From: Ian Abbott Date: Thu, 2 Jun 2005 09:34:11 +0000 (+0100) Subject: [PATCH] USB: ftdi_sio: avoid losing received data in tty-ldisc X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=76854ceac3ef3408ab9a50a2521147fb14779f58;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git [PATCH] USB: ftdi_sio: avoid losing received data in tty-ldisc ftdi_sio: Avoid losing bytes at tty-ldisc. This patch was originally developed by Daniel Smertnig. I (Ian Abbott) made a few changes. It has been tested by both Daniel and I, at least for raw, non-canonical receive data processing. Here is Daniel's original description of the patch: === During a project in which I was using a FTDI 232BM to transmit data at relative high speeds (625kBit/s), I noticed a problem where data was lost even if flow control was enabled: The FTDI-Driver receives 512 Bytes of data over USB at a time, which consists of 8 64-Byte packets. Subtracting the 2 bytes of status information included in each packet this gives 496 "real" data bytes per read. This data is passed (indirectly, via the flip buffers) to the tty line discipline which takes care of throttling when there the free buffer space reaches TTY_THRESHOLD_THROTTLE (128). Because the FTDI driver processes up to 496 bytes at a time, throttling won't happen in time and the line discipline will discard the remaining bytes. To avoid this the patch passes data in 62-byte blocks to the tty layer and checks the available space in the ldisc-buffers. If there isn't enough free space, processing the rest of the data is delayed using a workqueue. Note: The original problem should be easily reproducible with a userspace program which does slow & small reads. === Signed-off-by: Ian Abbott Signed-off-by: Daniel Smertnig Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 051c3a77b41b..3bfcc7b9f861 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -264,7 +264,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.4.1" +#define DRIVER_VERSION "v1.4.2" #define DRIVER_AUTHOR "Greg Kroah-Hartman , Bill Ryder , Kuba Ober " #define DRIVER_DESC "USB FTDI Serial Converters Driver" @@ -687,6 +687,8 @@ struct ftdi_private { char prev_status, diff_status; /* Used for TIOCMIWAIT */ __u8 rx_flags; /* receive state flags (throttling) */ spinlock_t rx_lock; /* spinlock for receive state */ + struct work_struct rx_work; + int rx_processed; __u16 interface; /* FT2232C port interface (0 for FT232/245) */ @@ -717,7 +719,7 @@ static int ftdi_write_room (struct usb_serial_port *port); static int ftdi_chars_in_buffer (struct usb_serial_port *port); static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs); static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs); -static void ftdi_process_read (struct usb_serial_port *port); +static void ftdi_process_read (void *param); static void ftdi_set_termios (struct usb_serial_port *port, struct termios * old); static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file); static int ftdi_tiocmset (struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear); @@ -1387,6 +1389,8 @@ static int ftdi_common_startup (struct usb_serial *serial) port->read_urb->transfer_buffer_length = BUFSZ; } + INIT_WORK(&priv->rx_work, ftdi_process_read, port); + /* Free port's existing write urb and transfer buffer. */ if (port->write_urb) { usb_free_urb (port->write_urb); @@ -1617,6 +1621,7 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) spin_unlock_irqrestore(&priv->rx_lock, flags); /* Start reading from the device */ + priv->rx_processed = 0; usb_fill_bulk_urb(port->read_urb, dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, @@ -1667,6 +1672,10 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp) err("Error from RTS LOW urb"); } } /* Note change no line if hupcl is off */ + + /* cancel any scheduled reading */ + cancel_delayed_work(&priv->rx_work); + flush_scheduled_work(); /* shutdown our bulk read */ if (port->read_urb) @@ -1862,23 +1871,14 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs) return; } - /* If throttled, delay receive processing until unthrottled. */ - spin_lock(&priv->rx_lock); - if (priv->rx_flags & THROTTLED) { - dbg("Deferring read urb processing until unthrottled"); - priv->rx_flags |= ACTUALLY_THROTTLED; - spin_unlock(&priv->rx_lock); - return; - } - spin_unlock(&priv->rx_lock); - ftdi_process_read(port); } /* ftdi_read_bulk_callback */ -static void ftdi_process_read (struct usb_serial_port *port) +static void ftdi_process_read (void *param) { /* ftdi_process_read */ + struct usb_serial_port *port = (struct usb_serial_port*)param; struct urb *urb; struct tty_struct *tty; struct ftdi_private *priv; @@ -1889,6 +1889,7 @@ static void ftdi_process_read (struct usb_serial_port *port) int result; int need_flip; int packet_offset; + unsigned long flags; dbg("%s - port %d", __FUNCTION__, port->number); @@ -1915,12 +1916,18 @@ static void ftdi_process_read (struct usb_serial_port *port) data = urb->transfer_buffer; - /* The first two bytes of every read packet are status */ - if (urb->actual_length > 2) { - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + if (priv->rx_processed) { + dbg("%s - already processed: %d bytes, %d remain", __FUNCTION__, + priv->rx_processed, + urb->actual_length - priv->rx_processed); } else { - dbg("Status only: %03oo %03oo",data[0],data[1]); - } + /* The first two bytes of every read packet are status */ + if (urb->actual_length > 2) { + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + } else { + dbg("Status only: %03oo %03oo",data[0],data[1]); + } + } /* TO DO -- check for hung up line and handle appropriately: */ @@ -1929,8 +1936,12 @@ static void ftdi_process_read (struct usb_serial_port *port) /* if CD is dropped and the line is not CLOCAL then we should hangup */ need_flip = 0; - for (packet_offset=0; packet_offset < urb->actual_length; packet_offset += PKTSZ) { + for (packet_offset = priv->rx_processed; packet_offset < urb->actual_length; packet_offset += PKTSZ) { + int length; + /* Compare new line status to the old one, signal if different */ + /* N.B. packet may be processed more than once, but differences + * are only processed once. */ if (priv != NULL) { char new_status = data[packet_offset+0] & FTDI_STATUS_B0_MASK; if (new_status != priv->prev_status) { @@ -1940,6 +1951,35 @@ static void ftdi_process_read (struct usb_serial_port *port) } } + length = min(PKTSZ, urb->actual_length-packet_offset)-2; + if (length < 0) { + err("%s - bad packet length: %d", __FUNCTION__, length+2); + length = 0; + } + + /* have to make sure we don't overflow the buffer + with tty_insert_flip_char's */ + if (tty->flip.count+length > TTY_FLIPBUF_SIZE) { + tty_flip_buffer_push(tty); + need_flip = 0; + + if (tty->flip.count != 0) { + /* flip didn't work, this happens when ftdi_process_read() is + * called from ftdi_unthrottle, because TTY_DONT_FLIP is set */ + dbg("%s - flip buffer push failed", __FUNCTION__); + break; + } + } + if (priv->rx_flags & THROTTLED) { + dbg("%s - throttled", __FUNCTION__); + break; + } + if (tty->ldisc.receive_room(tty)-tty->flip.count < length) { + /* break out & wait for throttling/unthrottling to happen */ + dbg("%s - receive room low", __FUNCTION__); + break; + } + /* Handle errors and break */ error_flag = TTY_NORMAL; /* Although the device uses a bitmask and hence can have multiple */ @@ -1962,13 +2002,8 @@ static void ftdi_process_read (struct usb_serial_port *port) error_flag = TTY_FRAME; dbg("FRAMING error"); } - if (urb->actual_length > packet_offset + 2) { - for (i = 2; (i < PKTSZ) && ((i+packet_offset) < urb->actual_length); ++i) { - /* have to make sure we don't overflow the buffer - with tty_insert_flip_char's */ - if(tty->flip.count >= TTY_FLIPBUF_SIZE) { - tty_flip_buffer_push(tty); - } + if (length > 0) { + for (i = 2; i < length+2; i++) { /* Note that the error flag is duplicated for every character received since we don't know which character it applied to */ @@ -2005,6 +2040,35 @@ static void ftdi_process_read (struct usb_serial_port *port) tty_flip_buffer_push(tty); } + if (packet_offset < urb->actual_length) { + /* not completely processed - record progress */ + priv->rx_processed = packet_offset; + dbg("%s - incomplete, %d bytes processed, %d remain", + __FUNCTION__, packet_offset, + urb->actual_length - packet_offset); + /* check if we were throttled while processing */ + spin_lock_irqsave(&priv->rx_lock, flags); + if (priv->rx_flags & THROTTLED) { + priv->rx_flags |= ACTUALLY_THROTTLED; + spin_unlock_irqrestore(&priv->rx_lock, flags); + dbg("%s - deferring remainder until unthrottled", + __FUNCTION__); + return; + } + spin_unlock_irqrestore(&priv->rx_lock, flags); + /* if the port is closed stop trying to read */ + if (port->open_count > 0){ + /* delay processing of remainder */ + schedule_delayed_work(&priv->rx_work, 1); + } else { + dbg("%s - port is closed", __FUNCTION__); + } + return; + } + + /* urb is completely processed */ + priv->rx_processed = 0; + /* if the port is closed stop trying to read */ if (port->open_count > 0){ /* Continue trying to always read */ @@ -2444,7 +2508,7 @@ static void ftdi_unthrottle (struct usb_serial_port *port) spin_unlock_irqrestore(&priv->rx_lock, flags); if (actually_throttled) - ftdi_process_read(port); + schedule_work(&priv->rx_work); } static int __init ftdi_init (void)