From: Neerav Parikh <Neerav.Parikh@intel.com>
Date: Wed, 4 Jan 2012 20:23:39 +0000 (+0000)
Subject: netdev: FCoE: Add new ndo_get_fcoe_hbainfo() call
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=68bad94ed801d955535cb50dde3412944a24530c;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git

netdev: FCoE: Add new ndo_get_fcoe_hbainfo() call

This adds a new ndo_get_fcoe_hbainfo() call in
net_device_ops for FCoE protocol stack.

If supported by the underlying device, the FCoE protocol
stack will call this to get device specific information
from the underlying device.
This information will then be utilized by the FCoE protocol
stack to register Fiber Channel HBA attributes with the
Fiber Channel Management Service via Fabric Device
Management Interface (FDMI) as per the T11 FC-GS
specification.

Changes in v2:
- As per comments from David Miller aligning the parameters
of the ndo_get_fcoe_hbainfo()

Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index a776a675c0e5..a1d109590da4 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -707,6 +707,23 @@ struct netdev_tc_txq {
 	u16 offset;
 };
 
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+/*
+ * This structure is to hold information about the device
+ * configured to run FCoE protocol stack.
+ */
+struct netdev_fcoe_hbainfo {
+	char	manufacturer[64];
+	char	serial_number[64];
+	char	hardware_version[64];
+	char	driver_version[64];
+	char	optionrom_version[64];
+	char	firmware_version[64];
+	char	model[256];
+	char	model_description[256];
+};
+#endif
+
 /*
  * This structure defines the management hooks for network devices.
  * The following hooks can be defined; unless noted otherwise, they are
@@ -847,6 +864,13 @@ struct netdev_tc_txq {
  *	perform necessary setup and returns 1 to indicate the device is set up
  *	successfully to perform DDP on this I/O, otherwise this returns 0.
  *
+ * int (*ndo_fcoe_get_hbainfo)(struct net_device *dev,
+ *			       struct netdev_fcoe_hbainfo *hbainfo);
+ *	Called when the FCoE Protocol stack wants information on the underlying
+ *	device. This information is utilized by the FCoE protocol stack to
+ *	register attributes with Fiber Channel management service as per the
+ *	FC-GS Fabric Device Management Information(FDMI) specification.
+ *
  * int (*ndo_fcoe_get_wwn)(struct net_device *dev, u64 *wwn, int type);
  *	Called when the underlying device wants to override default World Wide
  *	Name (WWN) generation mechanism in FCoE protocol stack to pass its own
@@ -950,6 +974,8 @@ struct net_device_ops {
 						       u16 xid,
 						       struct scatterlist *sgl,
 						       unsigned int sgc);
+	int			(*ndo_fcoe_get_hbainfo)(struct net_device *dev,
+							struct netdev_fcoe_hbainfo *hbainfo);
 #endif
 
 #if IS_ENABLED(CONFIG_LIBFCOE)