From: Linus Torvalds Date: Wed, 19 Mar 2008 04:26:24 +0000 (-0700) Subject: IDE: Make taskfile interface more robust wrt unexpected end-of-command X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=6c3c3158a81d6a92d335dd27ad9eb43f6b4c664b;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git IDE: Make taskfile interface more robust wrt unexpected end-of-command Now that we handle all the special commands using REQ_TYPE_ATA_TASKFILE rather than using the old REQ_TYPE_ATA_CMD model, we need to also emulate the lack of full taskfile data that comes with the old command model (ie when commands are generated with the HDIO_DRIVE_CMD ioctl rather than using the HDIO_DRIVE_TASK[FILE] ioctls). In particular, this means that we should handle command completion the more relaxed way that the old drive_cmd_intr() code did. It allows commands to finish early even if they don't use up all the data that we thought we had for them. This fixes a regression seen by Anders Eriksson where some SMART commands sent by smartd would cause a boot-time system hang on his machine because the IDE command handling code didn't realize that the command had completed. Tested-by: Anders Eriksson Cc: Jens Axboe Cc: Ingo Molnar Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: Linus Torvalds --- diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 0518a2e948cf..4c86a8d84b4c 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -422,6 +422,25 @@ void task_end_request(ide_drive_t *drive, struct request *rq, u8 stat) ide_end_request(drive, 1, rq->nr_sectors); } +/* + * We got an interrupt on a task_in case, but no errors and no DRQ. + * + * It might be a spurious irq (shared irq), but it might be a + * command that had no output. + */ +static ide_startstop_t task_in_unexpected(ide_drive_t *drive, struct request *rq, u8 stat) +{ + /* Command all done? */ + if (OK_STAT(stat, READY_STAT, BUSY_STAT)) { + task_end_request(drive, rq, stat); + return ide_stopped; + } + + /* Assume it was a spurious irq */ + ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL); + return ide_started; +} + /* * Handler for command with PIO data-in phase (Read/Read Multiple). */ @@ -431,18 +450,17 @@ static ide_startstop_t task_in_intr(ide_drive_t *drive) struct request *rq = HWGROUP(drive)->rq; u8 stat = ide_read_status(drive); - /* new way for dealing with premature shared PCI interrupts */ - if (!OK_STAT(stat, DRQ_STAT, BAD_R_STAT)) { - if (stat & (ERR_STAT | DRQ_STAT)) - return task_error(drive, rq, __FUNCTION__, stat); - /* No data yet, so wait for another IRQ. */ - ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL); - return ide_started; - } + /* Error? */ + if (stat & ERR_STAT) + return task_error(drive, rq, __FUNCTION__, stat); + + /* Didn't want any data? Odd. */ + if (!(stat & DRQ_STAT)) + return task_in_unexpected(drive, rq, stat); ide_pio_datablock(drive, rq, 0); - /* If it was the last datablock check status and finish transfer. */ + /* Are we done? Check status and finish transfer. */ if (!hwif->nleft) { stat = wait_drive_not_busy(drive); if (!OK_STAT(stat, 0, BAD_STAT))