From: Brice Goglin Date: Wed, 6 Aug 2008 14:14:43 +0000 (+0200) Subject: myri10ge: update firmware headers X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=6a4c4ad2f0aa331324649579649c5d9064893079;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git myri10ge: update firmware headers Update myri10ge firmware headers. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h index fdbeeee07372..993721090777 100644 --- a/drivers/net/myri10ge/myri10ge_mcp.h +++ b/drivers/net/myri10ge/myri10ge_mcp.h @@ -101,6 +101,8 @@ struct mcp_kreq_ether_recv { #define MXGEFW_ETH_SEND_3 0x2c0000 #define MXGEFW_ETH_RECV_SMALL 0x300000 #define MXGEFW_ETH_RECV_BIG 0x340000 +#define MXGEFW_ETH_SEND_GO 0x380000 +#define MXGEFW_ETH_SEND_STOP 0x3C0000 #define MXGEFW_ETH_SEND(n) (0x200000 + (((n) & 0x03) * 0x40000)) #define MXGEFW_ETH_SEND_OFFSET(n) (MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4) @@ -120,6 +122,11 @@ enum myri10ge_mcp_cmd_type { * MXGEFW_CMD_RESET is issued */ MXGEFW_CMD_SET_INTRQ_DMA, + /* data0 = LSW of the host address + * data1 = MSW of the host address + * data2 = slice number if multiple slices are used + */ + MXGEFW_CMD_SET_BIG_BUFFER_SIZE, /* in bytes, power of 2 */ MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, /* in bytes */ @@ -129,6 +136,8 @@ enum myri10ge_mcp_cmd_type { MXGEFW_CMD_GET_SEND_OFFSET, MXGEFW_CMD_GET_SMALL_RX_OFFSET, MXGEFW_CMD_GET_BIG_RX_OFFSET, + /* data0 = slice number if multiple slices are used */ + MXGEFW_CMD_GET_IRQ_ACK_OFFSET, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET, @@ -200,7 +209,12 @@ enum myri10ge_mcp_cmd_type { MXGEFW_CMD_SET_STATS_DMA_V2, /* data0, data1 = bus addr, * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows - * adding new stuff to mcp_irq_data without changing the ABI */ + * adding new stuff to mcp_irq_data without changing the ABI + * + * If multiple slices are used, data2 contains both the size of the + * structure (in the lower 16 bits) and the slice number + * (in the upper 16 bits). + */ MXGEFW_CMD_UNALIGNED_TEST, /* same than DMA_TEST (same args) but abort with UNALIGNED on unaligned @@ -222,13 +236,18 @@ enum myri10ge_mcp_cmd_type { MXGEFW_CMD_GET_MAX_RSS_QUEUES, MXGEFW_CMD_ENABLE_RSS_QUEUES, /* data0 = number of slices n (0, 1, ..., n-1) to enable - * data1 = interrupt mode. - * 0=share one INTx/MSI, 1=use one MSI-X per queue. + * data1 = interrupt mode | use of multiple transmit queues. + * 0=share one INTx/MSI. + * 1=use one MSI-X per queue. * If all queues share one interrupt, the driver must have set * RSS_SHARED_INTERRUPT_DMA before enabling queues. + * 2=enable both receive and send queues. + * Without this bit set, only one send queue (slice 0's send queue) + * is enabled. The receive queues are always enabled. */ -#define MXGEFW_SLICE_INTR_MODE_SHARED 0 -#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 1 +#define MXGEFW_SLICE_INTR_MODE_SHARED 0x0 +#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 0x1 +#define MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES 0x2 MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET, MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA, @@ -250,10 +269,13 @@ enum myri10ge_mcp_cmd_type { * 2: TCP_IPV4 (required by RSS) * 3: IPV4 | TCP_IPV4 (required by RSS) * 4: source port + * 5: source port + destination port */ #define MXGEFW_RSS_HASH_TYPE_IPV4 0x1 #define MXGEFW_RSS_HASH_TYPE_TCP_IPV4 0x2 #define MXGEFW_RSS_HASH_TYPE_SRC_PORT 0x4 +#define MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT 0x5 +#define MXGEFW_RSS_HASH_TYPE_MAX 0x5 MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE, /* Return data = the max. size of the entire headers of a IPv6 TSO packet. @@ -329,6 +351,20 @@ enum myri10ge_mcp_cmd_type { MXGEFW_CMD_GET_DCA_OFFSET, /* offset of dca control for WDMAs */ + + /* VMWare NetQueue commands */ + MXGEFW_CMD_NETQ_GET_FILTERS_PER_QUEUE, + MXGEFW_CMD_NETQ_ADD_FILTER, + /* data0 = filter_id << 16 | queue << 8 | type */ + /* data1 = MS4 of MAC Addr */ + /* data2 = LS2_MAC << 16 | VLAN_tag */ + MXGEFW_CMD_NETQ_DEL_FILTER, + /* data0 = filter_id */ + MXGEFW_CMD_NETQ_QUERY1, + MXGEFW_CMD_NETQ_QUERY2, + MXGEFW_CMD_NETQ_QUERY3, + MXGEFW_CMD_NETQ_QUERY4, + }; enum myri10ge_mcp_cmd_status { @@ -381,4 +417,10 @@ struct mcp_irq_data { u8 valid; }; +/* definitions for NETQ filter type */ +#define MXGEFW_NETQ_FILTERTYPE_NONE 0 +#define MXGEFW_NETQ_FILTERTYPE_MACADDR 1 +#define MXGEFW_NETQ_FILTERTYPE_VLAN 2 +#define MXGEFW_NETQ_FILTERTYPE_VLANMACADDR 3 + #endif /* __MYRI10GE_MCP_H__ */ diff --git a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h index 07d65c2cbb24..a8662ea8079a 100644 --- a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h +++ b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h @@ -35,7 +35,7 @@ struct mcp_gen_header { unsigned char mcp_index; unsigned char disable_rabbit; unsigned char unaligned_tlp; - unsigned char pad1; + unsigned char pcie_link_algo; unsigned counters_addr; unsigned copy_block_info; /* for small mcps loaded with "lload -d" */ unsigned short handoff_id_major; /* must be equal */