From: Sam Ravnborg Date: Tue, 12 Jul 2005 04:13:56 +0000 (-0700) Subject: [NET]: move config options out to individual protocols X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=6a2e9b738cb5c929df73b6acabdd8f9a4e9a0416;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git [NET]: move config options out to individual protocols Move the protocol specific config options out to the specific protocols. With this change net/Kconfig now starts to become readable and serve as a good basis for further re-structuring. The menu structure is left almost intact, except that indention is fixed in most cases. Most visible are the INET changes where several "depends on INET" are replaced with a single ifdef INET / endif pair. Several new files were created to accomplish this change - they are small but serve the purpose that config options are now distributed out where they belongs. Signed-off-by: Sam Ravnborg Signed-off-by: David S. Miller --- diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig index 69c488d933a2..b14e89004c3a 100644 --- a/drivers/net/appletalk/Kconfig +++ b/drivers/net/appletalk/Kconfig @@ -1,6 +1,33 @@ # # Appletalk driver configuration # +config ATALK + tristate "Appletalk protocol support" + select LLC + ---help--- + AppleTalk is the protocol that Apple computers can use to communicate + on a network. If your Linux box is connected to such a network and you + wish to connect to it, say Y. You will need to use the netatalk package + so that your Linux box can act as a print and file server for Macs as + well as access AppleTalk printers. Check out + on the WWW for details. + EtherTalk is the name used for AppleTalk over Ethernet and the + cheaper and slower LocalTalk is AppleTalk over a proprietary Apple + network using serial links. EtherTalk and LocalTalk are fully + supported by Linux. + + General information about how to connect Linux, Windows machines and + Macs is on the WWW at . The + NET-3-HOWTO, available from + , contains valuable + information as well. + + To compile this driver as a module, choose M here: the module will be + called appletalk. You almost certainly want to compile it as a + module so you can restart your AppleTalk stack without rebooting + your machine. I hear that the GNU boycott of Apple is over, so + even politically correct people are allowed to say Y here. + config DEV_APPLETALK bool "Appletalk interfaces support" depends on ATALK diff --git a/net/8021q/Kconfig b/net/8021q/Kconfig new file mode 100644 index 000000000000..c4a382e450e2 --- /dev/null +++ b/net/8021q/Kconfig @@ -0,0 +1,19 @@ +# +# Configuration for 802.1Q VLAN support +# + +config VLAN_8021Q + tristate "802.1Q VLAN Support" + ---help--- + Select this and you will be able to create 802.1Q VLAN interfaces + on your ethernet interfaces. 802.1Q VLAN supports almost + everything a regular ethernet interface does, including + firewalling, bridging, and of course IP traffic. You will need + the 'vconfig' tool from the VLAN project in order to effectively + use VLANs. See the VLAN web page for more information: + + + To compile this code as a module, choose M here: the module + will be called 8021q. + + If unsure, say N. diff --git a/net/Kconfig b/net/Kconfig index f46fc326c00b..2684e809a649 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -22,57 +22,14 @@ config NET recommended to read the NET-HOWTO, available from . -menu "Networking options" - depends on NET - -config PACKET - tristate "Packet socket" - ---help--- - The Packet protocol is used by applications which communicate - directly with network devices without an intermediate network - protocol implemented in the kernel, e.g. tcpdump. If you want them - to work, choose Y. - - To compile this driver as a module, choose M here: the module will - be called af_packet. - - If unsure, say Y. +# Make sure that all config symbols are dependent on NET +if NET -config PACKET_MMAP - bool "Packet socket: mmapped IO" - depends on PACKET - help - If you say Y here, the Packet protocol driver will use an IO - mechanism that results in faster communication. - - If unsure, say N. - -config UNIX - tristate "Unix domain sockets" - ---help--- - If you say Y here, you will include support for Unix domain sockets; - sockets are the standard Unix mechanism for establishing and - accessing network connections. Many commonly used programs such as - the X Window system and syslog use these sockets even if your - machine is not connected to any network. Unless you are working on - an embedded system or something similar, you therefore definitely - want to say Y here. - - To compile this driver as a module, choose M here: the module will be - called unix. Note that several important services won't work - correctly if you say M here and then neglect to load the module. - - Say Y unless you know what you are doing. - -config NET_KEY - tristate "PF_KEY sockets" - select XFRM - ---help--- - PF_KEYv2 socket family, compatible to KAME ones. - They are required if you are going to use IPsec tools ported - from KAME. +menu "Networking options" - Say Y unless you know what you are doing. +source "net/packet/Kconfig" +source "net/unix/Kconfig" +source "net/xfrm/Kconfig" config INET bool "TCP/IP networking" @@ -96,30 +53,12 @@ config INET Short answer: say Y. +if INET source "net/ipv4/Kconfig" - -# IPv6 as module will cause a CRASH if you try to unload it -config IPV6 - tristate "The IPv6 protocol" - depends on INET - default m - select CRYPTO if IPV6_PRIVACY - select CRYPTO_MD5 if IPV6_PRIVACY - ---help--- - This is complemental support for the IP version 6. - You will still be able to do traditional IPv4 networking as well. - - For general information about IPv6, see - . - For Linux IPv6 development information, see . - For specific information about IPv6 under Linux, read the HOWTO at - . - - To compile this protocol support as a module, choose M here: the - module will be called ipv6. - source "net/ipv6/Kconfig" +endif # if INET + menuconfig NETFILTER bool "Network packet filtering (replaces ipchains)" ---help--- @@ -208,269 +147,16 @@ source "net/bridge/netfilter/Kconfig" endif -config XFRM - bool - depends on NET - -source "net/xfrm/Kconfig" - source "net/sctp/Kconfig" - -config ATM - tristate "Asynchronous Transfer Mode (ATM) (EXPERIMENTAL)" - depends on EXPERIMENTAL - ---help--- - ATM is a high-speed networking technology for Local Area Networks - and Wide Area Networks. It uses a fixed packet size and is - connection oriented, allowing for the negotiation of minimum - bandwidth requirements. - - In order to participate in an ATM network, your Linux box needs an - ATM networking card. If you have that, say Y here and to the driver - of your ATM card below. - - Note that you need a set of user-space programs to actually make use - of ATM. See the file for - further details. - -config ATM_CLIP - tristate "Classical IP over ATM (EXPERIMENTAL)" - depends on ATM && INET - help - Classical IP over ATM for PVCs and SVCs, supporting InARP and - ATMARP. If you want to communication with other IP hosts on your ATM - network, you will typically either say Y here or to "LAN Emulation - (LANE)" below. - -config ATM_CLIP_NO_ICMP - bool "Do NOT send ICMP if no neighbour (EXPERIMENTAL)" - depends on ATM_CLIP - help - Normally, an "ICMP host unreachable" message is sent if a neighbour - cannot be reached because there is no VC to it in the kernel's - ATMARP table. This may cause problems when ATMARP table entries are - briefly removed during revalidation. If you say Y here, packets to - such neighbours are silently discarded instead. - -config ATM_LANE - tristate "LAN Emulation (LANE) support (EXPERIMENTAL)" - depends on ATM - help - LAN Emulation emulates services of existing LANs across an ATM - network. Besides operating as a normal ATM end station client, Linux - LANE client can also act as an proxy client bridging packets between - ELAN and Ethernet segments. You need LANE if you want to try MPOA. - -config ATM_MPOA - tristate "Multi-Protocol Over ATM (MPOA) support (EXPERIMENTAL)" - depends on ATM && INET && ATM_LANE!=n - help - Multi-Protocol Over ATM allows ATM edge devices such as routers, - bridges and ATM attached hosts establish direct ATM VCs across - subnetwork boundaries. These shortcut connections bypass routers - enhancing overall network performance. - -config ATM_BR2684 - tristate "RFC1483/2684 Bridged protocols" - depends on ATM && INET - help - ATM PVCs can carry ethernet PDUs according to RFC2684 (formerly 1483) - This device will act like an ethernet from the kernels point of view, - with the traffic being carried by ATM PVCs (currently 1 PVC/device). - This is sometimes used over DSL lines. If in doubt, say N. - -config ATM_BR2684_IPFILTER - bool "Per-VC IP filter kludge" - depends on ATM_BR2684 - help - This is an experimental mechanism for users who need to terminate a - large number of IP-only vcc's. Do not enable this unless you are sure - you know what you are doing. - -config BRIDGE - tristate "802.1d Ethernet Bridging" - ---help--- - If you say Y here, then your Linux box will be able to act as an - Ethernet bridge, which means that the different Ethernet segments it - is connected to will appear as one Ethernet to the participants. - Several such bridges can work together to create even larger - networks of Ethernets using the IEEE 802.1 spanning tree algorithm. - As this is a standard, Linux bridges will cooperate properly with - other third party bridge products. - - In order to use the Ethernet bridge, you'll need the bridge - configuration tools; see - for location. Please read the Bridge mini-HOWTO for more - information. - - If you enable iptables support along with the bridge support then you - turn your bridge into a bridging IP firewall. - iptables will then see the IP packets being bridged, so you need to - take this into account when setting up your firewall rules. - Enabling arptables support when bridging will let arptables see - bridged ARP traffic in the arptables FORWARD chain. - - To compile this code as a module, choose M here: the module - will be called bridge. - - If unsure, say N. - -config VLAN_8021Q - tristate "802.1Q VLAN Support" - ---help--- - Select this and you will be able to create 802.1Q VLAN interfaces - on your ethernet interfaces. 802.1Q VLAN supports almost - everything a regular ethernet interface does, including - firewalling, bridging, and of course IP traffic. You will need - the 'vconfig' tool from the VLAN project in order to effectively - use VLANs. See the VLAN web page for more information: - - - To compile this code as a module, choose M here: the module - will be called 8021q. - - If unsure, say N. - -config DECNET - tristate "DECnet Support" - ---help--- - The DECnet networking protocol was used in many products made by - Digital (now Compaq). It provides reliable stream and sequenced - packet communications over which run a variety of services similar - to those which run over TCP/IP. - - To find some tools to use with the kernel layer support, please - look at Patrick Caulfield's web site: - . - - More detailed documentation is available in - . - - Be sure to say Y to "/proc file system support" and "Sysctl support" - below when using DECnet, since you will need sysctl support to aid - in configuration at run time. - - The DECnet code is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module is called decnet. - +source "net/atm/Kconfig" +source "net/bridge/Kconfig" +source "net/8021q/Kconfig" source "net/decnet/Kconfig" - source "net/llc/Kconfig" - -config IPX - tristate "The IPX protocol" - select LLC - ---help--- - This is support for the Novell networking protocol, IPX, commonly - used for local networks of Windows machines. You need it if you - want to access Novell NetWare file or print servers using the Linux - Novell client ncpfs (available from - ) or from - within the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, - available from ). In order - to do the former, you'll also have to say Y to "NCP file system - support", below. - - IPX is similar in scope to IP, while SPX, which runs on top of IPX, - is similar to TCP. There is also experimental support for SPX in - Linux (see "SPX networking", below). - - To turn your Linux box into a fully featured NetWare file server and - IPX router, say Y here and fetch either lwared from - or - mars_nwe from . For more - information, read the IPX-HOWTO available from - . - - General information about how to connect Linux, Windows machines and - Macs is on the WWW at . - - The IPX driver would enlarge your kernel by about 16 KB. To compile - this driver as a module, choose M here: the module will be called ipx. - Unless you want to integrate your Linux box with a local Novell - network, say N. - source "net/ipx/Kconfig" - -config ATALK - tristate "Appletalk protocol support" - select LLC - ---help--- - AppleTalk is the protocol that Apple computers can use to communicate - on a network. If your Linux box is connected to such a network and you - wish to connect to it, say Y. You will need to use the netatalk package - so that your Linux box can act as a print and file server for Macs as - well as access AppleTalk printers. Check out - on the WWW for details. - EtherTalk is the name used for AppleTalk over Ethernet and the - cheaper and slower LocalTalk is AppleTalk over a proprietary Apple - network using serial links. EtherTalk and LocalTalk are fully - supported by Linux. - - General information about how to connect Linux, Windows machines and - Macs is on the WWW at . The - NET-3-HOWTO, available from - , contains valuable - information as well. - - To compile this driver as a module, choose M here: the module will be - called appletalk. You almost certainly want to compile it as a - module so you can restart your AppleTalk stack without rebooting - your machine. I hear that the GNU boycott of Apple is over, so - even politically correct people are allowed to say Y here. - source "drivers/net/appletalk/Kconfig" - -config X25 - tristate "CCITT X.25 Packet Layer (EXPERIMENTAL)" - depends on EXPERIMENTAL - ---help--- - X.25 is a set of standardized network protocols, similar in scope to - frame relay; the one physical line from your box to the X.25 network - entry point can carry several logical point-to-point connections - (called "virtual circuits") to other computers connected to the X.25 - network. Governments, banks, and other organizations tend to use it - to connect to each other or to form Wide Area Networks (WANs). Many - countries have public X.25 networks. X.25 consists of two - protocols: the higher level Packet Layer Protocol (PLP) (say Y here - if you want that) and the lower level data link layer protocol LAPB - (say Y to "LAPB Data Link Driver" below if you want that). - - You can read more about X.25 at and - . - Information about X.25 for Linux is contained in the files - and - . - - One connects to an X.25 network either with a dedicated network card - using the X.21 protocol (not yet supported by Linux) or one can do - X.25 over a standard telephone line using an ordinary modem (say Y - to "X.25 async driver" below) or over Ethernet using an ordinary - Ethernet card and the LAPB over Ethernet (say Y to "LAPB Data Link - Driver" and "LAPB over Ethernet driver" below). - - To compile this driver as a module, choose M here: the module - will be called x25. If unsure, say N. - -config LAPB - tristate "LAPB Data Link Driver (EXPERIMENTAL)" - depends on EXPERIMENTAL - ---help--- - Link Access Procedure, Balanced (LAPB) is the data link layer (i.e. - the lower) part of the X.25 protocol. It offers a reliable - connection service to exchange data frames with one other host, and - it is used to transport higher level protocols (mostly X.25 Packet - Layer, the higher part of X.25, but others are possible as well). - Usually, LAPB is used with specialized X.21 network cards, but Linux - currently supports LAPB only over Ethernet connections. If you want - to use LAPB connections over Ethernet, say Y here and to "LAPB over - Ethernet driver" below. Read - for technical - details. - - To compile this driver as a module, choose M here: the - module will be called lapb. If unsure, say N. +source "net/x25/Kconfig" +source "net/lapb/Kconfig" config NET_DIVERT bool "Frame Diverter (EXPERIMENTAL)" @@ -498,107 +184,10 @@ config NET_DIVERT If unsure, say N. -config ECONET - tristate "Acorn Econet/AUN protocols (EXPERIMENTAL)" - depends on EXPERIMENTAL && INET - ---help--- - Econet is a fairly old and slow networking protocol mainly used by - Acorn computers to access file and print servers. It uses native - Econet network cards. AUN is an implementation of the higher level - parts of Econet that runs over ordinary Ethernet connections, on - top of the UDP packet protocol, which in turn runs on top of the - Internet protocol IP. - - If you say Y here, you can choose with the next two options whether - to send Econet/AUN traffic over a UDP Ethernet connection or over - a native Econet network card. - - To compile this driver as a module, choose M here: the module - will be called econet. - -config ECONET_AUNUDP - bool "AUN over UDP" - depends on ECONET - help - Say Y here if you want to send Econet/AUN traffic over a UDP - connection (UDP is a packet based protocol that runs on top of the - Internet protocol IP) using an ordinary Ethernet network card. - -config ECONET_NATIVE - bool "Native Econet" - depends on ECONET - help - Say Y here if you have a native Econet network card installed in - your computer. - -config WAN_ROUTER - tristate "WAN router" - depends on EXPERIMENTAL - ---help--- - Wide Area Networks (WANs), such as X.25, frame relay and leased - lines, are used to interconnect Local Area Networks (LANs) over vast - distances with data transfer rates significantly higher than those - achievable with commonly used asynchronous modem connections. - Usually, a quite expensive external device called a `WAN router' is - needed to connect to a WAN. - - As an alternative, WAN routing can be built into the Linux kernel. - With relatively inexpensive WAN interface cards available on the - market, a perfectly usable router can be built for less than half - the price of an external router. If you have one of those cards and - wish to use your Linux box as a WAN router, say Y here and also to - the WAN driver for your card, below. You will then need the - wan-tools package which is available from . - Read for more - information. - - To compile WAN routing support as a module, choose M here: the - module will be called wanrouter. - - If unsure, say N. - -menu "QoS and/or fair queueing" - -config NET_SCHED - bool "QoS and/or fair queueing" - ---help--- - When the kernel has several packets to send out over a network - device, it has to decide which ones to send first, which ones to - delay, and which ones to drop. This is the job of the packet - scheduler, and several different algorithms for how to do this - "fairly" have been proposed. - - If you say N here, you will get the standard packet scheduler, which - is a FIFO (first come, first served). If you say Y here, you will be - able to choose from among several alternative algorithms which can - then be attached to different network devices. This is useful for - example if some of your network devices are real time devices that - need a certain minimum data flow rate, or if you need to limit the - maximum data flow rate for traffic which matches specified criteria. - This code is considered to be experimental. - - To administer these schedulers, you'll need the user-level utilities - from the package iproute2+tc at . - That package also contains some documentation; for more, check out - . - - This Quality of Service (QoS) support will enable you to use - Differentiated Services (diffserv) and Resource Reservation Protocol - (RSVP) on your Linux router if you also say Y to "QoS support", - "Packet classifier API" and to some classifiers below. Documentation - and software is at . - - If you say Y here and to "/proc file system" below, you will be able - to read status information about packet schedulers from the file - /proc/net/psched. - - The available schedulers are listed in the following questions; you - can say Y to as many as you like. If unsure, say N now. - +source "net/econet/Kconfig" +source "net/wanrouter/Kconfig" source "net/sched/Kconfig" -endmenu - menu "Network testing" config NET_PKTGEN @@ -637,10 +226,9 @@ config NET_POLL_CONTROLLER def_bool NETPOLL source "net/ax25/Kconfig" - source "net/irda/Kconfig" - source "net/bluetooth/Kconfig" +endif # if NET endmenu # Networking diff --git a/net/atm/Kconfig b/net/atm/Kconfig new file mode 100644 index 000000000000..bea2426229b1 --- /dev/null +++ b/net/atm/Kconfig @@ -0,0 +1,74 @@ +# +# Asynchronous Transfer Mode (ATM) (EXPERIMENTAL) +# + +config ATM + tristate "Asynchronous Transfer Mode (ATM) (EXPERIMENTAL)" + depends on EXPERIMENTAL + ---help--- + ATM is a high-speed networking technology for Local Area Networks + and Wide Area Networks. It uses a fixed packet size and is + connection oriented, allowing for the negotiation of minimum + bandwidth requirements. + + In order to participate in an ATM network, your Linux box needs an + ATM networking card. If you have that, say Y here and to the driver + of your ATM card below. + + Note that you need a set of user-space programs to actually make use + of ATM. See the file for + further details. + +config ATM_CLIP + tristate "Classical IP over ATM (EXPERIMENTAL)" + depends on ATM && INET + help + Classical IP over ATM for PVCs and SVCs, supporting InARP and + ATMARP. If you want to communication with other IP hosts on your ATM + network, you will typically either say Y here or to "LAN Emulation + (LANE)" below. + +config ATM_CLIP_NO_ICMP + bool "Do NOT send ICMP if no neighbour (EXPERIMENTAL)" + depends on ATM_CLIP + help + Normally, an "ICMP host unreachable" message is sent if a neighbour + cannot be reached because there is no VC to it in the kernel's + ATMARP table. This may cause problems when ATMARP table entries are + briefly removed during revalidation. If you say Y here, packets to + such neighbours are silently discarded instead. + +config ATM_LANE + tristate "LAN Emulation (LANE) support (EXPERIMENTAL)" + depends on ATM + help + LAN Emulation emulates services of existing LANs across an ATM + network. Besides operating as a normal ATM end station client, Linux + LANE client can also act as an proxy client bridging packets between + ELAN and Ethernet segments. You need LANE if you want to try MPOA. + +config ATM_MPOA + tristate "Multi-Protocol Over ATM (MPOA) support (EXPERIMENTAL)" + depends on ATM && INET && ATM_LANE!=n + help + Multi-Protocol Over ATM allows ATM edge devices such as routers, + bridges and ATM attached hosts establish direct ATM VCs across + subnetwork boundaries. These shortcut connections bypass routers + enhancing overall network performance. + +config ATM_BR2684 + tristate "RFC1483/2684 Bridged protocols" + depends on ATM && INET + help + ATM PVCs can carry ethernet PDUs according to rfc2684 (formerly 1483) + This device will act like an ethernet from the kernels point of view, + with the traffic being carried by ATM PVCs (currently 1 PVC/device). + This is sometimes used over DSL lines. If in doubt, say N. + +config ATM_BR2684_IPFILTER + bool "Per-VC IP filter kludge" + depends on ATM_BR2684 + help + This is an experimental mechanism for users who need to terminating a + large number of IP-only vcc's. Do not enable this unless you are sure + you know what you are doing. diff --git a/net/bridge/Kconfig b/net/bridge/Kconfig new file mode 100644 index 000000000000..db23d59746cf --- /dev/null +++ b/net/bridge/Kconfig @@ -0,0 +1,31 @@ +# +# 802.1d Ethernet Bridging +# + +config BRIDGE + tristate "802.1d Ethernet Bridging" + ---help--- + If you say Y here, then your Linux box will be able to act as an + Ethernet bridge, which means that the different Ethernet segments it + is connected to will appear as one Ethernet to the participants. + Several such bridges can work together to create even larger + networks of Ethernets using the IEEE 802.1 spanning tree algorithm. + As this is a standard, Linux bridges will cooperate properly with + other third party bridge products. + + In order to use the Ethernet bridge, you'll need the bridge + configuration tools; see + for location. Please read the Bridge mini-HOWTO for more + information. + + If you enable iptables support along with the bridge support then you + turn your bridge into a bridging IP firewall. + iptables will then see the IP packets being bridged, so you need to + take this into account when setting up your firewall rules. + Enabling arptables support when bridging will let arptables see + bridged ARP traffic in the arptables FORWARD chain. + + To compile this code as a module, choose M here: the module + will be called bridge. + + If unsure, say N. diff --git a/net/decnet/Kconfig b/net/decnet/Kconfig index 2101da542ba8..92f2ec46fd22 100644 --- a/net/decnet/Kconfig +++ b/net/decnet/Kconfig @@ -1,6 +1,29 @@ # # DECnet configuration # +config DECNET + tristate "DECnet Support" + ---help--- + The DECnet networking protocol was used in many products made by + Digital (now Compaq). It provides reliable stream and sequenced + packet communications over which run a variety of services similar + to those which run over TCP/IP. + + To find some tools to use with the kernel layer support, please + look at Patrick Caulfield's web site: + . + + More detailed documentation is available in + . + + Be sure to say Y to "/proc file system support" and "Sysctl support" + below when using DECnet, since you will need sysctl support to aid + in configuration at run time. + + The DECnet code is also available as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module is called decnet. + config DECNET_ROUTER bool "DECnet: router support (EXPERIMENTAL)" depends on DECNET && EXPERIMENTAL diff --git a/net/econet/Kconfig b/net/econet/Kconfig new file mode 100644 index 000000000000..39a2d2975e0e --- /dev/null +++ b/net/econet/Kconfig @@ -0,0 +1,36 @@ +# +# Acorn Econet/AUN protocols +# + +config ECONET + tristate "Acorn Econet/AUN protocols (EXPERIMENTAL)" + depends on EXPERIMENTAL && INET + ---help--- + Econet is a fairly old and slow networking protocol mainly used by + Acorn computers to access file and print servers. It uses native + Econet network cards. AUN is an implementation of the higher level + parts of Econet that runs over ordinary Ethernet connections, on + top of the UDP packet protocol, which in turn runs on top of the + Internet protocol IP. + + If you say Y here, you can choose with the next two options whether + to send Econet/AUN traffic over a UDP Ethernet connection or over + a native Econet network card. + + To compile this driver as a module, choose M here: the module + will be called econet. + +config ECONET_AUNUDP + bool "AUN over UDP" + depends on ECONET + help + Say Y here if you want to send Econet/AUN traffic over a UDP + connection (UDP is a packet based protocol that runs on top of the + Internet protocol IP) using an ordinary Ethernet network card. + +config ECONET_NATIVE + bool "Native Econet" + depends on ECONET + help + Say Y here if you have a native Econet network card installed in + your computer. diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index 3e63123f7bbd..df5386885a90 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -3,7 +3,6 @@ # config IP_MULTICAST bool "IP: multicasting" - depends on INET help This is code for addressing several networked computers at once, enlarging your kernel by about 2 KB. You need multicasting if you @@ -17,7 +16,6 @@ config IP_MULTICAST config IP_ADVANCED_ROUTER bool "IP: advanced router" - depends on INET ---help--- If you intend to run your Linux box mostly as a router, i.e. as a computer that forwards and redistributes network packets, say Y; you @@ -183,7 +181,6 @@ config IP_ROUTE_VERBOSE config IP_PNP bool "IP: kernel level autoconfiguration" - depends on INET help This enables automatic configuration of IP addresses of devices and of the routing table during kernel boot, based on either information @@ -242,7 +239,6 @@ config IP_PNP_RARP # bool ' IP: ARP support' CONFIG_IP_PNP_ARP config NET_IPIP tristate "IP: tunneling" - depends on INET select INET_TUNNEL ---help--- Tunneling means encapsulating data of one protocol type within @@ -260,7 +256,6 @@ config NET_IPIP config NET_IPGRE tristate "IP: GRE tunnels over IP" - depends on INET select XFRM help Tunneling means encapsulating data of one protocol type within @@ -319,7 +314,7 @@ config IP_PIMSM_V2 config ARPD bool "IP: ARP daemon support (EXPERIMENTAL)" - depends on INET && EXPERIMENTAL + depends on EXPERIMENTAL ---help--- Normally, the kernel maintains an internal cache which maps IP addresses to hardware addresses on the local network, so that @@ -344,7 +339,6 @@ config ARPD config SYN_COOKIES bool "IP: TCP syncookie support (disabled per default)" - depends on INET ---help--- Normal TCP/IP networking is open to an attack known as "SYN flooding". This denial-of-service attack prevents legitimate remote @@ -381,7 +375,6 @@ config SYN_COOKIES config INET_AH tristate "IP: AH transformation" - depends on INET select XFRM select CRYPTO select CRYPTO_HMAC @@ -394,7 +387,6 @@ config INET_AH config INET_ESP tristate "IP: ESP transformation" - depends on INET select XFRM select CRYPTO select CRYPTO_HMAC @@ -408,7 +400,6 @@ config INET_ESP config INET_IPCOMP tristate "IP: IPComp transformation" - depends on INET select XFRM select INET_TUNNEL select CRYPTO @@ -421,7 +412,6 @@ config INET_IPCOMP config INET_TUNNEL tristate "IP: tunnel transformation" - depends on INET select XFRM ---help--- Support for generic IP tunnel transformation, which is required by @@ -431,7 +421,6 @@ config INET_TUNNEL config IP_TCPDIAG tristate "IP: TCP socket monitoring interface" - depends on INET default y ---help--- Support for TCP socket monitoring interface used by native Linux @@ -447,7 +436,6 @@ config IP_TCPDIAG_IPV6 config TCP_CONG_ADVANCED bool "TCP: advanced congestion control" - depends on INET ---help--- Support for selection of various TCP congestion control modules. @@ -463,7 +451,6 @@ menu "TCP congestion control" config TCP_CONG_BIC tristate "Binary Increase Congestion (BIC) control" - depends on INET default y ---help--- BIC-TCP is a sender-side only change that ensures a linear RTT @@ -478,7 +465,6 @@ config TCP_CONG_BIC config TCP_CONG_WESTWOOD tristate "TCP Westwood+" - depends on INET default m ---help--- TCP Westwood+ is a sender-side only modification of the TCP Reno @@ -493,7 +479,6 @@ config TCP_CONG_WESTWOOD config TCP_CONG_HTCP tristate "H-TCP" - depends on INET default m ---help--- H-TCP is a send-side only modifications of the TCP Reno @@ -505,7 +490,7 @@ config TCP_CONG_HTCP config TCP_CONG_HSTCP tristate "High Speed TCP" - depends on INET && EXPERIMENTAL + depends on EXPERIMENTAL default n ---help--- Sally Floyd's High Speed TCP (RFC 3649) congestion control. @@ -516,7 +501,7 @@ config TCP_CONG_HSTCP config TCP_CONG_HYBLA tristate "TCP-Hybla congestion control algorithm" - depends on INET && EXPERIMENTAL + depends on EXPERIMENTAL default n ---help--- TCP-Hybla is a sender-side only change that eliminates penalization of @@ -526,7 +511,7 @@ config TCP_CONG_HYBLA config TCP_CONG_VEGAS tristate "TCP Vegas" - depends on INET && EXPERIMENTAL + depends on EXPERIMENTAL default n ---help--- TCP Vegas is a sender-side only change to TCP that anticipates @@ -537,7 +522,7 @@ config TCP_CONG_VEGAS config TCP_CONG_SCALABLE tristate "Scalable TCP" - depends on INET && EXPERIMENTAL + depends on EXPERIMENTAL default n ---help--- Scalable TCP is a sender-side only change to TCP which uses a diff --git a/net/ipv4/ipvs/Kconfig b/net/ipv4/ipvs/Kconfig index 63a82b4b64bb..c9820bfc493a 100644 --- a/net/ipv4/ipvs/Kconfig +++ b/net/ipv4/ipvs/Kconfig @@ -2,11 +2,11 @@ # IP Virtual Server configuration # menu "IP: Virtual Server Configuration" - depends on INET && NETFILTER + depends on NETFILTER config IP_VS tristate "IP virtual server support (EXPERIMENTAL)" - depends on INET && NETFILTER + depends on NETFILTER ---help--- IP Virtual Server support will let you build a high-performance virtual server based on cluster of two or more real servers. This diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig index e66ca9381cfd..95163cd52ae0 100644 --- a/net/ipv6/Kconfig +++ b/net/ipv6/Kconfig @@ -1,6 +1,26 @@ # # IPv6 configuration -# +# + +# IPv6 as module will cause a CRASH if you try to unload it +config IPV6 + tristate "The IPv6 protocol" + default m + select CRYPTO if IPV6_PRIVACY + select CRYPTO_MD5 if IPV6_PRIVACY + ---help--- + This is complemental support for the IP version 6. + You will still be able to do traditional IPv4 networking as well. + + For general information about IPv6, see + . + For Linux IPv6 development information, see . + For specific information about IPv6 under Linux, read the HOWTO at + . + + To compile this protocol support as a module, choose M here: the + module will be called ipv6. + config IPV6_PRIVACY bool "IPv6: Privacy Extensions (RFC 3041) support" depends on IPV6 diff --git a/net/ipx/Kconfig b/net/ipx/Kconfig index a16237c0e783..980a826f5d02 100644 --- a/net/ipx/Kconfig +++ b/net/ipx/Kconfig @@ -1,6 +1,39 @@ # # IPX configuration # +config IPX + tristate "The IPX protocol" + select LLC + ---help--- + This is support for the Novell networking protocol, IPX, commonly + used for local networks of Windows machines. You need it if you + want to access Novell NetWare file or print servers using the Linux + Novell client ncpfs (available from + ) or from + within the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, + available from ). In order + to do the former, you'll also have to say Y to "NCP file system + support", below. + + IPX is similar in scope to IP, while SPX, which runs on top of IPX, + is similar to TCP. There is also experimental support for SPX in + Linux (see "SPX networking", below). + + To turn your Linux box into a fully featured NetWare file server and + IPX router, say Y here and fetch either lwared from + or + mars_nwe from . For more + information, read the IPX-HOWTO available from + . + + General information about how to connect Linux, Windows machines and + Macs is on the WWW at . + + The IPX driver would enlarge your kernel by about 16 KB. To compile + this driver as a module, choose M here: the module will be called ipx. + Unless you want to integrate your Linux box with a local Novell + network, say N. + config IPX_INTERN bool "IPX: Full internal IPX network" depends on IPX diff --git a/net/lapb/Kconfig b/net/lapb/Kconfig new file mode 100644 index 000000000000..f0b5efb31a00 --- /dev/null +++ b/net/lapb/Kconfig @@ -0,0 +1,22 @@ +# +# LAPB Data Link Drive +# + +config LAPB + tristate "LAPB Data Link Driver (EXPERIMENTAL)" + depends on EXPERIMENTAL + ---help--- + Link Access Procedure, Balanced (LAPB) is the data link layer (i.e. + the lower) part of the X.25 protocol. It offers a reliable + connection service to exchange data frames with one other host, and + it is used to transport higher level protocols (mostly X.25 Packet + Layer, the higher part of X.25, but others are possible as well). + Usually, LAPB is used with specialized X.21 network cards, but Linux + currently supports LAPB only over Ethernet connections. If you want + to use LAPB connections over Ethernet, say Y here and to "LAPB over + Ethernet driver" below. Read + for technical + details. + + To compile this driver as a module, choose M here: the + module will be called lapb. If unsure, say N. diff --git a/net/packet/Kconfig b/net/packet/Kconfig new file mode 100644 index 000000000000..34ff93ff894d --- /dev/null +++ b/net/packet/Kconfig @@ -0,0 +1,26 @@ +# +# Packet configuration +# + +config PACKET + tristate "Packet socket" + ---help--- + The Packet protocol is used by applications which communicate + directly with network devices without an intermediate network + protocol implemented in the kernel, e.g. tcpdump. If you want them + to work, choose Y. + + To compile this driver as a module, choose M here: the module will + be called af_packet. + + If unsure, say Y. + +config PACKET_MMAP + bool "Packet socket: mmapped IO" + depends on PACKET + help + If you say Y here, the Packet protocol driver will use an IO + mechanism that results in faster communication. + + If unsure, say N. + diff --git a/net/sched/Kconfig b/net/sched/Kconfig index 7bac249258e3..59d3e71f8b85 100644 --- a/net/sched/Kconfig +++ b/net/sched/Kconfig @@ -1,6 +1,43 @@ # # Traffic control configuration. # + +menuconfig NET_SCHED + bool "QoS and/or fair queueing" + ---help--- + When the kernel has several packets to send out over a network + device, it has to decide which ones to send first, which ones to + delay, and which ones to drop. This is the job of the packet + scheduler, and several different algorithms for how to do this + "fairly" have been proposed. + + If you say N here, you will get the standard packet scheduler, which + is a FIFO (first come, first served). If you say Y here, you will be + able to choose from among several alternative algorithms which can + then be attached to different network devices. This is useful for + example if some of your network devices are real time devices that + need a certain minimum data flow rate, or if you need to limit the + maximum data flow rate for traffic which matches specified criteria. + This code is considered to be experimental. + + To administer these schedulers, you'll need the user-level utilities + from the package iproute2+tc at . + That package also contains some documentation; for more, check out + . + + This Quality of Service (QoS) support will enable you to use + Differentiated Services (diffserv) and Resource Reservation Protocol + (RSVP) on your Linux router if you also say Y to "QoS support", + "Packet classifier API" and to some classifiers below. Documentation + and software is at . + + If you say Y here and to "/proc file system" below, you will be able + to read status information about packet schedulers from the file + /proc/net/psched. + + The available schedulers are listed in the following questions; you + can say Y to as many as you like. If unsure, say N now. + choice prompt "Packet scheduler clock source" depends on NET_SCHED diff --git a/net/unix/Kconfig b/net/unix/Kconfig new file mode 100644 index 000000000000..5a69733bcdad --- /dev/null +++ b/net/unix/Kconfig @@ -0,0 +1,21 @@ +# +# Unix Domain Sockets +# + +config UNIX + tristate "Unix domain sockets" + ---help--- + If you say Y here, you will include support for Unix domain sockets; + sockets are the standard Unix mechanism for establishing and + accessing network connections. Many commonly used programs such as + the X Window system and syslog use these sockets even if your + machine is not connected to any network. Unless you are working on + an embedded system or something similar, you therefore definitely + want to say Y here. + + To compile this driver as a module, choose M here: the module will be + called unix. Note that several important services won't work + correctly if you say M here and then neglect to load the module. + + Say Y unless you know what you are doing. + diff --git a/net/wanrouter/Kconfig b/net/wanrouter/Kconfig new file mode 100644 index 000000000000..1debe1cb054e --- /dev/null +++ b/net/wanrouter/Kconfig @@ -0,0 +1,29 @@ +# +# Configuration for WAN router +# + +config WAN_ROUTER + tristate "WAN router" + depends on EXPERIMENTAL + ---help--- + Wide Area Networks (WANs), such as X.25, frame relay and leased + lines, are used to interconnect Local Area Networks (LANs) over vast + distances with data transfer rates significantly higher than those + achievable with commonly used asynchronous modem connections. + Usually, a quite expensive external device called a `WAN router' is + needed to connect to a WAN. + + As an alternative, WAN routing can be built into the Linux kernel. + With relatively inexpensive WAN interface cards available on the + market, a perfectly usable router can be built for less than half + the price of an external router. If you have one of those cards and + wish to use your Linux box as a WAN router, say Y here and also to + the WAN driver for your card, below. You will then need the + wan-tools package which is available from . + Read for more + information. + + To compile WAN routing support as a module, choose M here: the + module will be called wanrouter. + + If unsure, say N. diff --git a/net/x25/Kconfig b/net/x25/Kconfig new file mode 100644 index 000000000000..e6759c9660bb --- /dev/null +++ b/net/x25/Kconfig @@ -0,0 +1,36 @@ +# +# CCITT X.25 Packet Layer +# + +config X25 + tristate "CCITT X.25 Packet Layer (EXPERIMENTAL)" + depends on EXPERIMENTAL + ---help--- + X.25 is a set of standardized network protocols, similar in scope to + frame relay; the one physical line from your box to the X.25 network + entry point can carry several logical point-to-point connections + (called "virtual circuits") to other computers connected to the X.25 + network. Governments, banks, and other organizations tend to use it + to connect to each other or to form Wide Area Networks (WANs). Many + countries have public X.25 networks. X.25 consists of two + protocols: the higher level Packet Layer Protocol (PLP) (say Y here + if you want that) and the lower level data link layer protocol LAPB + (say Y to "LAPB Data Link Driver" below if you want that). + + You can read more about X.25 at and + . + Information about X.25 for Linux is contained in the files + and + . + + One connects to an X.25 network either with a dedicated network card + using the X.21 protocol (not yet supported by Linux) or one can do + X.25 over a standard telephone line using an ordinary modem (say Y + to "X.25 async driver" below) or over Ethernet using an ordinary + Ethernet card and the LAPB over Ethernet (say Y to "LAPB Data Link + Driver" and "LAPB over Ethernet driver" below). + + To compile this driver as a module, choose M here: the module + will be called x25. If unsure, say N. + + diff --git a/net/xfrm/Kconfig b/net/xfrm/Kconfig index 58ca6a972c48..0c1c04322baf 100644 --- a/net/xfrm/Kconfig +++ b/net/xfrm/Kconfig @@ -1,6 +1,10 @@ # # XFRM configuration # +config XFRM + bool + depends on NET + config XFRM_USER tristate "IPsec user configuration interface" depends on INET && XFRM @@ -10,3 +14,14 @@ config XFRM_USER If unsure, say Y. +config NET_KEY + tristate "PF_KEY sockets" + select XFRM + ---help--- + PF_KEYv2 socket family, compatible to KAME ones. + They are required if you are going to use IPsec tools ported + from KAME. + + Say Y unless you know what you are doing. + +