From: Oreste Salerno Date: Wed, 27 Jan 2016 21:55:43 +0000 (-0800) Subject: Input: cyttsp - switch to using device properties X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=707b61bba8b16adb6a2cbc72b71a75e09cb0f81a;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git Input: cyttsp - switch to using device properties Drop support for platform data passed via a C-structure and switch to device properties instead, which should make the driver compatible with all platforms: OF, ACPI and static boards. Static boards should use property sets to communicate device parameters to the driver. Signed-off-by: Oreste Salerno Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov --- diff --git a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt new file mode 100644 index 000000000000..b75d4cfd2c36 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt @@ -0,0 +1,95 @@ +* Cypress cyttsp touchscreen controller + +Required properties: + - compatible : must be "cypress,cyttsp-i2c" or "cypress,cyttsp-spi" + - reg : Device I2C address or SPI chip select number + - spi-max-frequency : Maximum SPI clocking speed of the device (for cyttsp-spi) + - interrupt-parent : the phandle for the gpio controller + (see interrupt binding[0]). + - interrupts : (gpio) interrupt to which the chip is connected + (see interrupt binding[0]). + - bootloader-key : the 8-byte bootloader key that is required to switch + the chip from bootloader mode (default mode) to + application mode. + This property has to be specified as an array of 8 + '/bits/ 8' values. + +Optional properties: + - reset-gpios : the reset gpio the chip is connected to + (see GPIO binding[1] for more details). + - touchscreen-size-x : horizontal resolution of touchscreen (in pixels) + - touchscreen-size-y : vertical resolution of touchscreen (in pixels) + - touchscreen-fuzz-x : horizontal noise value of the absolute input device + (in pixels) + - touchscreen-fuzz-y : vertical noise value of the absolute input device + (in pixels) + - active-distance : the distance in pixels beyond which a touch must move + before movement is detected and reported by the device. + Valid values: 0-15. + - active-interval-ms : the minimum period in ms between consecutive + scanning/processing cycles when the chip is in active mode. + Valid values: 0-255. + - lowpower-interval-ms : the minimum period in ms between consecutive + scanning/processing cycles when the chip is in low-power mode. + Valid values: 0-2550 + - touch-timeout-ms : minimum time in ms spent in the active power state while no + touches are detected before entering low-power mode. + Valid values: 0-2550 + - use-handshake : enable register-based handshake (boolean). This should + only be used if the chip is configured to use 'blocking + communication with timeout' (in this case the device + generates an interrupt at the end of every + scanning/processing cycle). + +[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +[1]: Documentation/devicetree/bindings/gpio/gpio.txt + +Example: + &i2c1 { + /* ... */ + cyttsp@a { + compatible = "cypress,cyttsp-i2c"; + reg = <0xa>; + interrupt-parent = <&gpio0>; + interrupts = <28 0>; + reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + + bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>; + active-distance = <8>; + active-interval-ms = <0>; + lowpower-interval-ms = <200>; + touch-timeout-ms = <100>; + }; + + /* ... */ + }; + + &mcspi1 { + /* ... */ + cyttsp@0 { + compatible = "cypress,cyttsp-spi"; + spi-max-frequency = <6000000>; + reg = <0>; + interrupt-parent = <&gpio0>; + interrupts = <28 0>; + reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + + bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>; + active-distance = <8>; + active-interval-ms = <0>; + lowpower-interval-ms = <200>; + touch-timeout-ms = <100>; + }; + + /* ... */ + }; diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c index b6653aa06108..8814b6c87097 100644 --- a/drivers/input/touchscreen/cyttsp_core.c +++ b/drivers/input/touchscreen/cyttsp_core.c @@ -30,9 +30,12 @@ #include #include #include +#include #include #include #include +#include +#include #include "cyttsp_core.h" @@ -57,6 +60,7 @@ #define CY_DELAY_DFLT 20 /* ms */ #define CY_DELAY_MAX 500 #define CY_ACT_DIST_DFLT 0xF8 +#define CY_ACT_DIST_MASK 0x0F #define CY_HNDSHK_BIT 0x80 /* device mode bits */ #define CY_OPERATE_MODE 0x00 @@ -120,7 +124,7 @@ static int ttsp_send_command(struct cyttsp *ts, u8 cmd) static int cyttsp_handshake(struct cyttsp *ts) { - if (ts->pdata->use_hndshk) + if (ts->use_hndshk) return ttsp_send_command(ts, ts->xy_data.hst_mode ^ CY_HNDSHK_BIT); @@ -142,9 +146,9 @@ static int cyttsp_exit_bl_mode(struct cyttsp *ts) u8 bl_cmd[sizeof(bl_command)]; memcpy(bl_cmd, bl_command, sizeof(bl_command)); - if (ts->pdata->bl_keys) + if (ts->bl_keys) memcpy(&bl_cmd[sizeof(bl_command) - CY_NUM_BL_KEYS], - ts->pdata->bl_keys, CY_NUM_BL_KEYS); + ts->bl_keys, CY_NUM_BL_KEYS); error = ttsp_write_block_data(ts, CY_REG_BASE, sizeof(bl_cmd), bl_cmd); @@ -217,14 +221,14 @@ static int cyttsp_set_sysinfo_regs(struct cyttsp *ts) { int retval = 0; - if (ts->pdata->act_intrvl != CY_ACT_INTRVL_DFLT || - ts->pdata->tch_tmout != CY_TCH_TMOUT_DFLT || - ts->pdata->lp_intrvl != CY_LP_INTRVL_DFLT) { + if (ts->act_intrvl != CY_ACT_INTRVL_DFLT || + ts->tch_tmout != CY_TCH_TMOUT_DFLT || + ts->lp_intrvl != CY_LP_INTRVL_DFLT) { u8 intrvl_ray[] = { - ts->pdata->act_intrvl, - ts->pdata->tch_tmout, - ts->pdata->lp_intrvl + ts->act_intrvl, + ts->tch_tmout, + ts->lp_intrvl }; /* set intrvl registers */ @@ -263,7 +267,7 @@ out: static int cyttsp_act_dist_setup(struct cyttsp *ts) { - u8 act_dist_setup = ts->pdata->act_dist; + u8 act_dist_setup = ts->act_dist; /* Init gesture; active distance setup */ return ttsp_write_block_data(ts, CY_REG_ACT_DIST, @@ -528,25 +532,82 @@ static void cyttsp_close(struct input_dev *dev) cyttsp_disable(ts); } -static void cyttsp_platform_exit(void *data) +static int cyttsp_parse_properties(struct cyttsp *ts) { - struct cyttsp *ts = data; + struct device *dev = ts->dev; + u32 dt_value; + int ret; + + ts->bl_keys = devm_kzalloc(dev, CY_NUM_BL_KEYS, GFP_KERNEL); + if (!ts->bl_keys) + return -ENOMEM; + + /* Set some default values */ + ts->use_hndshk = false; + ts->act_dist = CY_ACT_DIST_DFLT; + ts->act_intrvl = CY_ACT_INTRVL_DFLT; + ts->tch_tmout = CY_TCH_TMOUT_DFLT; + ts->lp_intrvl = CY_LP_INTRVL_DFLT; + + ret = device_property_read_u8_array(dev, "bootloader-key", + ts->bl_keys, CY_NUM_BL_KEYS); + if (ret) { + dev_err(dev, + "bootloader-key property could not be retrieved\n"); + return ret; + } + + ts->use_hndshk = device_property_present(dev, "use-handshake"); + + if (!device_property_read_u32(dev, "active-distance", &dt_value)) { + if (dt_value > 15) { + dev_err(dev, "active-distance (%u) must be [0-15]\n", + dt_value); + return -EINVAL; + } + ts->act_dist &= ~CY_ACT_DIST_MASK; + ts->act_dist |= dt_value; + } + + if (!device_property_read_u32(dev, "active-interval-ms", &dt_value)) { + if (dt_value > 255) { + dev_err(dev, "active-interval-ms (%u) must be [0-255]\n", + dt_value); + return -EINVAL; + } + ts->act_intrvl = dt_value; + } - if (ts->pdata->exit) - ts->pdata->exit(); + if (!device_property_read_u32(dev, "lowpower-interval-ms", &dt_value)) { + if (dt_value > 2550) { + dev_err(dev, "lowpower-interval-ms (%u) must be [0-2550]\n", + dt_value); + return -EINVAL; + } + /* Register value is expressed in 0.01s / bit */ + ts->lp_intrvl = dt_value / 10; + } + + if (!device_property_read_u32(dev, "touch-timeout-ms", &dt_value)) { + if (dt_value > 2550) { + dev_err(dev, "touch-timeout-ms (%u) must be [0-2550]\n", + dt_value); + return -EINVAL; + } + /* Register value is expressed in 0.01s / bit */ + ts->tch_tmout = dt_value / 10; + } + + return 0; } struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, struct device *dev, int irq, size_t xfer_buf_size) { - const struct cyttsp_platform_data *pdata = dev_get_platdata(dev); struct cyttsp *ts; struct input_dev *input_dev; int error; - if (!pdata || !pdata->name || irq <= 0) - return ERR_PTR(-EINVAL); - ts = devm_kzalloc(dev, sizeof(*ts) + xfer_buf_size, GFP_KERNEL); if (!ts) return ERR_PTR(-ENOMEM); @@ -557,29 +618,24 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, ts->dev = dev; ts->input = input_dev; - ts->pdata = dev_get_platdata(dev); ts->bus_ops = bus_ops; ts->irq = irq; - init_completion(&ts->bl_ready); - snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev)); - - error = devm_add_action(dev, cyttsp_platform_exit, ts); - if (error) { - dev_err(dev, "failed to install exit action: %d\n", error); + ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ts->reset_gpio)) { + error = PTR_ERR(ts->reset_gpio); + dev_err(dev, "Failed to request reset gpio, error %d\n", error); return ERR_PTR(error); } - if (pdata->init) { - error = pdata->init(); - if (error) { - dev_err(ts->dev, "platform init failed, err: %d\n", - error); - return ERR_PTR(error); - } - } + error = cyttsp_parse_properties(ts); + if (error) + return ERR_PTR(error); + + init_completion(&ts->bl_ready); + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev)); - input_dev->name = pdata->name; + input_dev->name = "Cypress TTSP TouchScreen"; input_dev->phys = ts->phys; input_dev->id.bustype = bus_ops->bustype; input_dev->dev.parent = ts->dev; @@ -589,13 +645,9 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, input_set_drvdata(input_dev, ts); - __set_bit(EV_ABS, input_dev->evbit); - input_set_abs_params(input_dev, ABS_MT_POSITION_X, - 0, pdata->maxx, 0, 0); - input_set_abs_params(input_dev, ABS_MT_POSITION_Y, - 0, pdata->maxy, 0, 0); - input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, - 0, CY_MAXZ, 0, 0); + input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X); + input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y); + touchscreen_parse_properties(input_dev, true); error = input_mt_init_slots(input_dev, CY_MAX_ID, 0); if (error) { @@ -605,7 +657,7 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, error = devm_request_threaded_irq(dev, ts->irq, NULL, cyttsp_irq, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - pdata->name, ts); + "cyttsp", ts); if (error) { dev_err(ts->dev, "failed to request IRQ %d, err: %d\n", ts->irq, error); diff --git a/drivers/input/touchscreen/cyttsp_core.h b/drivers/input/touchscreen/cyttsp_core.h index c5e7afce6de8..7835e2bacf5a 100644 --- a/drivers/input/touchscreen/cyttsp_core.h +++ b/drivers/input/touchscreen/cyttsp_core.h @@ -129,7 +129,6 @@ struct cyttsp { int irq; struct input_dev *input; char phys[32]; - const struct cyttsp_platform_data *pdata; const struct cyttsp_bus_ops *bus_ops; struct cyttsp_bootloader_data bl_data; struct cyttsp_sysinfo_data sysinfo_data; @@ -138,6 +137,14 @@ struct cyttsp { enum cyttsp_state state; bool suspended; + struct gpio_desc *reset_gpio; + bool use_hndshk; + u8 act_dist; + u8 act_intrvl; + u8 tch_tmout; + u8 lp_intrvl; + u8 *bl_keys; + u8 xfer_buf[] ____cacheline_aligned; }; diff --git a/include/linux/input/cyttsp.h b/include/linux/input/cyttsp.h index 5af7c66f1fca..586c8c95dcb0 100644 --- a/include/linux/input/cyttsp.h +++ b/include/linux/input/cyttsp.h @@ -40,19 +40,4 @@ /* Active distance in pixels for a gesture to be reported */ #define CY_ACT_DIST_DFLT 0xF8 /* pixels */ -struct cyttsp_platform_data { - u32 maxx; - u32 maxy; - bool use_hndshk; - u8 act_dist; /* Active distance */ - u8 act_intrvl; /* Active refresh interval; ms */ - u8 tch_tmout; /* Active touch timeout; ms */ - u8 lp_intrvl; /* Low power refresh interval; ms */ - int (*init)(void); - void (*exit)(void); - char *name; - s16 irq_gpio; - u8 *bl_keys; -}; - #endif /* _CYTTSP_H_ */