From: Max Schwarz <max.schwarz@online.de>
Date: Sun, 9 Mar 2014 19:43:11 +0000 (+0100)
Subject: ARM: rockchip: rk3188: enable pull-ups on UART RX pins
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=6faff9b6bd3d2a279b806d721bb2257fdd2e6bf2;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git
ARM: rockchip: rk3188: enable pull-ups on UART RX pins
The default behaviour of the uart-rx pins on the rk3188 is to be pulled up and
a lot of designs use diodes to even prevent them from being raised from the
outside.
Therefore change the rx-pin settings accordingly.
This also fixes a uart receive problem on mass production Radxa Rock boards.
Signed-off-by: Max Schwarz <max.schwarz@online.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index bb36596ea205..ed9a70af3e3f 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -149,7 +149,7 @@
uart0 {
uart0_xfer: uart0-xfer {
- rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_none>,
+ rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
};
@@ -164,7 +164,7 @@
uart1 {
uart1_xfer: uart1-xfer {
- rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_none>,
+ rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>,
<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
};
@@ -179,7 +179,7 @@
uart2 {
uart2_xfer: uart2-xfer {
- rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_none>,
+ rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>,
<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
};
/* no rts / cts for uart2 */
@@ -187,7 +187,7 @@
uart3 {
uart3_xfer: uart3-xfer {
- rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_none>,
+ rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>,
<RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
};