From: Clifford Wolf Date: Tue, 17 Jul 2007 11:04:06 +0000 (-0700) Subject: spi_mpc83xx.c underclocking hotfix X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=698ca47e8dba93f4b001b06b4c7037b09ac6eb09;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git spi_mpc83xx.c underclocking hotfix The MPC83xx SPI controller clock divider can divide the system clock by not more then 1024. The spi_mpc83xx driver does not check this and silently writes garbage to the SPI controller registers when asked to run at lower frequencies. I've tried to run the SPI on a 266MHz MPC8349E with 100kHz for debugging a bus problem and suddenly was confronted with a 2nd problem to debug.. ;-) The patch adds an additional check which avoids writing garbage to the SPI controller registers and warn the user about it. This might help others to avoid simmilar problems. Cc: Kumar Gala Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c index 9cdbc12278e5..bbd51bc88a60 100644 --- a/drivers/spi/spi_mpc83xx.c +++ b/drivers/spi/spi_mpc83xx.c @@ -158,6 +158,12 @@ static void mpc83xx_spi_chipselect(struct spi_device *spi, int value) if ((mpc83xx_spi->sysclk / spi->max_speed_hz) >= 64) { u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 64); + if (pm > 0x0f) { + printk(KERN_WARNING "MPC83xx SPI: SPICLK can't be less then a SYSCLK/1024!\n" + "Requested SPICLK is %d Hz. Will use %d Hz instead.\n", + spi->max_speed_hz, mpc83xx_spi->sysclk / 1024); + pm = 0x0f; + } regval |= SPMODE_PM(pm) | SPMODE_DIV16; } else { u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 4);