From: Mauricio Faria de Oliveira Date: Tue, 11 Apr 2017 14:46:04 +0000 (-0300) Subject: scsi: ipr: do not set DID_PASSTHROUGH on CHECK CONDITION X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=785a470496d8e0a32e3d39f376984eb2c98ca5b3;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git scsi: ipr: do not set DID_PASSTHROUGH on CHECK CONDITION On a dual controller setup with multipath enabled, some MEDIUM ERRORs caused both paths to be failed, thus I/O got queued/blocked since the 'queue_if_no_path' feature is enabled by default on IPR controllers. This example disabled 'queue_if_no_path' so the I/O failure is seen at the sg_dd program. Notice that after the sg_dd test-case, both paths are in 'failed' state, and both path/priority groups are in 'enabled' state (not 'active') -- which would block I/O with 'queue_if_no_path'. # sg_dd if=/dev/dm-2 bs=4096 count=1 dio=1 verbose=4 blk_sgio=0 <...> read(unix): count=4096, res=-1 sg_dd: reading, skip=0 : Input/output error <...> # dmesg [...] sd 2:2:16:0: [sds] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [...] sd 2:2:16:0: [sds] Sense Key : Medium Error [current] [...] sd 2:2:16:0: [sds] Add. Sense: Unrecovered read error - recommend rewrite the data [...] sd 2:2:16:0: [sds] CDB: Read(10) 28 00 00 00 00 00 00 00 20 00 [...] blk_update_request: I/O error, dev sds, sector 0 [...] device-mapper: multipath: Failing path 65:32. <...> [...] device-mapper: multipath: Failing path 65:224. # multipath -l 1IBM_IPR-0_59C2AE0000001F80 dm-2 IBM ,IPR-0 59C2AE00 size=5.2T features='0' hwhandler='1 alua' wp=rw |-+- policy='service-time 0' prio=0 status=enabled | `- 2:2:16:0 sds 65:32 failed undef running `-+- policy='service-time 0' prio=0 status=enabled `- 1:2:7:0 sdae 65:224 failed undef running This is not the desired behavior. The dm-multipath explicitly checks for the MEDIUM ERROR case (and a few others) so not to fail the path (e.g., I/O to other sectors could potentially happen without problems). See dm-mpath.c :: do_end_io_bio() -> noretry_error() !->! fail_path(). The problem trace is: 1) ipr_scsi_done() // SENSE KEY/CHECK CONDITION detected, go to.. 2) ipr_erp_start() // ipr_is_gscsi() and masked_ioasc OK, go to.. 3) ipr_gen_sense() // masked_ioasc is IPR_IOASC_MED_DO_NOT_REALLOC, // so set DID_PASSTHROUGH. 4) scsi_decide_disposition() // check for DID_PASSTHROUGH and return // early on, faking a DID_OK.. *instead* // of reaching scsi_check_sense(). // Had it reached the latter, that would // set host_byte to DID_MEDIUM_ERROR. 5) scsi_finish_command() 6) scsi_io_completion() 7) __scsi_error_from_host_byte() // That would be converted to -ENODATA <...> 8) dm_softirq_done() 9) multipath_end_io() 10) do_end_io() 11) noretry_error() // And that is checked in dm-mpath :: noretry_error() // which would cause fail_path() not to be called. With this patch applied, the I/O is failed but the paths are not. This multipath device continues accepting more I/O requests without blocking. (and notice the different host byte/driver byte handling per SCSI layer). # dmesg [...] sd 2:2:7:0: [sdaf] Done: SUCCESS Result: hostbyte=0x13 driverbyte=DRIVER_OK [...] sd 2:2:7:0: [sdaf] CDB: Read(10) 28 00 00 00 00 00 00 00 40 00 [...] sd 2:2:7:0: [sdaf] Sense Key : Medium Error [current] [...] sd 2:2:7:0: [sdaf] Add. Sense: Unrecovered read error - recommend rewrite the data [...] blk_update_request: critical medium error, dev sdaf, sector 0 [...] blk_update_request: critical medium error, dev dm-6, sector 0 [...] sd 2:2:7:0: [sdaf] Done: SUCCESS Result: hostbyte=0x13 driverbyte=DRIVER_OK [...] sd 2:2:7:0: [sdaf] CDB: Read(10) 28 00 00 00 00 00 00 00 10 00 [...] sd 2:2:7:0: [sdaf] Sense Key : Medium Error [current] [...] sd 2:2:7:0: [sdaf] Add. Sense: Unrecovered read error - recommend rewrite the data [...] blk_update_request: critical medium error, dev sdaf, sector 0 [...] blk_update_request: critical medium error, dev dm-6, sector 0 [...] Buffer I/O error on dev dm-6, logical block 0, async page read # multipath -l 1IBM_IPR-0_59C2AE0000001F80 1IBM_IPR-0_59C2AE0000001F80 dm-6 IBM ,IPR-0 59C2AE00 size=5.2T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw |-+- policy='service-time 0' prio=0 status=active | `- 2:2:7:0 sdaf 65:240 active undef running `-+- policy='service-time 0' prio=0 status=enabled `- 1:2:7:0 sdh 8:112 active undef running Signed-off-by: Mauricio Faria de Oliveira Acked-by: Brian King Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 835c59c777f2..0d782135ac55 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -6293,7 +6293,12 @@ static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg, break; case IPR_IOASC_MED_DO_NOT_REALLOC: /* prevent retries */ case IPR_IOASA_IR_DUAL_IOA_DISABLED: - scsi_cmd->result |= (DID_PASSTHROUGH << 16); + /* + * exception: do not set DID_PASSTHROUGH on CHECK CONDITION + * so SCSI mid-layer and upper layers handle it accordingly. + */ + if (scsi_cmd->result != SAM_STAT_CHECK_CONDITION) + scsi_cmd->result |= (DID_PASSTHROUGH << 16); break; case IPR_IOASC_BUS_WAS_RESET: case IPR_IOASC_BUS_WAS_RESET_BY_OTHER: