From: Jonathan Cameron Date: Fri, 11 Feb 2011 14:07:40 +0000 (+0000) Subject: staging:iio:meter remove stubs from ade7753. X-Git-Tag: MMI-PSA29.97-13-9~20521^2~503 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=72db6eb674d1a921f31d0fb7b50b6d76cb1c630a;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git staging:iio:meter remove stubs from ade7753. General cleanup and use of standard functions to simplfy some spi reads as well. Signed-off-by: Jonathan Cameron Acked-by: Michael Hennerich Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/iio/meter/ade7753.c b/drivers/staging/iio/meter/ade7753.c index e72afbd2b841..8b86d82c3b32 100644 --- a/drivers/staging/iio/meter/ade7753.c +++ b/drivers/staging/iio/meter/ade7753.c @@ -1,5 +1,5 @@ /* - * ADE7753 Single-Phase Multifunction Metering IC with di/dt Sensor Interface Driver + * ADE7753 Single-Phase Multifunction Metering IC with di/dt Sensor Interface * * Copyright 2010 Analog Devices Inc. * @@ -23,9 +23,9 @@ #include "meter.h" #include "ade7753.h" -int ade7753_spi_write_reg_8(struct device *dev, - u8 reg_address, - u8 val) +static int ade7753_spi_write_reg_8(struct device *dev, + u8 reg_address, + u8 val) { int ret; struct iio_dev *indio_dev = dev_get_drvdata(dev); @@ -46,25 +46,14 @@ static int ade7753_spi_write_reg_16(struct device *dev, u16 value) { int ret; - struct spi_message msg; struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ade7753_state *st = iio_dev_get_devdata(indio_dev); - struct spi_transfer xfers[] = { - { - .tx_buf = st->tx, - .bits_per_word = 8, - .len = 3, - } - }; mutex_lock(&st->buf_lock); st->tx[0] = ADE7753_WRITE_REG(reg_address); st->tx[1] = (value >> 8) & 0xFF; st->tx[2] = value & 0xFF; - - spi_message_init(&msg); - spi_message_add_tail(xfers, &msg); - ret = spi_sync(st->us, &msg); + ret = spi_write(st->us, st->tx, 3); mutex_unlock(&st->buf_lock); return ret; @@ -74,73 +63,40 @@ static int ade7753_spi_read_reg_8(struct device *dev, u8 reg_address, u8 *val) { - struct spi_message msg; struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ade7753_state *st = iio_dev_get_devdata(indio_dev); - int ret; - struct spi_transfer xfers[] = { - { - .tx_buf = st->tx, - .rx_buf = st->rx, - .bits_per_word = 8, - .len = 2, - }, - }; - - mutex_lock(&st->buf_lock); - st->tx[0] = ADE7753_READ_REG(reg_address); - st->tx[1] = 0; + ssize_t ret; - spi_message_init(&msg); - spi_message_add_tail(xfers, &msg); - ret = spi_sync(st->us, &msg); - if (ret) { + ret = spi_w8r8(st->us, ADE7753_READ_REG(reg_address)); + if (ret < 0) { dev_err(&st->us->dev, "problem when reading 8 bit register 0x%02X", reg_address); - goto error_ret; + return ret; } - *val = st->rx[1]; + *val = ret; -error_ret: - mutex_unlock(&st->buf_lock); - return ret; + return 0; } static int ade7753_spi_read_reg_16(struct device *dev, u8 reg_address, u16 *val) { - struct spi_message msg; struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ade7753_state *st = iio_dev_get_devdata(indio_dev); - int ret; - struct spi_transfer xfers[] = { - { - .tx_buf = st->tx, - .rx_buf = st->rx, - .bits_per_word = 8, - .len = 3, - }, - }; - - mutex_lock(&st->buf_lock); - st->tx[0] = ADE7753_READ_REG(reg_address); - st->tx[1] = 0; - st->tx[2] = 0; + ssize_t ret; - spi_message_init(&msg); - spi_message_add_tail(xfers, &msg); - ret = spi_sync(st->us, &msg); - if (ret) { + ret = spi_w8r16(st->us, ADE7753_READ_REG(reg_address)); + if (ret < 0) { dev_err(&st->us->dev, "problem when reading 16 bit register 0x%02X", - reg_address); - goto error_ret; + reg_address); + return ret; } - *val = (st->rx[1] << 8) | st->rx[2]; -error_ret: - mutex_unlock(&st->buf_lock); - return ret; + *val = ret; + *val = be16_to_cpup(val); + + return 0; } static int ade7753_spi_read_reg_24(struct device *dev, @@ -154,27 +110,28 @@ static int ade7753_spi_read_reg_24(struct device *dev, struct spi_transfer xfers[] = { { .tx_buf = st->tx, - .rx_buf = st->rx, .bits_per_word = 8, - .len = 4, - }, + .len = 1, + }, { + .rx_buf = st->tx, + .bits_per_word = 8, + .len = 3, + } }; mutex_lock(&st->buf_lock); st->tx[0] = ADE7753_READ_REG(reg_address); - st->tx[1] = 0; - st->tx[2] = 0; - st->tx[3] = 0; spi_message_init(&msg); - spi_message_add_tail(xfers, &msg); + spi_message_add_tail(&xfers[0], &msg); + spi_message_add_tail(&xfers[1], &msg); ret = spi_sync(st->us, &msg); if (ret) { dev_err(&st->us->dev, "problem when reading 24 bit register 0x%02X", reg_address); goto error_ret; } - *val = (st->rx[1] << 16) | (st->rx[2] << 8) | st->rx[3]; + *val = (st->rx[0] << 16) | (st->rx[1] << 8) | st->rx[2]; error_ret: mutex_unlock(&st->buf_lock); @@ -186,7 +143,7 @@ static ssize_t ade7753_read_8bit(struct device *dev, char *buf) { int ret; - u8 val = 0; + u8 val; struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); ret = ade7753_spi_read_reg_8(dev, this_attr->address, &val); @@ -201,7 +158,7 @@ static ssize_t ade7753_read_16bit(struct device *dev, char *buf) { int ret; - u16 val = 0; + u16 val; struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); ret = ade7753_spi_read_reg_16(dev, this_attr->address, &val); @@ -216,14 +173,14 @@ static ssize_t ade7753_read_24bit(struct device *dev, char *buf) { int ret; - u32 val = 0; + u32 val; struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); ret = ade7753_spi_read_reg_24(dev, this_attr->address, &val); if (ret) return ret; - return sprintf(buf, "%u\n", val & 0xFFFFFF); + return sprintf(buf, "%u\n", val); } static ssize_t ade7753_write_8bit(struct device *dev, @@ -264,17 +221,12 @@ error_ret: static int ade7753_reset(struct device *dev) { - int ret; u16 val; - ade7753_spi_read_reg_16(dev, - ADE7753_MODE, - &val); + + ade7753_spi_read_reg_16(dev, ADE7753_MODE, &val); val |= 1 << 6; /* Software Chip Reset */ - ret = ade7753_spi_write_reg_16(dev, - ADE7753_MODE, - val); - return ret; + return ade7753_spi_write_reg_16(dev, ADE7753_MODE, val); } static ssize_t ade7753_write_reset(struct device *dev, @@ -401,27 +353,20 @@ static int ade7753_set_irq(struct device *dev, bool enable) irqen &= ~(1 << 3); ret = ade7753_spi_write_reg_8(dev, ADE7753_IRQEN, irqen); - if (ret) - goto error_ret; error_ret: return ret; } /* Power down the device */ -int ade7753_stop_device(struct device *dev) +static int ade7753_stop_device(struct device *dev) { - int ret; u16 val; - ade7753_spi_read_reg_16(dev, - ADE7753_MODE, - &val); + + ade7753_spi_read_reg_16(dev, ADE7753_MODE, &val); val |= 1 << 4; /* AD converters can be turned off */ - ret = ade7753_spi_write_reg_16(dev, - ADE7753_MODE, - val); - return ret; + return ade7753_spi_write_reg_16(dev, ADE7753_MODE, val); } static int ade7753_initial_setup(struct ade7753_state *st) @@ -454,16 +399,14 @@ static ssize_t ade7753_read_frequency(struct device *dev, int ret, len = 0; u8 t; int sps; - ret = ade7753_spi_read_reg_8(dev, - ADE7753_MODE, - &t); + ret = ade7753_spi_read_reg_8(dev, ADE7753_MODE, &t); if (ret) return ret; t = (t >> 11) & 0x3; sps = 27900 / (1 + t); - len = sprintf(buf, "%d SPS\n", sps); + len = sprintf(buf, "%d\n", sps); return len; } @@ -493,24 +436,21 @@ static ssize_t ade7753_write_frequency(struct device *dev, else st->us->max_speed_hz = ADE7753_SPI_FAST; - ret = ade7753_spi_read_reg_16(dev, - ADE7753_MODE, - ®); + ret = ade7753_spi_read_reg_16(dev, ADE7753_MODE, ®); if (ret) goto out; reg &= ~(3 << 11); reg |= t << 11; - ret = ade7753_spi_write_reg_16(dev, - ADE7753_MODE, - reg); + ret = ade7753_spi_write_reg_16(dev, ADE7753_MODE, reg); out: mutex_unlock(&indio_dev->mlock); return ret ? ret : len; } + static IIO_DEV_ATTR_TEMP_RAW(ade7753_read_8bit); static IIO_CONST_ATTR(temp_offset, "-25 C"); static IIO_CONST_ATTR(temp_scale, "0.67 C"); @@ -525,14 +465,6 @@ static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("27900 14000 7000 3500"); static IIO_CONST_ATTR(name, "ade7753"); -static struct attribute *ade7753_event_attributes[] = { - NULL -}; - -static struct attribute_group ade7753_event_attribute_group = { - .attrs = ade7753_event_attributes, -}; - static struct attribute *ade7753_attributes[] = { &iio_dev_attr_temp_raw.dev_attr.attr, &iio_const_attr_temp_offset.dev_attr.attr, @@ -607,58 +539,22 @@ static int __devinit ade7753_probe(struct spi_device *spi) } st->indio_dev->dev.parent = &spi->dev; - st->indio_dev->num_interrupt_lines = 1; - st->indio_dev->event_attrs = &ade7753_event_attribute_group; st->indio_dev->attrs = &ade7753_attribute_group; st->indio_dev->dev_data = (void *)(st); st->indio_dev->driver_module = THIS_MODULE; st->indio_dev->modes = INDIO_DIRECT_MODE; - ret = ade7753_configure_ring(st->indio_dev); - if (ret) - goto error_free_dev; - ret = iio_device_register(st->indio_dev); if (ret) - goto error_unreg_ring_funcs; + goto error_free_dev; regdone = 1; - ret = ade7753_initialize_ring(st->indio_dev->ring); - if (ret) { - printk(KERN_ERR "failed to initialize the ring\n"); - goto error_unreg_ring_funcs; - } - - if (spi->irq) { - ret = iio_register_interrupt_line(spi->irq, - st->indio_dev, - 0, - IRQF_TRIGGER_FALLING, - "ade7753"); - if (ret) - goto error_uninitialize_ring; - - ret = ade7753_probe_trigger(st->indio_dev); - if (ret) - goto error_unregister_line; - } - /* Get the device into a sane initial state */ ret = ade7753_initial_setup(st); if (ret) - goto error_remove_trigger; + goto error_free_dev; return 0; -error_remove_trigger: - if (st->indio_dev->modes & INDIO_RING_TRIGGERED) - ade7753_remove_trigger(st->indio_dev); -error_unregister_line: - if (st->indio_dev->modes & INDIO_RING_TRIGGERED) - iio_unregister_interrupt_line(st->indio_dev, 0); -error_uninitialize_ring: - ade7753_uninitialize_ring(st->indio_dev->ring); -error_unreg_ring_funcs: - ade7753_unconfigure_ring(st->indio_dev); error_free_dev: if (regdone) iio_device_unregister(st->indio_dev); @@ -685,14 +581,6 @@ static int ade7753_remove(struct spi_device *spi) if (ret) goto err_ret; - flush_scheduled_work(); - - ade7753_remove_trigger(indio_dev); - if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) - iio_unregister_interrupt_line(indio_dev, 0); - - ade7753_uninitialize_ring(indio_dev->ring); - ade7753_unconfigure_ring(indio_dev); iio_device_unregister(indio_dev); kfree(st->tx); kfree(st->rx); @@ -726,5 +614,5 @@ static __exit void ade7753_exit(void) module_exit(ade7753_exit); MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); -MODULE_DESCRIPTION("Analog Devices ADE7753/6 Single-Phase Multifunction Metering IC Driver"); +MODULE_DESCRIPTION("Analog Devices ADE7753/6 Single-Phase Multifunction Meter"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/meter/ade7753.h b/drivers/staging/iio/meter/ade7753.h index a3722b8c90fa..70dabae6efe9 100644 --- a/drivers/staging/iio/meter/ade7753.h +++ b/drivers/staging/iio/meter/ade7753.h @@ -60,81 +60,17 @@ /** * struct ade7753_state - device instance specific data * @us: actual spi_device - * @work_trigger_to_ring: bh for triggered event handling - * @inter: used to check if new interrupt has been triggered - * @last_timestamp: passing timestamp from th to bh of interrupt handler * @indio_dev: industrial I/O device structure - * @trig: data ready trigger registered with iio * @tx: transmit buffer * @rx: recieve buffer * @buf_lock: mutex to protect tx and rx **/ struct ade7753_state { struct spi_device *us; - struct work_struct work_trigger_to_ring; - s64 last_timestamp; struct iio_dev *indio_dev; - struct iio_trigger *trig; u8 *tx; u8 *rx; struct mutex buf_lock; }; -#if defined(CONFIG_IIO_RING_BUFFER) && defined(THIS_HAS_RING_BUFFER_SUPPORT) -/* At the moment triggers are only used for ring buffer - * filling. This may change! - */ - -enum ade7753_scan { - ADE7753_SCAN_ACTIVE_POWER, - ADE7753_SCAN_CH1, - ADE7753_SCAN_CH2, -}; - -void ade7753_remove_trigger(struct iio_dev *indio_dev); -int ade7753_probe_trigger(struct iio_dev *indio_dev); - -ssize_t ade7753_read_data_from_ring(struct device *dev, - struct device_attribute *attr, - char *buf); - - -int ade7753_configure_ring(struct iio_dev *indio_dev); -void ade7753_unconfigure_ring(struct iio_dev *indio_dev); - -int ade7753_initialize_ring(struct iio_ring_buffer *ring); -void ade7753_uninitialize_ring(struct iio_ring_buffer *ring); -#else /* CONFIG_IIO_RING_BUFFER */ - -static inline void ade7753_remove_trigger(struct iio_dev *indio_dev) -{ -} -static inline int ade7753_probe_trigger(struct iio_dev *indio_dev) -{ - return 0; -} - -static inline ssize_t -ade7753_read_data_from_ring(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - return 0; -} - -static int ade7753_configure_ring(struct iio_dev *indio_dev) -{ - return 0; -} -static inline void ade7753_unconfigure_ring(struct iio_dev *indio_dev) -{ -} -static inline int ade7753_initialize_ring(struct iio_ring_buffer *ring) -{ - return 0; -} -static inline void ade7753_uninitialize_ring(struct iio_ring_buffer *ring) -{ -} -#endif /* CONFIG_IIO_RING_BUFFER */ #endif