From: Rohit Gupta Date: Sat, 7 Mar 2015 02:46:04 +0000 (-0800) Subject: cpufreq: interactive: Rearm governor timer at max freq X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=6e9129c199c6c34416c98443eda9b2242272b422;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git cpufreq: interactive: Rearm governor timer at max freq Interactive governor doesn't rearm per-cpu timer if target_freq is equal to policy->max. However, this does not have clear performance benefits. Profiling doesn't show any difference in benchmarks, games or other workloads, if timers are always rearmed. At same time, there are a few issues caused by not rearming timer at policy->max. 1) min_sample_time enforcement is inconsistent For target frequency that is lower than policy->max, it will not drop until min_sample_time has passed since last frequency evaluation selected current frequency. However, for policy->max, it will always drop immediately as long as CPU has been run for longer than min_sample_time. This is because timer is not running and thus floor_freq and floor_validate_time is not updated. Example: assume min_sample_time is 59ms and timer_rate is 20ms. Frequency X < Y. Let's say CPU would pick the following frequencies before accounting for min_sample_time in each 20ms sampling window. Y, Y, Y, Y, X, X, X, X, X If Y is not policy->max, the final target_freq after considering min_sample_time will be Y, Y, Y, Y, *Y, *Y, X, X, X * marks the windows where frequency is prevented from dropping. If Y is policy->max, the final target_freq will be Y, Y, Y, Y, X, X, X, X, X 2) Rearm timer in IDLE_START does not work as intended IDLE_START/END is sent in arch_cpu_idle_enter/exit(). However, next wake up is decided in tick_nohz_idle_enter(), which traverses the timer list before idle notification is sent out. Therefore, rearming timer in idle notification won't take effect until CPU wakes up at least once. In rare scenarios when a CPU goes to idle and sleeps for a long time immediately after a heavy load stops, it may not wake up to drop its frequency vote for a long time, defeating the purpose of having a slack_timer. 3) Need to rearm timer for policy->max change commit 535a553fc1c4b4c3627c73214ade6326615a7463 (cpufreq: interactive: restructure CPUFREQ_GOV_LIMITS) mentions the problem of timer getting indefinitely pushed back due to frequency changes in policy->min/max. However, it still cancels and rearms timer if policy->max is increased, and same problem could still happen if policy->max is frequently changing after the fix. The best solution is to always rearm timer for each CPU even if it's running at policy->max. Rearming timers even if target_freq is policy->max solves these problems cleanly. It also simplifies the design and code of interactive governor. Change-Id: I973853d2375ea6f697fa4cee04a89efe6b8bf735 Reviewed-by: Saravana Kannan Signed-off-by: Junjie Wu Signed-off-by: Rohit Gupta --- diff --git a/drivers/cpufreq/cpufreq_interactive.c b/drivers/cpufreq/cpufreq_interactive.c index 19a2b378edb..1dba312c0da 100644 --- a/drivers/cpufreq/cpufreq_interactive.c +++ b/drivers/cpufreq/cpufreq_interactive.c @@ -61,7 +61,6 @@ struct cpufreq_interactive_cpuinfo { spinlock_t target_freq_lock; /*protects target freq */ unsigned int target_freq; unsigned int floor_freq; - unsigned int max_freq; u64 floor_validate_time; u64 hispeed_validate_time; struct rw_semaphore enable_sem; @@ -467,7 +466,7 @@ static void cpufreq_interactive_timer(unsigned long data) data, cpu_load, pcpu->target_freq, pcpu->policy->cur, new_freq); spin_unlock_irqrestore(&pcpu->target_freq_lock, flags); - goto rearm_if_notmax; + goto rearm; } trace_cpufreq_interactive_target(data, cpu_load, pcpu->target_freq, @@ -480,14 +479,6 @@ static void cpufreq_interactive_timer(unsigned long data) spin_unlock_irqrestore(&speedchange_cpumask_lock, flags); wake_up_process_no_notif(tunables->speedchange_task); -rearm_if_notmax: - /* - * Already set max speed and don't see a need to change that, - * wait until next idle to re-evaluate, don't need timer. - */ - if (pcpu->target_freq == pcpu->policy->max) - goto exit; - rearm: if (!timer_pending(&pcpu->cpu_timer)) cpufreq_interactive_timer_resched(data); @@ -497,37 +488,6 @@ exit: return; } -static void cpufreq_interactive_idle_start(void) -{ - struct cpufreq_interactive_cpuinfo *pcpu = - &per_cpu(cpuinfo, smp_processor_id()); - int pending; - - if (!down_read_trylock(&pcpu->enable_sem)) - return; - if (!pcpu->governor_enabled) { - up_read(&pcpu->enable_sem); - return; - } - - pending = timer_pending(&pcpu->cpu_timer); - - if (pcpu->target_freq != pcpu->policy->min) { - /* - * Entering idle while not at lowest speed. On some - * platforms this can hold the other CPU(s) at that speed - * even though the CPU is idle. Set a timer to re-evaluate - * speed so this idle CPU doesn't hold the other CPUs above - * min indefinitely. This should probably be a quirk of - * the CPUFreq driver. - */ - if (!pending) - cpufreq_interactive_timer_resched(smp_processor_id()); - } - - up_read(&pcpu->enable_sem); -} - static void cpufreq_interactive_idle_end(void) { struct cpufreq_interactive_cpuinfo *pcpu = @@ -1176,14 +1136,8 @@ static int cpufreq_interactive_idle_notifier(struct notifier_block *nb, unsigned long val, void *data) { - switch (val) { - case IDLE_START: - cpufreq_interactive_idle_start(); - break; - case IDLE_END: + if (val == IDLE_END) cpufreq_interactive_idle_end(); - break; - } return 0; } @@ -1343,7 +1297,6 @@ static int cpufreq_governor_interactive(struct cpufreq_policy *policy, ktime_to_us(ktime_get()); pcpu->hispeed_validate_time = pcpu->floor_validate_time; - pcpu->max_freq = policy->max; down_write(&pcpu->enable_sem); del_timer_sync(&pcpu->cpu_timer); del_timer_sync(&pcpu->cpu_slack_timer); @@ -1418,14 +1371,6 @@ static int cpufreq_governor_interactive(struct cpufreq_policy *policy, spin_unlock_irqrestore(&pcpu->target_freq_lock, flags); up_read(&pcpu->enable_sem); - - down_write(&pcpu->enable_sem); - del_timer_sync(&pcpu->cpu_timer); - del_timer_sync(&pcpu->cpu_slack_timer); - cpufreq_interactive_timer_resched(j); - up_write(&pcpu->enable_sem); - - pcpu->max_freq = policy->max; } break; }