From: Prarit Bhargava Date: Mon, 15 Jun 2015 17:43:29 +0000 (-0400) Subject: intel_pstate: Fix overflow in busy_scaled due to long delay X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=7180dddf7c32c49975c7e7babf2b60ed450cb760;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git intel_pstate: Fix overflow in busy_scaled due to long delay The kernel may delay interrupts for a long time which can result in timers being delayed. If this occurs the intel_pstate driver will crash with a divide by zero error: divide error: 0000 [#1] SMP Modules linked in: btrfs zlib_deflate raid6_pq xor msdos ext4 mbcache jbd2 binfmt_misc arc4 md4 nls_utf8 cifs dns_resolver tcp_lp bnep bluetooth rfkill fuse dm_service_time iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ftp ip6t_rpfilter ip6t_REJECT ipt_REJECT xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter ip_tables intel_powerclamp coretemp vfat fat kvm_intel iTCO_wdt iTCO_vendor_support ipmi_devintf sr_mod kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel cdc_ether lrw usbnet cdrom mii gf128mul glue_helper ablk_helper cryptd lpc_ich mfd_core pcspkr sb_edac edac_core ipmi_si ipmi_msghandler ioatdma wmi shpchp acpi_pad nfsd auth_rpcgss nfs_acl lockd uinput dm_multipath sunrpc xfs libcrc32c usb_storage sd_mod crc_t10dif crct10dif_common ixgbe mgag200 syscopyarea sysfillrect sysimgblt mdio drm_kms_helper ttm igb drm ptp pps_core dca i2c_algo_bit megaraid_sas i2c_core dm_mirror dm_region_hash dm_log dm_mod CPU: 113 PID: 0 Comm: swapper/113 Tainted: G W -------------- 3.10.0-229.1.2.el7.x86_64 #1 Hardware name: IBM x3950 X6 -[3837AC2]-/00FN827, BIOS -[A8E112BUS-1.00]- 08/27/2014 task: ffff880fe8abe660 ti: ffff880fe8ae4000 task.ti: ffff880fe8ae4000 RIP: 0010:[] [] intel_pstate_timer_func+0x179/0x3d0 RSP: 0018:ffff883fff4e3db8 EFLAGS: 00010206 RAX: 0000000027100000 RBX: ffff883fe6965100 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000010 RDI: 000000002e53632d RBP: ffff883fff4e3e20 R08: 000e6f69a5a125c0 R09: ffff883fe84ec001 R10: 0000000000000002 R11: 0000000000000005 R12: 00000000000049f5 R13: 0000000000271000 R14: 00000000000049f5 R15: 0000000000000246 FS: 0000000000000000(0000) GS:ffff883fff4e0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7668601000 CR3: 000000000190a000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff883fff4e3e58 ffffffff81099dc1 0000000000000086 0000000000000071 ffff883fff4f3680 0000000000000071 fbdc8a965e33afee ffffffff810b69dd ffff883fe84ec000 ffff883fe6965108 0000000000000100 ffffffff814a9100 Call Trace: [] ? run_posix_cpu_timers+0x51/0x840 [] ? trigger_load_balance+0x5d/0x200 [] ? pid_param_set+0x130/0x130 [] call_timer_fn+0x36/0x110 [] ? pid_param_set+0x130/0x130 [] run_timer_softirq+0x21f/0x320 [] __do_softirq+0xef/0x280 [] call_softirq+0x1c/0x30 [] do_softirq+0x65/0xa0 [] irq_exit+0x115/0x120 [] smp_apic_timer_interrupt+0x45/0x60 [] apic_timer_interrupt+0x6d/0x80 [] ? cpuidle_enter_state+0x52/0xc0 [] ? cpuidle_enter_state+0x48/0xc0 [] cpuidle_idle_call+0xc5/0x200 [] arch_cpu_idle+0xe/0x30 [] cpu_startup_entry+0xf1/0x290 [] start_secondary+0x1ba/0x230 Code: 42 0f 00 45 89 e6 48 01 c2 43 8d 44 6d 00 39 d0 73 26 49 c1 e5 08 89 d2 4d 63 f4 49 63 c5 48 c1 e2 08 48 c1 e0 08 48 63 ca 48 99 <48> f7 f9 48 98 4c 0f af f0 49 c1 ee 08 8b 43 78 c1 e0 08 44 29 RIP [] intel_pstate_timer_func+0x179/0x3d0 RSP The kernel values for cpudata for CPU 113 were: struct cpudata { cpu = 113, timer = { entry = { next = 0x0, prev = 0xdead000000200200 }, expires = 8357799745, base = 0xffff883fe84ec001, function = 0xffffffff814a9100 , data = 18446612406765768960, i_gain = 0, d_gain = 0, deadband = 0, last_err = 22489 }, last_sample_time = { tv64 = 4063132438017305 }, prev_aperf = 287326796397463, prev_mperf = 251427432090198, sample = { core_pct_busy = 23081, aperf = 2937407, mperf = 3257884, freq = 2524484, time = { tv64 = 4063149215234118 } } } which results in the time between samples = last_sample_time - sample.time = 4063149215234118 - 4063132438017305 = 16777216813 which is 16.777 seconds. The duration between reads of the APERF and MPERF registers overflowed a s32 sized integer in intel_pstate_get_scaled_busy()'s call to div_fp(). The result is that int_tofp(duration_us) == 0, and the kernel attempts to divide by 0. While the kernel shouldn't be delaying for a long time, it can and does happen and the intel_pstate driver should not panic in this situation. This patch changes the div_fp() function to use div64_s64() to allow for "long" division. This will avoid the overflow condition on long delays. [v2]: use div64_s64() in div_fp() Signed-off-by: Prarit Bhargava Signed-off-by: Rafael J. Wysocki --- diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index aef357203593..1da3197425c5 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -48,9 +48,9 @@ static inline int32_t mul_fp(int32_t x, int32_t y) return ((int64_t)x * (int64_t)y) >> FRAC_BITS; } -static inline int32_t div_fp(int32_t x, int32_t y) +static inline int32_t div_fp(s64 x, s64 y) { - return div_s64((int64_t)x << FRAC_BITS, y); + return div64_s64((int64_t)x << FRAC_BITS, y); } static inline int ceiling_fp(int32_t x) @@ -802,7 +802,7 @@ static inline void intel_pstate_set_sample_time(struct cpudata *cpu) static inline int32_t intel_pstate_get_scaled_busy(struct cpudata *cpu) { int32_t core_busy, max_pstate, current_pstate, sample_ratio; - u32 duration_us; + s64 duration_us; u32 sample_time; /* @@ -829,8 +829,8 @@ static inline int32_t intel_pstate_get_scaled_busy(struct cpudata *cpu) * to adjust our busyness. */ sample_time = pid_params.sample_rate_ms * USEC_PER_MSEC; - duration_us = (u32) ktime_us_delta(cpu->sample.time, - cpu->last_sample_time); + duration_us = ktime_us_delta(cpu->sample.time, + cpu->last_sample_time); if (duration_us > sample_time * 3) { sample_ratio = div_fp(int_tofp(sample_time), int_tofp(duration_us));