From: Wolfram Sang Date: Fri, 2 May 2014 19:15:14 +0000 (+0200) Subject: i2c: sh_mobile: bail out on errors when initializing X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=6ed7053c2255c34886297b995c6a18607b36d668;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git i2c: sh_mobile: bail out on errors when initializing sh_mobile_i2c_init() could detect wrong settings, but didn't bail out, so it would continue unconfigured. Fix this. Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang --- diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 9a5b693454e1..9f02013eaeeb 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -228,7 +228,7 @@ static u32 sh_mobile_i2c_icch(unsigned long count_khz, u32 tHIGH, u32 tf) return (((count_khz * (tHIGH + tf)) + 5000) / 10000); } -static void sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd) +static int sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd) { unsigned long i2c_clk_khz; u32 tHIGH, tLOW, tf; @@ -236,6 +236,7 @@ static void sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd) /* Get clock rate after clock is enabled */ clk_prepare_enable(pd->clk); i2c_clk_khz = clk_get_rate(pd->clk) / 1000; + clk_disable_unprepare(pd->clk); i2c_clk_khz /= pd->clks_per_count; if (pd->bus_speed == STANDARD_MODE) { @@ -249,7 +250,7 @@ static void sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd) } else { dev_err(pd->dev, "unrecognized bus speed %lu Hz\n", pd->bus_speed); - goto out; + return -EINVAL; } pd->iccl = sh_mobile_i2c_iccl(i2c_clk_khz, tLOW, tf); @@ -266,8 +267,7 @@ static void sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd) else pd->icic &= ~ICIC_ICCHB8; -out: - clk_disable_unprepare(pd->clk); + return 0; } static void activate_ch(struct sh_mobile_i2c_data *pd) @@ -677,7 +677,9 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) if (resource_size(res) > 0x17) pd->flags |= IIC_FLAG_HAS_ICIC67; - sh_mobile_i2c_init(pd); + ret = sh_mobile_i2c_init(pd); + if (ret) + return ret; /* Enable Runtime PM for this device. *