From: Luis R. Rodriguez Date: Mon, 13 Oct 2008 21:08:10 +0000 (-0700) Subject: ath5k: correct ath5k signal quality X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=6e0e0bf80c963d83f511e1cda652630cf31ebf85;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git ath5k: correct ath5k signal quality This adjusts ath5k's signal quality reporting taking into consideration received beacons at an RSSI of 35 should indicate you can use of 54 Mbps on a single stream card (all ath5k cards) reliably. Signed-off-by: Luis R. Rodriguez Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index c98380845fa7..b1e9a47c1c55 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -1778,7 +1778,17 @@ accept: rxs.noise = sc->ah->ah_noise_floor; rxs.signal = rxs.noise + rs.rs_rssi; - rxs.qual = rs.rs_rssi * 100 / 64; + + /* An rssi of 35 indicates you should be able use + * 54 Mbps reliably. A more elaborate scheme can be used + * here but it requires a map of SNR/throughput for each + * possible mode used */ + rxs.qual = rs.rs_rssi * 100 / 35; + + /* rssi can be more than 35 though, anything above that + * should be considered at 100% */ + if (rxs.qual > 100) + rxs.qual = 100; rxs.antenna = rs.rs_antenna; rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);