From: Franky Lin Date: Fri, 12 Aug 2011 13:34:57 +0000 (+0200) Subject: staging: brcm80211: remove dead code from dhd_sdio.c X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=72b1f6c382bc2b7a7180c4a97563405ec4e7ad83;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git staging: brcm80211: remove dead code from dhd_sdio.c Code cleanup for brcmfmac Reviewed-by: Arend van Spriel Reviewed-by: Roland Vossen Signed-off-by: Arend van Spriel Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c index b61b9555fab4..cd58ef847aa8 100644 --- a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c @@ -38,28 +38,6 @@ #ifdef BCMDBG /* ARM trap handling */ - -/* Trap types defined by ARM (see arminc.h) */ - -#if defined(__ARM_ARCH_4T__) -#define MAX_TRAP_TYPE (TR_FIQ + 1) -#elif defined(__ARM_ARCH_7M__) -#define MAX_TRAP_TYPE (TR_ISR + ARMCM3_NUMINTS) -#endif /* __ARM_ARCH_7M__ */ - -/* The trap structure is defined here as offsets for assembly */ -#define TR_TYPE 0x00 -#define TR_EPC 0x04 -#define TR_CPSR 0x08 -#define TR_SPSR 0x0c -#define TR_REGS 0x10 -#define TR_REG(n) (TR_REGS + (n) * 4) -#define TR_SP TR_REG(13) -#define TR_LR TR_REG(14) -#define TR_PC TR_REG(15) - -#define TRAP_T_SIZE 80 - struct brcmf_trap { u32 type; u32 epc; @@ -620,7 +598,6 @@ struct brcmf_bus { u32 ramsize; /* Size of RAM in SOCRAM (bytes) */ u32 orig_ramsize; /* Size of RAM in SOCRAM (bytes) */ - u32 bus; /* gSPI or SDIO bus */ u32 hostintmask; /* Copy of Host Interrupt Mask */ u32 intstatus; /* Intstatus bits (events) pending */ bool dpc_sched; /* Indicates DPC schedule (intrpt rcvd) */ @@ -801,8 +778,6 @@ struct sbconfig { #define CLK_PENDING 2 /* Not used yet */ #define CLK_AVAIL 3 -#define BRCMF_NOPMU(brcmf) (false) - #ifdef BCMDBG static int qcount[NUMPRIO]; static int tx_packets[NUMPRIO]; @@ -862,12 +837,9 @@ module_param(brcmf_dongle_memsize, int, 0); static bool brcmf_alignctl; -static bool sd1idle; - static bool retrydata; #define RETRYCHAN(chan) (((chan) == SDPCM_EVENT_CHANNEL) || retrydata) -static const uint watermark = 8; static const uint firstread = BRCMF_FIRSTREAD; /* Retry count for register access failures */ @@ -939,8 +911,6 @@ w_sdreg32(struct brcmf_bus *bus, u32 regval, u32 reg_offset, u32 *retryvar) } } -#define BRCMF_BUS SDIO_BUS - #define PKT_AVAILABLE() (intstatus & I_HMB_FRAME_IND) #define HOSTINTMASK (I_HMB_SW_MASK | I_CHIPACTIVE) @@ -1012,7 +982,7 @@ static int brcmf_sdbrcm_ioctl_resp_wake(struct brcmf_bus *bus); */ static void brcmf_sdbrcm_pktfree2(struct brcmf_bus *bus, struct sk_buff *pkt) { - if ((bus->bus != SPI_BUS) || bus->usebufpool) + if (bus->usebufpool) brcmu_pkt_buf_free_skb(pkt); } @@ -1890,18 +1860,15 @@ enum { IOV_ALIGNCTL, IOV_SDALIGN, IOV_DEVRESET, - IOV_CPU, #ifdef SDTEST IOV_PKTGEN, IOV_EXTLOOP, #endif /* SDTEST */ - IOV_SPROM, IOV_TXBOUND, IOV_RXBOUND, IOV_TXMINMAX, IOV_IDLETIME, IOV_IDLECLOCK, - IOV_SD1IDLE, IOV_SLEEP, IOV_WDTICK, IOV_IOCTLTIMEOUT, @@ -1914,7 +1881,6 @@ const struct brcmu_iovar brcmf_sdio_iovars[] = { {"pollrate", IOV_POLLRATE, 0, IOVT_UINT32, 0}, {"idletime", IOV_IDLETIME, 0, IOVT_INT32, 0}, {"idleclock", IOV_IDLECLOCK, 0, IOVT_INT32, 0}, - {"sd1idle", IOV_SD1IDLE, 0, IOVT_BOOL, 0}, {"membytes", IOV_MEMBYTES, 0, IOVT_BUFFER, 2 * sizeof(int)}, {"memsize", IOV_MEMSIZE, 0, IOVT_UINT32, 0}, {"download", IOV_DOWNLOAD, 0, IOVT_BOOL, 0}, @@ -1946,8 +1912,6 @@ const struct brcmu_iovar brcmf_sdio_iovars[] = { , {"txminmax", IOV_TXMINMAX, 0, IOVT_UINT32, 0} , - {"cpu", IOV_CPU, 0, IOVT_BOOL, 0} - , {"checkdied", IOV_CHECKDIED, 0, IOVT_BUFFER, 0} , #endif /* BCMDBG */ @@ -2636,15 +2600,6 @@ static int brcmf_sdbrcm_doiovar(struct brcmf_bus *bus, bus->idleclock = int_val; break; - case IOV_GVAL(IOV_SD1IDLE): - int_val = (s32) sd1idle; - memcpy(arg, &int_val, val_size); - break; - - case IOV_SVAL(IOV_SD1IDLE): - sd1idle = bool_val; - break; - case IOV_SVAL(IOV_MEMBYTES): case IOV_GVAL(IOV_MEMBYTES): { @@ -3370,7 +3325,7 @@ int brcmf_sdbrcm_bus_init(struct brcmf_pub *drvr, bool enforce_mutex) offsetof(struct sdpcmd_regs, hostintmask), &retries); brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_WATERMARK, (u8) watermark, &err); + SBSDIO_WATERMARK, 8, &err); /* Set bus state according to enable result */ drvr->busstate = BRCMF_BUS_DATA; @@ -3484,10 +3439,6 @@ brcmf_sdbrcm_read_control(struct brcmf_bus *bus, u8 *hdr, uint len, uint doff) BRCMF_TRACE(("%s: Enter\n", __func__)); - /* Control data already received in aligned rxctl */ - if ((bus->bus == SPI_BUS) && (!bus->usebufpool)) - goto gotpkt; - /* Set rxctl for frame (w/optional alignment) */ bus->rxctl = bus->rxbuf; if (brcmf_alignctl) { @@ -3503,12 +3454,6 @@ brcmf_sdbrcm_read_control(struct brcmf_bus *bus, u8 *hdr, uint len, uint doff) if (len <= firstread) goto gotpkt; - /* Copy the full data pkt in gSPI case and process ioctl. */ - if (bus->bus == SPI_BUS) { - memcpy(bus->rxctl, hdr, len); - goto gotpkt; - } - /* Raise rdlen to next SDIO block to avoid tail command */ rdlen = len - firstread; if (bus->roundup && bus->blocksize && (rdlen > bus->blocksize)) { @@ -4039,26 +3984,22 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished) u16 nextlen = bus->nextlen; bus->nextlen = 0; - if (bus->bus == SPI_BUS) { - rdlen = len = nextlen; - } else { - rdlen = len = nextlen << 4; - - /* Pad read to blocksize for efficiency */ - if (bus->roundup && bus->blocksize - && (rdlen > bus->blocksize)) { - pad = - bus->blocksize - - (rdlen % bus->blocksize); - if ((pad <= bus->roundup) - && (pad < bus->blocksize) - && ((rdlen + pad + firstread) < - MAX_RX_DATASZ)) - rdlen += pad; - } else if (rdlen % BRCMF_SDALIGN) { - rdlen += BRCMF_SDALIGN - - (rdlen % BRCMF_SDALIGN); - } + rdlen = len = nextlen << 4; + + /* Pad read to blocksize for efficiency */ + if (bus->roundup && bus->blocksize + && (rdlen > bus->blocksize)) { + pad = + bus->blocksize - + (rdlen % bus->blocksize); + if ((pad <= bus->roundup) + && (pad < bus->blocksize) + && ((rdlen + pad + firstread) < + MAX_RX_DATASZ)) + rdlen += pad; + } else if (rdlen % BRCMF_SDALIGN) { + rdlen += BRCMF_SDALIGN - + (rdlen % BRCMF_SDALIGN); } /* We use bus->rxctl buffer in WinXP for initial @@ -4074,60 +4015,15 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished) /* Allocate a packet buffer */ pkt = brcmu_pkt_buf_get_skb(rdlen + BRCMF_SDALIGN); if (!pkt) { - if (bus->bus == SPI_BUS) { - bus->usebufpool = false; - bus->rxctl = bus->rxbuf; - if (brcmf_alignctl) { - bus->rxctl += firstread; - pad = ((unsigned long)bus->rxctl - % BRCMF_SDALIGN); - if (pad) - bus->rxctl += - (BRCMF_SDALIGN - pad); - bus->rxctl -= firstread; - } - rxbuf = bus->rxctl; - /* Read the entire frame */ - sdret = brcmf_sdcard_recv_buf( - bus->sdiodev, - brcmf_sdcard_cur_sbwad( - bus->sdiodev), - SDIO_FUNC_2, F2SYNC, - rxbuf, rdlen, - NULL, NULL, NULL); - bus->f2rxdata++; - - /* Control frame failures need - retransmission */ - if (sdret < 0) { - BRCMF_ERROR(("%s: read %d " - "control bytes " - "failed: %d\n", - __func__, - rdlen, sdret)); - /* dhd.rx_ctlerrs is higher */ - bus->rxc_errors++; - brcmf_sdbrcm_rxfail(bus, true, - (bus->bus == - SPI_BUS) ? false - : true); - continue; - } - } else { - /* Give up on data, - request rtx of events */ - BRCMF_ERROR(("%s (nextlen): " - "brcmu_pkt_buf_get_skb " - "failed:" - " len %d rdlen %d expected" - " rxseq %d\n", __func__, - len, rdlen, rxseq)); - continue; - } + /* Give up on data, request rtx of events */ + BRCMF_ERROR(("%s (nextlen): " + "brcmu_pkt_buf_get_skb " + "failed:" + " len %d rdlen %d expected" + " rxseq %d\n", __func__, + len, rdlen, rxseq)); + continue; } else { - if (bus->bus == SPI_BUS) - bus->usebufpool = true; - PKTALIGN(pkt, rdlen, BRCMF_SDALIGN); rxbuf = (u8 *) (pkt->data); /* Read the entire frame */ @@ -4149,10 +4045,7 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished) * Don't attempt NAK for * gSPI */ - brcmf_sdbrcm_rxfail(bus, true, - (bus->bus == - SPI_BUS) ? false : - true); + brcmf_sdbrcm_rxfail(bus, true, true); continue; } } @@ -4202,8 +4095,7 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished) "expected rxseq %d\n", __func__, nextlen, len, roundup(len, 16), rxseq)); - brcmf_sdbrcm_rxfail(bus, true, - bus->bus != SPI_BUS); + brcmf_sdbrcm_rxfail(bus, true, true); brcmf_sdbrcm_pktfree2(bus, pkt); continue; } @@ -4275,29 +4167,16 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished) #endif if (chan == SDPCM_CONTROL_CHANNEL) { - if (bus->bus == SPI_BUS) { - brcmf_sdbrcm_read_control(bus, rxbuf, - len, doff); - } else { - BRCMF_ERROR(("%s (nextlen): readahead" - " on control packet %d?\n", - __func__, seq)); - /* Force retry w/normal header read */ - bus->nextlen = 0; - brcmf_sdbrcm_rxfail(bus, false, true); - } + BRCMF_ERROR(("%s (nextlen): readahead" + " on control packet %d?\n", + __func__, seq)); + /* Force retry w/normal header read */ + bus->nextlen = 0; + brcmf_sdbrcm_rxfail(bus, false, true); brcmf_sdbrcm_pktfree2(bus, pkt); continue; } - if ((bus->bus == SPI_BUS) && !bus->usebufpool) { - BRCMF_ERROR(("Received %d bytes on %d channel." - " Running out of " "rx pktbuf's or" - " not yet malloced.\n", - len, chan)); - continue; - } - /* Validate data offset */ if ((doff < SDPCM_HDRLEN) || (doff > len)) { BRCMF_ERROR(("%s (nextlen): bad data offset %d:" @@ -4311,9 +4190,6 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished) /* All done with this one -- now deliver the packet */ goto deliver; } - /* gSPI frames should not be handled in fractions */ - if (bus->bus == SPI_BUS) - break; /* Read frame header (hardware and software) */ sdret = brcmf_sdcard_recv_buf(bus->sdiodev, @@ -5384,7 +5260,6 @@ void *brcmf_sdbrcm_probe(u16 bus_no, u16 slot, u16 func, uint bustype, brcmf_txbound = BRCMF_TXBOUND; brcmf_rxbound = BRCMF_RXBOUND; brcmf_alignctl = true; - sd1idle = true; brcmf_readahead = true; retrydata = false; brcmf_dongle_memsize = 0; @@ -5408,7 +5283,6 @@ void *brcmf_sdbrcm_probe(u16 bus_no, u16 slot, u16 func, uint bustype, } bus->sdiodev = sdiodev; sdiodev->bus = bus; - bus->bus = BRCMF_BUS; bus->tx_seq = SDPCM_SEQUENCE_WRAP - 1; bus->usebufpool = false; /* Use bufpool if allocated, else use locally malloced rxbuf */ @@ -5578,22 +5452,20 @@ brcmf_sdbrcm_probe_attach(struct brcmf_bus *bus, u32 regsva) brcmf_sdbrcm_sdiod_drive_strength_init(bus, brcmf_sdiod_drive_strength); /* Get info on the ARM and SOCRAM cores... */ - if (!BRCMF_NOPMU(bus)) { - brcmf_sdcard_reg_read(bus->sdiodev, - CORE_SB(bus->ci->armcorebase, sbidhigh), 4); - bus->orig_ramsize = bus->ci->ramsize; - if (!(bus->orig_ramsize)) { - BRCMF_ERROR(("%s: failed to find SOCRAM memory!\n", - __func__)); - goto fail; - } - bus->ramsize = bus->orig_ramsize; - if (brcmf_dongle_memsize) - brcmf_sdbrcm_setmemsize(bus, brcmf_dongle_memsize); - - BRCMF_ERROR(("DHD: dongle ram size is set to %d(orig %d)\n", - bus->ramsize, bus->orig_ramsize)); + brcmf_sdcard_reg_read(bus->sdiodev, + CORE_SB(bus->ci->armcorebase, sbidhigh), 4); + bus->orig_ramsize = bus->ci->ramsize; + if (!(bus->orig_ramsize)) { + BRCMF_ERROR(("%s: failed to find SOCRAM memory!\n", + __func__)); + goto fail; } + bus->ramsize = bus->orig_ramsize; + if (brcmf_dongle_memsize) + brcmf_sdbrcm_setmemsize(bus, brcmf_dongle_memsize); + + BRCMF_ERROR(("DHD: dongle ram size is set to %d(orig %d)\n", + bus->ramsize, bus->orig_ramsize)); /* Set core control so an SDIO reset does a backplane reset */ reg_addr = bus->ci->buscorebase +