From: Antoine Ténart Date: Tue, 22 Aug 2017 17:08:25 +0000 (+0200) Subject: net: mvpp2: initialize the XLG MAC when using a port X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=77321959feb9bdcfeeb2a2154d6fb831fb1991c2;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git net: mvpp2: initialize the XLG MAC when using a port This adds a routine to initialize the XLG MAC at the port level when using a port and the XAUI/10GKR interface mode. This wasn't done until this commit, and the mvpp2 driver was relying on the bootloader/firmware initialization. This doesn't mean everything is configured in the mvpp2 driver now, but it helps reducing the gap. Signed-off-by: Antoine Tenart Tested-by: Marcin Wojtas Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c index 2ab7366ac90f..64e0a1bae7d0 100644 --- a/drivers/net/ethernet/marvell/mvpp2.c +++ b/drivers/net/ethernet/marvell/mvpp2.c @@ -361,6 +361,7 @@ #define MVPP22_XLG_CTRL0_REG 0x100 #define MVPP22_XLG_CTRL0_PORT_EN BIT(0) #define MVPP22_XLG_CTRL0_MAC_RESET_DIS BIT(1) +#define MVPP22_XLG_CTRL0_RX_FLOW_CTRL_EN BIT(7) #define MVPP22_XLG_CTRL0_MIB_CNT_DIS BIT(14) #define MVPP22_XLG_CTRL3_REG 0x11c @@ -368,6 +369,11 @@ #define MVPP22_XLG_CTRL3_MACMODESELECT_GMAC (0 << 13) #define MVPP22_XLG_CTRL3_MACMODESELECT_10G (1 << 13) +#define MVPP22_XLG_CTRL4_REG 0x184 +#define MVPP22_XLG_CTRL4_FWD_FC BIT(5) +#define MVPP22_XLG_CTRL4_FWD_PFC BIT(6) +#define MVPP22_XLG_CTRL4_MACMODSELECT_GMAC BIT(12) + /* SMI registers. PPv2.2 only, relative to priv->iface_base. */ #define MVPP22_SMI_MISC_CFG_REG 0x1204 #define MVPP22_SMI_POLLING_EN BIT(10) @@ -4337,6 +4343,23 @@ static void mvpp2_port_mii_gmac_configure(struct mvpp2_port *port) writel(val, port->base + MVPP2_GMAC_AUTONEG_CONFIG); } +static void mvpp2_port_mii_xlg_configure(struct mvpp2_port *port) +{ + u32 val; + + if (port->gop_id != 0) + return; + + val = readl(port->base + MVPP22_XLG_CTRL0_REG); + val |= MVPP22_XLG_CTRL0_RX_FLOW_CTRL_EN; + writel(val, port->base + MVPP22_XLG_CTRL0_REG); + + val = readl(port->base + MVPP22_XLG_CTRL4_REG); + val &= ~MVPP22_XLG_CTRL4_MACMODSELECT_GMAC; + val |= MVPP22_XLG_CTRL4_FWD_FC | MVPP22_XLG_CTRL4_FWD_PFC; + writel(val, port->base + MVPP22_XLG_CTRL4_REG); +} + static void mvpp22_port_mii_set(struct mvpp2_port *port) { u32 val; @@ -4367,6 +4390,8 @@ static void mvpp2_port_mii_set(struct mvpp2_port *port) port->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID || port->phy_interface == PHY_INTERFACE_MODE_SGMII) mvpp2_port_mii_gmac_configure(port); + else if (port->phy_interface == PHY_INTERFACE_MODE_10GKR) + mvpp2_port_mii_xlg_configure(port); } static void mvpp2_port_fc_adv_enable(struct mvpp2_port *port)