From: Heiko Stübner Date: Sun, 15 Jun 2014 23:36:33 +0000 (+0200) Subject: pinctrl: rockchip: precalculate iomux offsets X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=6bc0d121a95b31b0962bf6a3f89099059bde409e;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git pinctrl: rockchip: precalculate iomux offsets An upcoming SoC introduces an interesting quirk to iomux handling making the calculation of the iomux register-offset harder. To keep the complexity down when getting/setting the mux, precalculate the actual register offset at probe-time. Signed-off-by: Heiko Stuebner Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index 2f5ba046232e..202ac82082d2 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -71,9 +71,13 @@ enum rockchip_pinctrl_type { /** * @type: iomux variant using IOMUX_* constants + * @offset: if initialized to -1 it will be autocalculated, by specifying + * an initial offset value the relevant source offset can be reset + * to a new value for autocalculating the following iomux registers. */ struct rockchip_iomux { int type; + int offset; }; /** @@ -119,6 +123,12 @@ struct rockchip_pin_bank { .bank_num = id, \ .nr_pins = pins, \ .name = label, \ + .iomux = { \ + { .offset = -1 }, \ + { .offset = -1 }, \ + { .offset = -1 }, \ + { .offset = -1 }, \ + }, \ } #define PIN_BANK_IOMUX_FLAGS(id, pins, label, iom0, iom1, iom2, iom3) \ @@ -127,10 +137,10 @@ struct rockchip_pin_bank { .nr_pins = pins, \ .name = label, \ .iomux = { \ - { .type = iom0, }, \ - { .type = iom1, }, \ - { .type = iom2, }, \ - { .type = iom3, }, \ + { .type = iom0, .offset = -1 }, \ + { .type = iom1, .offset = -1 }, \ + { .type = iom2, .offset = -1 }, \ + { .type = iom3, .offset = -1 }, \ }, \ } @@ -376,9 +386,7 @@ static int rockchip_get_mux(struct rockchip_pin_bank *bank, int pin) return RK_FUNC_GPIO; /* get basic quadrupel of mux registers and the correct reg inside */ - reg = info->ctrl->mux_offset; - reg += bank->bank_num * 0x10; - reg += iomux_num * 4; + reg = bank->iomux[iomux_num].offset; bit = (pin % 8) * 2; ret = regmap_read(info->regmap_base, reg, &val); @@ -427,9 +435,7 @@ static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux) bank->bank_num, pin, mux); /* get basic quadrupel of mux registers and the correct reg inside */ - reg = info->ctrl->mux_offset; - reg += bank->bank_num * 0x10; - reg += iomux_num * 4; + reg = bank->iomux[iomux_num].offset; bit = (pin % 8) * 2; spin_lock_irqsave(&bank->slock, flags); @@ -1515,7 +1521,7 @@ static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data( struct device_node *np; struct rockchip_pin_ctrl *ctrl; struct rockchip_pin_bank *bank; - int i; + int grf_offs, i, j; match = of_match_node(rockchip_pinctrl_dt_match, node); ctrl = (struct rockchip_pin_ctrl *)match->data; @@ -1537,12 +1543,40 @@ static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data( } } + grf_offs = ctrl->mux_offset; bank = ctrl->pin_banks; for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + int bank_pins = 0; + spin_lock_init(&bank->slock); bank->drvdata = d; bank->pin_base = ctrl->nr_pins; ctrl->nr_pins += bank->nr_pins; + + /* calculate iomux offsets */ + for (j = 0; j < 4; j++) { + struct rockchip_iomux *iom = &bank->iomux[j]; + + if (bank_pins >= bank->nr_pins) + break; + + /* preset offset value, set new start value */ + if (iom->offset >= 0) { + grf_offs = iom->offset; + } else { /* set current offset */ + iom->offset = grf_offs; + } + + dev_dbg(d->dev, "bank %d, iomux %d has offset 0x%x\n", + i, j, iom->offset); + + /* + * Increase offset according to iomux width. + */ + grf_offs += 4; + + bank_pins += 8; + } } return ctrl;