From: Sudeep Holla Date: Wed, 21 Oct 2015 10:09:59 +0000 (+0100) Subject: Documentation: devicetree: fix reference to legacy wakeup properties X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=71a0151c5c82595b58c21b4dd5c07482d8a3d554;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git Documentation: devicetree: fix reference to legacy wakeup properties This patch marks all the reference to the legacy wakeup bindings and replaces them with the standard "wakeup-source" property. All these legacy property are also listed under a separate section in the generic wakeup-source binding document. Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Signed-off-by: Sudeep Holla Signed-off-by: Rob Herring --- diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt index 6831d025ec24..adeca34c5a33 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt @@ -441,7 +441,7 @@ EXAMPLE: regmap = <&snvs>; interrupts = <0 4 0x4> linux,keycode = <116>; /* KEY_POWER */ - wakeup; + wakeup-source; }; ===================================================================== @@ -530,7 +530,7 @@ FULL EXAMPLE regmap = <&sec_mon>; interrupts = <0 4 0x4>; linux,keycode = <116>; /* KEY_POWER */ - wakeup; + wakeup-source; }; }; diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt index df8b1279491d..33a1638b61d6 100644 --- a/Documentation/devicetree/bindings/input/ads7846.txt +++ b/Documentation/devicetree/bindings/input/ads7846.txt @@ -65,6 +65,7 @@ Optional properties: pendown-gpio GPIO handle describing the pin the !PENIRQ line is connected to. wakeup-source use any event on touchscreen as wakeup event. + (Legacy property support: "linux,wakeup") Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC:: @@ -86,6 +87,6 @@ Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC:: ti,x-plate-ohms = /bits/ 16 <40>; ti,pressure-max = /bits/ 16 <255>; - linux,wakeup; + wakeup-source; }; }; diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt index 5b91f5a3bd5c..d698475a9262 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt +++ b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt @@ -21,6 +21,7 @@ Optional subnode-properties: - debounce-interval: Debouncing interval time in milliseconds. If not specified defaults to 5. - wakeup-source: Boolean, button can wake-up the system. + (Legacy property supported: "gpio-key,wakeup") Example nodes: diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt index 072bf7573c37..cf1333d1dd52 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys.txt +++ b/Documentation/devicetree/bindings/input/gpio-keys.txt @@ -24,6 +24,7 @@ Optional subnode-properties: - debounce-interval: Debouncing interval time in milliseconds. If not specified defaults to 5. - wakeup-source: Boolean, button can wake-up the system. + (Legacy property supported: "gpio-key,wakeup") - linux,can-disable: Boolean, indicates that button is connected to dedicated (not shared) interrupt which can be disabled to suppress events from the button. diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt index 4d86059c370c..d0ea09ba249f 100644 --- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt +++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt @@ -20,6 +20,7 @@ Required Properties: Optional Properties: - linux,no-autorepeat: do no enable autorepeat feature. - wakeup-source: use any event on keypad as wakeup event. + (Legacy property supported: "linux,wakeup") - debounce-delay-ms: debounce interval in milliseconds - col-scan-delay-us: delay, measured in microseconds, that is needed before we can scan keypad after activating column gpio diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt index 0382b8bd69c6..1faa7292e21f 100644 --- a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt +++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt @@ -29,7 +29,8 @@ matrix-keyboard bindings: - nvidia,debounce-delay-ms: delay in milliseconds per row scan for debouncing - nvidia,repeat-delay-ms: delay in milliseconds before repeat starts - nvidia,ghost-filter: enable ghost filtering for this device -- nvidia,wakeup-source: configure keyboard as a wakeup source for suspend/resume +- wakeup-source: configure keyboard as a wakeup source for suspend/resume + (Legacy property supported: "nvidia,wakeup-source") Example: diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt index ee6215681182..4a9dc6ba96b1 100644 --- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt @@ -37,6 +37,7 @@ PROPERTIES Usage: optional Value type: Definition: use any event on keypad as wakeup event. + (Legacy property supported: "linux,keypad-wakeup") - keypad,num-rows: Usage: required diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt index 863e77f619dc..5305e74e5742 100644 --- a/Documentation/devicetree/bindings/input/samsung-keypad.txt +++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt @@ -38,6 +38,7 @@ Required Board Specific Properties: Optional Properties: - wakeup-source: use any event on keypad as wakeup event. + (Legacy property supported: "linux,input-wakeup") Optional Properties specific to linux: - linux,keypad-no-autorepeat: do no enable autorepeat feature. @@ -51,7 +52,7 @@ Example: samsung,keypad-num-rows = <2>; samsung,keypad-num-columns = <8>; linux,input-no-autorepeat; - linux,input-wakeup; + wakeup-source; pinctrl-names = "default"; pinctrl-0 = <&keypad_rows &keypad_columns>; diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt index 37bf7f1aa70a..23fc2f21f5a4 100644 --- a/Documentation/devicetree/bindings/mfd/tc3589x.txt +++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt @@ -56,6 +56,7 @@ Optional nodes: bindings/input/matrix-keymap.txt - linux,no-autorepeat: do no enable autorepeat feature. - wakeup-source: use any event on keypad as wakeup event. + (Legacy property supported: "linux,wakeup") Example: diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 0384fc3f64e8..a88f5dc775bd 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -67,7 +67,8 @@ polarity is in effect. Optional SDIO properties: - keep-power-in-suspend: Preserves card power during a suspend/resume cycle -- enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion +- wakeup-source: Enables wake up of host system on SDIO IRQ assertion + (Legacy property supported: "enable-sdio-wakeup") MMC power sequences: @@ -117,7 +118,7 @@ sdhci@ab000000 { wp-gpios = <&gpio 70 0>; max-frequency = <50000000>; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; mmc-pwrseq = <&sdhci0_pwrseq> } diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt index 501c39ceae79..cf83e0940302 100644 --- a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt +++ b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt @@ -5,7 +5,7 @@ consisting of a compatible field, an address and possibly an interrupt line). Nonetheless, it also supports an option boolean property -("isil,irq2-can-wakeup-machine") to handle the specific use-case found +("wakeup-source") to handle the specific use-case found on at least three in-tree users of the chip (NETGEAR ReadyNAS 102, 104 and 2120 ARM-based NAS); On those devices, the IRQ#2 pin of the chip (associated with the alarm supported by the driver) is not connected @@ -22,9 +22,9 @@ Required properties supported by the device: Optional properties: - - "isil,irq2-can-wakeup-machine": mark the chip as a wakeup source, - independently of the availability of an IRQ line connected to the - SoC. + - "wakeup-source": mark the chip as a wakeup source, independently of + the availability of an IRQ line connected to the SoC. + (Legacy property supported: "isil,irq2-can-wakeup-machine") - "interrupt-parent", "interrupts": for passing the interrupt line of the SoC connected to IRQ#2 of the RTC chip. @@ -74,5 +74,5 @@ PMIC, allowing the device to be started based on configured alarm: isl12057: isl12057@68 { compatible = "isil,isl12057"; reg = <0x68>; - isil,irq2-can-wakeup-machine; + wakeup-source; }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-opal.txt b/Documentation/devicetree/bindings/rtc/rtc-opal.txt index af87e5ecac54..a1734e5cb75b 100644 --- a/Documentation/devicetree/bindings/rtc/rtc-opal.txt +++ b/Documentation/devicetree/bindings/rtc/rtc-opal.txt @@ -5,12 +5,13 @@ Required properties: - comapatible: Should be "ibm,opal-rtc" Optional properties: -- has-tpo: Decides if the wakeup is supported or not. +- wakeup-source: Decides if the wakeup is supported or not + (Legacy property supported: "has-tpo") Example: rtc { compatible = "ibm,opal-rtc"; - has-tpo; + wakeup-source; phandle = <0x10000029>; linux,phandle = <0x10000029>; };