From: Fabio Estevam Date: Thu, 17 Mar 2011 01:52:33 +0000 (-0300) Subject: ARM: mx5/mx53_evk: Use gpio_request_one in mx53_evk_fec_reset X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=6ea6392cc4ff9214c7356e8ca71244c006a95ddb;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git ARM: mx5/mx53_evk: Use gpio_request_one in mx53_evk_fec_reset Current code inside mx53_evk_fec_reset uses gpio_direction_output with initial value of the GPIO and also sets the GPIO value via gpio_set_value right after. This is not needed. By using gpio_request_one it is possible to set the direction and initial value in one shot. Signed-off-by: Fabio Estevam Acked-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index 7b5735c5ea59..d771999a1672 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -82,13 +82,12 @@ static inline void mx53_evk_fec_reset(void) int ret; /* reset FEC PHY */ - ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset"); + ret = gpio_request_one(SMD_FEC_PHY_RST, GPIOF_OUT_INIT_LOW, + "fec-phy-reset"); if (ret) { printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); return; } - gpio_direction_output(SMD_FEC_PHY_RST, 0); - gpio_set_value(SMD_FEC_PHY_RST, 0); msleep(1); gpio_set_value(SMD_FEC_PHY_RST, 1); }