From: Christian Krafft Date: Fri, 20 Jul 2007 19:39:22 +0000 (+0200) Subject: [CELL] cbe_cpufreq: reorganize code X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=74889e41d9a1f80928130a02af9b010673bc5ba7;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git [CELL] cbe_cpufreq: reorganize code This patch reorganizes the code of the driver into three files. Two cbe_cpufreq_pmi.c and cbe_cpufreq_pervasive.c care about hardware. cbe_cpufreq.c contains the logic. There is no changed behaviour, except that the PMI related function is now located in a seperate module cbe_cpufreq_pmi. This module will be required by cbe_cpufreq, if CONFIG_CBE_CPUFREQ_PMI has been set. Signed-off-by: Christian Krafft Signed-off-by: Arnd Bergmann --- diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 9b2b386ccf48..ac8032034fb8 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -73,4 +73,14 @@ config CBE_CPUFREQ For details, take a look at . If you don't have such processor, say N +config CBE_CPUFREQ_PMI + tristate "CBE frequency scaling using PMI interface" + depends on CBE_CPUFREQ && PPC_PMI && EXPERIMENTAL + default n + help + Select this, if you want to use the PMI interface + to switch frequencies. Using PMI, the + processor will not only be able to run at lower speed, + but also at lower core voltage. + endmenu diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile index 869af89df6ff..be059718becd 100644 --- a/arch/powerpc/platforms/cell/Makefile +++ b/arch/powerpc/platforms/cell/Makefile @@ -4,7 +4,9 @@ obj-$(CONFIG_PPC_CELL_NATIVE) += interrupt.o iommu.o setup.o \ obj-$(CONFIG_CBE_RAS) += ras.o obj-$(CONFIG_CBE_THERM) += cbe_thermal.o -obj-$(CONFIG_CBE_CPUFREQ) += cbe_cpufreq.o +obj-$(CONFIG_CBE_CPUFREQ_PMI) += cbe_cpufreq_pmi.o +obj-$(CONFIG_CBE_CPUFREQ) += cbe-cpufreq.o +cbe-cpufreq-y += cbe_cpufreq_pervasive.o cbe_cpufreq.o ifeq ($(CONFIG_SMP),y) obj-$(CONFIG_PPC_CELL_NATIVE) += smp.o diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.c b/arch/powerpc/platforms/cell/cbe_cpufreq.c index a62562ee1461..9a9932624c0c 100644 --- a/arch/powerpc/platforms/cell/cbe_cpufreq.c +++ b/arch/powerpc/platforms/cell/cbe_cpufreq.c @@ -1,7 +1,7 @@ /* * cpufreq driver for the cell processor * - * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 * * Author: Christian Krafft * @@ -21,18 +21,10 @@ */ #include -#include - -#include -#include #include -#include -#include -#include -#include #include - -#include "cbe_regs.h" +#include +#include "cbe_cpufreq.h" static DEFINE_MUTEX(cbe_switch_mutex); @@ -50,183 +42,24 @@ static struct cpufreq_frequency_table cbe_freqs[] = { {0, CPUFREQ_TABLE_END}, }; -/* to write to MIC register */ -static u64 MIC_Slow_Fast_Timer_table[] = { - [0 ... 7] = 0x007fc00000000000ull, -}; - -/* more values for the MIC */ -static u64 MIC_Slow_Next_Timer_table[] = { - 0x0000240000000000ull, - 0x0000268000000000ull, - 0x000029C000000000ull, - 0x00002D0000000000ull, - 0x0000300000000000ull, - 0x0000334000000000ull, - 0x000039C000000000ull, - 0x00003FC000000000ull, -}; - -static u8 pmi_slow_mode_limit[MAX_BE]; - /* * hardware specific functions */ -static bool cbe_cpufreq_has_pmi; - -#ifdef CONFIG_PPC_PMI -static int set_pmode_pmi(int cpu, unsigned int pmode) -{ - int ret; - pmi_message_t pmi_msg; -#ifdef DEBUG - long time; -#endif - - pmi_msg.type = PMI_TYPE_FREQ_CHANGE; - pmi_msg.data1 = cbe_cpu_to_node(cpu); - pmi_msg.data2 = pmode; - -#ifdef DEBUG - time = jiffies; -#endif - - pmi_send_message(pmi_msg); - ret = pmi_msg.data2; - - pr_debug("PMI returned slow mode %d\n", ret); - -#ifdef DEBUG - time = jiffies - time; /* actual cycles (not cpu cycles!) */ - time = jiffies_to_msecs(time); - pr_debug("had to wait %lu ms for a transition using PMI.\n", time); -#endif - return ret; -} -#endif - -static int get_pmode(int cpu) -{ - int ret; - struct cbe_pmd_regs __iomem *pmd_regs; - - pmd_regs = cbe_get_cpu_pmd_regs(cpu); - ret = in_be64(&pmd_regs->pmsr) & 0x07; - - return ret; -} - -static int set_pmode_reg(int cpu, unsigned int pmode) -{ - struct cbe_pmd_regs __iomem *pmd_regs; - struct cbe_mic_tm_regs __iomem *mic_tm_regs; - u64 flags; - u64 value; -#ifdef DEBUG - long time; -#endif - - local_irq_save(flags); - - mic_tm_regs = cbe_get_cpu_mic_tm_regs(cpu); - pmd_regs = cbe_get_cpu_pmd_regs(cpu); - -#ifdef DEBUG - time = jiffies; -#endif - out_be64(&mic_tm_regs->slow_fast_timer_0, MIC_Slow_Fast_Timer_table[pmode]); - out_be64(&mic_tm_regs->slow_fast_timer_1, MIC_Slow_Fast_Timer_table[pmode]); - - out_be64(&mic_tm_regs->slow_next_timer_0, MIC_Slow_Next_Timer_table[pmode]); - out_be64(&mic_tm_regs->slow_next_timer_1, MIC_Slow_Next_Timer_table[pmode]); - - value = in_be64(&pmd_regs->pmcr); - /* set bits to zero */ - value &= 0xFFFFFFFFFFFFFFF8ull; - /* set bits to next pmode */ - value |= pmode; - - out_be64(&pmd_regs->pmcr, value); - -#ifdef DEBUG - /* wait until new pmode appears in status register */ - value = in_be64(&pmd_regs->pmsr) & 0x07; - while(value != pmode) { - cpu_relax(); - value = in_be64(&pmd_regs->pmsr) & 0x07; - } - - time = jiffies - time; - time = jiffies_to_msecs(time); - pr_debug("had to wait %lu ms for a transition using " \ - "the pervasive unit.\n", time); -#endif - local_irq_restore(flags); - - return 0; -} - -static int set_pmode(int cpu, unsigned int slow_mode) +static int set_pmode(unsigned int cpu, unsigned int slow_mode) { int rc; -#ifdef CONFIG_PPC_PMI + if (cbe_cpufreq_has_pmi) - rc = set_pmode_pmi(cpu, slow_mode); + rc = cbe_cpufreq_set_pmode_pmi(cpu, slow_mode); else -#endif - rc = set_pmode_reg(cpu, slow_mode); + rc = cbe_cpufreq_set_pmode(cpu, slow_mode); - pr_debug("register contains slow mode %d\n", get_pmode(cpu)); + pr_debug("register contains slow mode %d\n", cbe_cpufreq_get_pmode(cpu)); return rc; } -static void cbe_cpufreq_handle_pmi(pmi_message_t pmi_msg) -{ - u8 node; slow_mode; - - BUG_ON(pmi_msg.type != PMI_TYPE_FREQ_CHANGE); - - node = pmi_msg.data1; - slow_mode = pmi_msg.data2; - - pmi_slow_mode_limit[node] = slow_mode; - - pr_debug("cbe_handle_pmi: node: %d, max slow_mode=%d\n", slow_mode); -} - -static int pmi_notifier(struct notifier_block *nb, - unsigned long event, void *data) -{ - struct cpufreq_policy *policy = data; - u8 node; - - node = cbe_cpu_to_node(policy->cpu); - - pr_debug("got notified, event=%lu, node=%u\n", event, node); - - if (pmi_slow_mode_limit[node] != 0) { - pr_debug("limiting node %d to slow mode %d\n", - node, pmi_slow_mode_limit[node]); - - cpufreq_verify_within_limits(policy, 0, - cbe_freqs[pmi_slow_mode_limit[node]].frequency); - } - - return 0; -} - -static struct notifier_block pmi_notifier_block = { - .notifier_call = pmi_notifier, -}; - -static struct pmi_handler cbe_pmi_handler = { - .type = PMI_TYPE_FREQ_CHANGE, - .handle_pmi_message = cbe_cpufreq_handle_pmi, -}; - - /* * cpufreq functions */ @@ -270,7 +103,7 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy) * of a transition */ policy->cpuinfo.transition_latency = 25000; - cur_pmode = get_pmode(policy->cpu); + cur_pmode = cbe_cpufreq_get_pmode(policy->cpu); pr_debug("current pmode is at %d\n",cur_pmode); policy->cur = cbe_freqs[cur_pmode].frequency; @@ -297,7 +130,6 @@ static int cbe_cpufreq_verify(struct cpufreq_policy *policy) return cpufreq_frequency_table_verify(policy, cbe_freqs); } - static int cbe_cpufreq_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) @@ -352,22 +184,12 @@ static int __init cbe_cpufreq_init(void) if (!machine_is(cell)) return -ENODEV; - cbe_cpufreq_has_pmi = pmi_register_handler(&cbe_pmi_handler) == 0; - - if (cbe_cpufreq_has_pmi) - cpufreq_register_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER); - return cpufreq_register_driver(&cbe_cpufreq_driver); } static void __exit cbe_cpufreq_exit(void) { cpufreq_unregister_driver(&cbe_cpufreq_driver); - - if (cbe_cpufreq_has_pmi) { - cpufreq_unregister_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER); - pmi_unregister_handler(&cbe_pmi_handler); - } } module_init(cbe_cpufreq_init); diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.h b/arch/powerpc/platforms/cell/cbe_cpufreq.h new file mode 100644 index 000000000000..c1d86bfa92ff --- /dev/null +++ b/arch/powerpc/platforms/cell/cbe_cpufreq.h @@ -0,0 +1,24 @@ +/* + * cbe_cpufreq.h + * + * This file contains the definitions used by the cbe_cpufreq driver. + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 + * + * Author: Christian Krafft + * + */ + +#include +#include + +int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode); +int cbe_cpufreq_get_pmode(int cpu); + +int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode); + +#if defined(CONFIG_CBE_CPUFREQ_PMI) || defined(CONFIG_CBE_CPUFREQ_PMI_MODULE) +extern bool cbe_cpufreq_has_pmi; +#else +#define cbe_cpufreq_has_pmi (0) +#endif diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c new file mode 100644 index 000000000000..163263b3e1cd --- /dev/null +++ b/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c @@ -0,0 +1,115 @@ +/* + * pervasive backend for the cbe_cpufreq driver + * + * This driver makes use of the pervasive unit to + * engage the desired frequency. + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 + * + * Author: Christian Krafft + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "cbe_regs.h" +#include "cbe_cpufreq.h" + +/* to write to MIC register */ +static u64 MIC_Slow_Fast_Timer_table[] = { + [0 ... 7] = 0x007fc00000000000ull, +}; + +/* more values for the MIC */ +static u64 MIC_Slow_Next_Timer_table[] = { + 0x0000240000000000ull, + 0x0000268000000000ull, + 0x000029C000000000ull, + 0x00002D0000000000ull, + 0x0000300000000000ull, + 0x0000334000000000ull, + 0x000039C000000000ull, + 0x00003FC000000000ull, +}; + + +int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode) +{ + struct cbe_pmd_regs __iomem *pmd_regs; + struct cbe_mic_tm_regs __iomem *mic_tm_regs; + u64 flags; + u64 value; +#ifdef DEBUG + long time; +#endif + + local_irq_save(flags); + + mic_tm_regs = cbe_get_cpu_mic_tm_regs(cpu); + pmd_regs = cbe_get_cpu_pmd_regs(cpu); + +#ifdef DEBUG + time = jiffies; +#endif + + out_be64(&mic_tm_regs->slow_fast_timer_0, MIC_Slow_Fast_Timer_table[pmode]); + out_be64(&mic_tm_regs->slow_fast_timer_1, MIC_Slow_Fast_Timer_table[pmode]); + + out_be64(&mic_tm_regs->slow_next_timer_0, MIC_Slow_Next_Timer_table[pmode]); + out_be64(&mic_tm_regs->slow_next_timer_1, MIC_Slow_Next_Timer_table[pmode]); + + value = in_be64(&pmd_regs->pmcr); + /* set bits to zero */ + value &= 0xFFFFFFFFFFFFFFF8ull; + /* set bits to next pmode */ + value |= pmode; + + out_be64(&pmd_regs->pmcr, value); + +#ifdef DEBUG + /* wait until new pmode appears in status register */ + value = in_be64(&pmd_regs->pmsr) & 0x07; + while (value != pmode) { + cpu_relax(); + value = in_be64(&pmd_regs->pmsr) & 0x07; + } + + time = jiffies - time; + time = jiffies_to_msecs(time); + pr_debug("had to wait %lu ms for a transition using " \ + "pervasive unit\n", time); +#endif + local_irq_restore(flags); + + return 0; +} + + +int cbe_cpufreq_get_pmode(int cpu) +{ + int ret; + struct cbe_pmd_regs __iomem *pmd_regs; + + pmd_regs = cbe_get_cpu_pmd_regs(cpu); + ret = in_be64(&pmd_regs->pmsr) & 0x07; + + return ret; +} + diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c new file mode 100644 index 000000000000..fc6f38982ff4 --- /dev/null +++ b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c @@ -0,0 +1,148 @@ +/* + * pmi backend for the cbe_cpufreq driver + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 + * + * Author: Christian Krafft + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#ifdef DEBUG +#include +#endif + +#include "cbe_regs.h" +#include "cbe_cpufreq.h" + +static u8 pmi_slow_mode_limit[MAX_CBE]; + +bool cbe_cpufreq_has_pmi = false; +EXPORT_SYMBOL_GPL(cbe_cpufreq_has_pmi); + +/* + * hardware specific functions + */ + +int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode) +{ + int ret; + pmi_message_t pmi_msg; +#ifdef DEBUG + long time; +#endif + pmi_msg.type = PMI_TYPE_FREQ_CHANGE; + pmi_msg.data1 = cbe_cpu_to_node(cpu); + pmi_msg.data2 = pmode; + +#ifdef DEBUG + time = jiffies; +#endif + pmi_send_message(pmi_msg); + +#ifdef DEBUG + time = jiffies - time; + time = jiffies_to_msecs(time); + pr_debug("had to wait %lu ms for a transition using " \ + "PMI\n", time); +#endif + ret = pmi_msg.data2; + pr_debug("PMI returned slow mode %d\n", ret); + + return ret; +} +EXPORT_SYMBOL_GPL(cbe_cpufreq_set_pmode_pmi); + + +static void cbe_cpufreq_handle_pmi(pmi_message_t pmi_msg) +{ + u8 node, slow_mode; + + BUG_ON(pmi_msg.type != PMI_TYPE_FREQ_CHANGE); + + node = pmi_msg.data1; + slow_mode = pmi_msg.data2; + + pmi_slow_mode_limit[node] = slow_mode; + + pr_debug("cbe_handle_pmi: node: %d max_freq: %d\n", node, slow_mode); +} + +static int pmi_notifier(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct cpufreq_policy *policy = data; + struct cpufreq_frequency_table *cbe_freqs; + u8 node; + + cbe_freqs = cpufreq_frequency_get_table(policy->cpu); + node = cbe_cpu_to_node(policy->cpu); + + pr_debug("got notified, event=%lu, node=%u\n", event, node); + + if (pmi_slow_mode_limit[node] != 0) { + pr_debug("limiting node %d to slow mode %d\n", + node, pmi_slow_mode_limit[node]); + + cpufreq_verify_within_limits(policy, 0, + + cbe_freqs[pmi_slow_mode_limit[node]].frequency); + } + + return 0; +} + +static struct notifier_block pmi_notifier_block = { + .notifier_call = pmi_notifier, +}; + +static struct pmi_handler cbe_pmi_handler = { + .type = PMI_TYPE_FREQ_CHANGE, + .handle_pmi_message = cbe_cpufreq_handle_pmi, +}; + + + +static int __init cbe_cpufreq_pmi_init(void) +{ + cbe_cpufreq_has_pmi = pmi_register_handler(&cbe_pmi_handler) == 0; + + if (!cbe_cpufreq_has_pmi) + return -ENODEV; + + cpufreq_register_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER); + + return 0; +} + +static void __exit cbe_cpufreq_pmi_exit(void) +{ + cpufreq_unregister_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER); + pmi_unregister_handler(&cbe_pmi_handler); +} + +module_init(cbe_cpufreq_pmi_init); +module_exit(cbe_cpufreq_pmi_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Christian Krafft ");