From: Matt Domsch Date: Fri, 29 Sep 2006 20:23:23 +0000 (-0500) Subject: PCI: optionally sort device lists breadth-first X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=6b4b78fed47e7380dfe9280b154e8b9bfcd4c86c;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git PCI: optionally sort device lists breadth-first Problem: New Dell PowerEdge servers have 2 embedded ethernet ports, which are labeled NIC1 and NIC2 on the chassis, in the BIOS setup screens, and in the printed documentation. Assuming no other add-in ethernet ports in the system, Linux 2.4 kernels name these eth0 and eth1 respectively. Many people have come to expect this naming. Linux 2.6 kernels name these eth1 and eth0 respectively (backwards from expectations). I also have reports that various Sun and HP servers have similar behavior. Root cause: Linux 2.4 kernels walk the pci_devices list, which happens to be sorted in breadth-first order (or pcbios_find_device order on i386, which most often is breadth-first also). 2.6 kernels have both the pci_devices list and the pci_bus_type.klist_devices list, the latter is what is walked at driver load time to match the pci_id tables; this klist happens to be in depth-first order. On systems where, for physical routing reasons, NIC1 appears on a lower bus number than NIC2, but NIC2's bridge is discovered first in the depth-first ordering, NIC2 will be discovered before NIC1. If the list were sorted breadth-first, NIC1 would be discovered before NIC2. A PowerEdge 1955 system has the following topology which easily exhibits the difference between depth-first and breadth-first device lists. -[0000:00]-+-00.0 Intel Corporation 5000P Chipset Memory Controller Hub +-02.0-[0000:03-08]--+-00.0-[0000:04-07]--+-00.0-[0000:05-06]----00.0-[0000:06]----00.0 Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet (labeled NIC2, 2.4 kernel name eth1, 2.6 kernel name eth0) +-1c.0-[0000:01-02]----00.0-[0000:02]----00.0 Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet (labeled NIC1, 2.4 kernel name eth0, 2.6 kernel name eth1) Other factors, such as device driver load order and the presence of PCI slots at various points in the bus hierarchy further complicate this problem; I'm not trying to solve those here, just restore the device order, and thus basic behavior, that 2.4 kernels had. Solution: The solution can come in multiple steps. Suggested fix #1: kernel Patch below optionally sorts the two device lists into breadth-first ordering to maintain compatibility with 2.4 kernels. It adds two new command line options: pci=bfsort pci=nobfsort to force the sort order, or not, as you wish. It also adds DMI checks for the specific Dell systems which exhibit "backwards" ordering, to make them "right". Suggested fix #2: udev rules from userland Many people also have the expectation that embedded NICs are always discovered before add-in NICs (which this patch does not try to do). Using the PCI IRQ Routing Table provided by system BIOS, it's easy to determine which PCI devices are embedded, or if add-in, which PCI slot they're in. I'm working on a tool that would allow udev to name ethernet devices in ascending embedded, slot 1 .. slot N order, subsort by PCI bus/dev/fn breadth-first. It'll be possible to use it independent of udev as well for those distributions that don't use udev in their installers. Suggested fix #3: system board routing rules One can constrain the system board layout to put NIC1 ahead of NIC2 regardless of breadth-first or depth-first discovery order. This adds a significant level of complexity to board routing, and may not be possible in all instances (witness the above systems from several major manufacturers). I don't want to encourage this particular train of thought too far, at the expense of not doing #1 or #2 above. Feedback appreciated. Patch tested on a Dell PowerEdge 1955 blade with 2.6.18. You'll also note I took some liberty and temporarily break the klist abstraction to simplify and speed up the sort algorithm. I think that's both safe and appropriate in this instance. Signed-off-by: Matt Domsch Signed-off-by: Greg Kroah-Hartman --- diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index ff571f9298e0..dd00fd556a60 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1231,6 +1231,11 @@ and is between 256 and 4096 characters. It is defined in the file machine check when some devices' config space is read. But various workarounds are disabled and some IOMMU drivers will not work. + bfsort Sort PCI devices into breadth-first order. + This sorting is done to get a device + order compatible with older (<= 2.4) kernels. + nobfsort Don't sort PCI devices into breadth-first order. + pcmv= [HW,PCMCIA] BadgePAD 4 pd. [PARIDE] diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c index 68bce194e688..6d5ace845e44 100644 --- a/arch/i386/pci/common.c +++ b/arch/i386/pci/common.c @@ -20,6 +20,7 @@ unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | PCI_PROBE_MMCONF; +int pci_bf_sort; int pci_routeirq; int pcibios_last_bus = -1; unsigned long pirq_table_addr; @@ -117,6 +118,20 @@ void __devinit pcibios_fixup_bus(struct pci_bus *b) pci_read_bridge_bases(b); } +/* + * Only use DMI information to set this if nothing was passed + * on the kernel command line (which was parsed earlier). + */ + +static int __devinit set_bf_sort(struct dmi_system_id *d) +{ + if (pci_bf_sort == pci_bf_sort_default) { + pci_bf_sort = pci_dmi_bf; + printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident); + } + return 0; +} + /* * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus) */ @@ -130,11 +145,11 @@ static int __devinit assign_all_busses(struct dmi_system_id *d) } #endif +static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = { +#ifdef __i386__ /* * Laptops which need pci=assign-busses to see Cardbus cards */ -static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = { -#ifdef __i386__ { .callback = assign_all_busses, .ident = "Samsung X20 Laptop", @@ -144,6 +159,38 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = { }, }, #endif /* __i386__ */ + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge 1950", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"), + }, + }, + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge 1955", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"), + }, + }, + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge 2900", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"), + }, + }, + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge 2950", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"), + }, + }, {} }; @@ -189,6 +236,8 @@ static int __init pcibios_init(void) pcibios_resource_survey(); + if (pci_bf_sort >= pci_force_bf) + pci_sort_breadthfirst(); #ifdef CONFIG_PCI_BIOS if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT)) pcibios_sort(); @@ -203,6 +252,12 @@ char * __devinit pcibios_setup(char *str) if (!strcmp(str, "off")) { pci_probe = 0; return NULL; + } else if (!strcmp(str, "bfsort")) { + pci_bf_sort = pci_force_bf; + return NULL; + } else if (!strcmp(str, "nobfsort")) { + pci_bf_sort = pci_force_nobf; + return NULL; } #ifdef CONFIG_PCI_BIOS else if (!strcmp(str, "bios")) { diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h index 1814f74569c6..ad065cebd7b9 100644 --- a/arch/i386/pci/pci.h +++ b/arch/i386/pci/pci.h @@ -30,6 +30,13 @@ extern unsigned int pci_probe; extern unsigned long pirq_table_addr; +enum pci_bf_sort_state { + pci_bf_sort_default, + pci_force_nobf, + pci_force_bf, + pci_dmi_bf, +}; + /* pci-i386.c */ extern unsigned int pcibios_max_latency; diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index a3b0a5eb5054..e159d6604494 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1067,3 +1067,95 @@ EXPORT_SYMBOL(pci_scan_bridge); EXPORT_SYMBOL(pci_scan_single_device); EXPORT_SYMBOL_GPL(pci_scan_child_bus); #endif + +static int __init pci_sort_bf_cmp(const struct pci_dev *a, const struct pci_dev *b) +{ + if (pci_domain_nr(a->bus) < pci_domain_nr(b->bus)) return -1; + else if (pci_domain_nr(a->bus) > pci_domain_nr(b->bus)) return 1; + + if (a->bus->number < b->bus->number) return -1; + else if (a->bus->number > b->bus->number) return 1; + + if (a->devfn < b->devfn) return -1; + else if (a->devfn > b->devfn) return 1; + + return 0; +} + +/* + * Yes, this forcably breaks the klist abstraction temporarily. It + * just wants to sort the klist, not change reference counts and + * take/drop locks rapidly in the process. It does all this while + * holding the lock for the list, so objects can't otherwise be + * added/removed while we're swizzling. + */ +static void __init pci_insertion_sort_klist(struct pci_dev *a, struct list_head *list) +{ + struct list_head *pos; + struct klist_node *n; + struct device *dev; + struct pci_dev *b; + + list_for_each(pos, list) { + n = container_of(pos, struct klist_node, n_node); + dev = container_of(n, struct device, knode_bus); + b = to_pci_dev(dev); + if (pci_sort_bf_cmp(a, b) <= 0) { + list_move_tail(&a->dev.knode_bus.n_node, &b->dev.knode_bus.n_node); + return; + } + } + list_move_tail(&a->dev.knode_bus.n_node, list); +} + +static void __init pci_sort_breadthfirst_klist(void) +{ + LIST_HEAD(sorted_devices); + struct list_head *pos, *tmp; + struct klist_node *n; + struct device *dev; + struct pci_dev *pdev; + + spin_lock(&pci_bus_type.klist_devices.k_lock); + list_for_each_safe(pos, tmp, &pci_bus_type.klist_devices.k_list) { + n = container_of(pos, struct klist_node, n_node); + dev = container_of(n, struct device, knode_bus); + pdev = to_pci_dev(dev); + pci_insertion_sort_klist(pdev, &sorted_devices); + } + list_splice(&sorted_devices, &pci_bus_type.klist_devices.k_list); + spin_unlock(&pci_bus_type.klist_devices.k_lock); +} + +static void __init pci_insertion_sort_devices(struct pci_dev *a, struct list_head *list) +{ + struct pci_dev *b; + + list_for_each_entry(b, list, global_list) { + if (pci_sort_bf_cmp(a, b) <= 0) { + list_move_tail(&a->global_list, &b->global_list); + return; + } + } + list_move_tail(&a->global_list, list); +} + +static void __init pci_sort_breadthfirst_devices(void) +{ + LIST_HEAD(sorted_devices); + struct pci_dev *dev, *tmp; + + down_write(&pci_bus_sem); + list_for_each_entry_safe(dev, tmp, &pci_devices, global_list) { + pci_insertion_sort_devices(dev, &sorted_devices); + } + list_splice(&sorted_devices, &pci_devices); + up_write(&pci_bus_sem); +} + +void __init pci_sort_breadthfirst(void) +{ + pci_sort_breadthfirst_devices(); + pci_sort_breadthfirst_klist(); +} + diff --git a/include/linux/pci.h b/include/linux/pci.h index 09bf88fc80c5..4689e2a699c0 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -443,6 +443,7 @@ extern void pci_remove_bus(struct pci_bus *b); extern void pci_remove_bus_device(struct pci_dev *dev); extern void pci_stop_bus_device(struct pci_dev *dev); void pci_setup_cardbus(struct pci_bus *bus); +extern void pci_sort_breadthfirst(void); /* Generic PCI functions exported to card drivers */