wireless/rt2x00/rt2800pci.h @@ -34,25 +34,6 @@ #ifndef RT2800PCI_H #define RT2800PCI_H -/* - * PCI registers. - */ - -/* - * E2PROM_CSR: EEPROM control register. - * RELOAD: Write 1 to reload eeprom content. - * TYPE: 0: 93c46, 1:93c66. - * LOAD_STATUS: 1:loading, 0:done. - */ -#define E2PROM_CSR 0x0004 -#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000001) -#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000002) -#define E2PROM_CSR_DATA_IN FIELD32(0x00000004) -#define E2PROM_CSR_DATA_OUT FIELD32(0x00000008) -#define E2PROM_CSR_TYPE FIELD32(0x00000030) -#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040) -#define E2PROM_CSR_RELOAD FIELD32(0x00000080) - /* * Queue register offset macros */ diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h index 2bca6a71a7f5..0722badccf86 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.h +++ b/drivers/net/wireless/rt2x00/rt2800usb.h @@ -31,43 +31,6 @@ #ifndef RT2800USB_H #define RT2800USB_H -/* - * USB registers. - */ - -/* - * USB_DMA_CFG - * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns. - * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes. - * PHY_CLEAR: phy watch dog enable. - * TX_CLEAR: Clear USB DMA TX path. - * TXOP_HALT: Halt TXOP count down when TX buffer is full. - * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation. - * RX_BULK_EN: Enable USB DMA Rx. - * TX_BULK_EN: Enable USB DMA Tx. - * EP_OUT_VALID: OUT endpoint data valid. - * RX_BUSY: USB DMA RX FSM busy. - * TX_BUSY: USB DMA TX FSM busy. - */ -#define USB_DMA_CFG 0x02a0 -#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT FIELD32(0x000000ff) -#define USB_DMA_CFG_RX_BULK_AGG_LIMIT FIELD32(0x0000ff00) -#define USB_DMA_CFG_PHY_CLEAR FIELD32(0x00010000) -#define USB_DMA_CFG_TX_CLEAR FIELD32(0x00080000) -#define USB_DMA_CFG_TXOP_HALT FIELD32(0x00100000) -#define USB_DMA_CFG_RX_BULK_AGG_EN FIELD32(0x00200000) -#define USB_DMA_CFG_RX_BULK_EN FIELD32(0x00400000) -#define USB_DMA_CFG_TX_BULK_EN FIELD32(0x00800000) -#define USB_DMA_CFG_EP_OUT_VALID FIELD32(0x3f000000) -#define USB_DMA_CFG_RX_BUSY FIELD32(0x40000000) -#define USB_DMA_CFG_TX_BUSY FIELD32(0x80000000) - -/* - * USB_CYC_CFG - */ -#define USB_CYC_CFG 0x02a4 -#define USB_CYC_CFG_CLOCK_CYCLE FIELD32(0x000000ff) - /* * 8051 firmware image. */