From: Antti Palosaari Date: Tue, 23 Dec 2014 17:32:35 +0000 (-0300) Subject: [media] rtl28xxu: correct reg access routine name prefixes X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=670ef05f829bcbab1548f6cdc93d522723c56fd3;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git [media] rtl28xxu: correct reg access routine name prefixes Use rtl28xxu_ prefix for all register access routine names. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c index 23ded778053e..d88f7994bc7c 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c @@ -62,7 +62,7 @@ err: return ret; } -static int rtl28xx_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) +static int rtl28xxu_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) { struct rtl28xxu_req req; @@ -80,7 +80,7 @@ static int rtl28xx_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) return rtl28xxu_ctrl_msg(d, &req); } -static int rtl2831_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) +static int rtl28xxu_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) { struct rtl28xxu_req req; @@ -98,17 +98,17 @@ static int rtl2831_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) return rtl28xxu_ctrl_msg(d, &req); } -static int rtl28xx_wr_reg(struct dvb_usb_device *d, u16 reg, u8 val) +static int rtl28xxu_wr_reg(struct dvb_usb_device *d, u16 reg, u8 val) { - return rtl28xx_wr_regs(d, reg, &val, 1); + return rtl28xxu_wr_regs(d, reg, &val, 1); } -static int rtl28xx_rd_reg(struct dvb_usb_device *d, u16 reg, u8 *val) +static int rtl28xxu_rd_reg(struct dvb_usb_device *d, u16 reg, u8 *val) { - return rtl2831_rd_regs(d, reg, val, 1); + return rtl28xxu_rd_regs(d, reg, val, 1); } -static int rtl28xx_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val, +static int rtl28xxu_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val, u8 mask) { int ret; @@ -116,7 +116,7 @@ static int rtl28xx_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val, /* no need for read if whole reg is written */ if (mask != 0xff) { - ret = rtl28xx_rd_reg(d, reg, &tmp); + ret = rtl28xxu_rd_reg(d, reg, &tmp); if (ret) return ret; @@ -125,7 +125,7 @@ static int rtl28xx_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val, val |= tmp; } - return rtl28xx_wr_reg(d, reg, val); + return rtl28xxu_wr_reg(d, reg, val); } /* I2C */ @@ -274,12 +274,12 @@ static int rtl2831u_read_config(struct dvb_usb_device *d) */ /* GPIO direction */ - ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, 0x0a); + ret = rtl28xxu_wr_reg(d, SYS_GPIO_DIR, 0x0a); if (ret) goto err; /* enable as output GPIO0, GPIO2, GPIO4 */ - ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, 0x15); + ret = rtl28xxu_wr_reg(d, SYS_GPIO_OUT_EN, 0x15); if (ret) goto err; @@ -361,11 +361,11 @@ static int rtl2832u_read_config(struct dvb_usb_device *d) dev_dbg(&d->intf->dev, "\n"); /* enable GPIO3 and GPIO6 as output */ - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x40); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x40); if (ret) goto err; - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x48, 0x48); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x48, 0x48); if (ret) goto err; @@ -483,15 +483,15 @@ tuner_found: /* probe slave demod */ if (dev->tuner == TUNER_RTL2832_R828D) { /* power on MN88472 demod on GPIO0 */ - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x01, 0x01); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x01, 0x01); if (ret) goto err; - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x01); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x01); if (ret) goto err; - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x01, 0x01); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x01, 0x01); if (ret) goto err; @@ -679,7 +679,7 @@ static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d, switch (cmd) { case FC_FE_CALLBACK_VHF_ENABLE: /* set output values */ - ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val); + ret = rtl28xxu_rd_reg(d, SYS_GPIO_OUT_VAL, &val); if (ret) goto err; @@ -689,7 +689,7 @@ static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d, val |= 0x40; /* set GPIO6 high */ - ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val); + ret = rtl28xxu_wr_reg(d, SYS_GPIO_OUT_VAL, val); if (ret) goto err; break; @@ -724,7 +724,7 @@ static int rtl2832u_tua9001_tuner_callback(struct dvb_usb_device *d, else val = (0 << 4); - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x10); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x10); if (ret) goto err; break; @@ -734,7 +734,7 @@ static int rtl2832u_tua9001_tuner_callback(struct dvb_usb_device *d, else val = (0 << 1); - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x02); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x02); if (ret) goto err; break; @@ -1109,11 +1109,11 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) break; case TUNER_RTL2832_TUA9001: /* enable GPIO1 and GPIO4 as output */ - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x12); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x12); if (ret) goto err; - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x12, 0x12); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x12, 0x12); if (ret) goto err; @@ -1234,23 +1234,23 @@ static int rtl28xxu_init(struct dvb_usb_device *d) dev_dbg(&d->intf->dev, "\n"); /* init USB endpoints */ - ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val); + ret = rtl28xxu_rd_reg(d, USB_SYSCTL_0, &val); if (ret) goto err; /* enable DMA and Full Packet Mode*/ val |= 0x09; - ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val); + ret = rtl28xxu_wr_reg(d, USB_SYSCTL_0, val); if (ret) goto err; /* set EPA maximum packet size to 0x0200 */ - ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4); + ret = rtl28xxu_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4); if (ret) goto err; /* change EPA FIFO length */ - ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4); + ret = rtl28xxu_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4); if (ret) goto err; @@ -1268,12 +1268,12 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff) dev_dbg(&d->intf->dev, "onoff=%d\n", onoff); /* demod adc */ - ret = rtl28xx_rd_reg(d, SYS_SYS0, &sys0); + ret = rtl28xxu_rd_reg(d, SYS_SYS0, &sys0); if (ret) goto err; /* tuner power, read GPIOs */ - ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio); + ret = rtl28xxu_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio); if (ret) goto err; @@ -1299,17 +1299,17 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff) dev_dbg(&d->intf->dev, "WR SYS0=%02x GPIO_OUT_VAL=%02x\n", sys0, gpio); /* demod adc */ - ret = rtl28xx_wr_reg(d, SYS_SYS0, sys0); + ret = rtl28xxu_wr_reg(d, SYS_SYS0, sys0); if (ret) goto err; /* tuner power, write GPIOs */ - ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, gpio); + ret = rtl28xxu_wr_reg(d, SYS_GPIO_OUT_VAL, gpio); if (ret) goto err; /* streaming EP: stall & reset */ - ret = rtl28xx_wr_regs(d, USB_EPA_CTL, epa_ctl, 2); + ret = rtl28xxu_wr_regs(d, USB_EPA_CTL, epa_ctl, 2); if (ret) goto err; @@ -1330,27 +1330,27 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff) if (onoff) { /* GPIO3=1, GPIO4=0 */ - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x08, 0x18); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x08, 0x18); if (ret) goto err; /* suspend? */ - ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL1, 0x00, 0x10); + ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL1, 0x00, 0x10); if (ret) goto err; /* enable PLL */ - ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x80, 0x80); + ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL, 0x80, 0x80); if (ret) goto err; /* disable reset */ - ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x20, 0x20); + ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL, 0x20, 0x20); if (ret) goto err; /* streaming EP: clear stall & reset */ - ret = rtl28xx_wr_regs(d, USB_EPA_CTL, "\x00\x00", 2); + ret = rtl28xxu_wr_regs(d, USB_EPA_CTL, "\x00\x00", 2); if (ret) goto err; @@ -1359,17 +1359,17 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff) goto err; } else { /* GPIO4=1 */ - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x10, 0x10); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x10, 0x10); if (ret) goto err; /* disable PLL */ - ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x00, 0x80); + ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL, 0x00, 0x80); if (ret) goto err; /* streaming EP: set stall & reset */ - ret = rtl28xx_wr_regs(d, USB_EPA_CTL, "\x10\x02", 2); + ret = rtl28xxu_wr_regs(d, USB_EPA_CTL, "\x10\x02", 2); if (ret) goto err; } @@ -1409,7 +1409,7 @@ static int rtl28xxu_frontend_ctrl(struct dvb_frontend *fe, int onoff) else val = 0x00; /* disable ADC */ - ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, val, 0x48); + ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL, val, 0x48); if (ret) goto err; @@ -1453,7 +1453,7 @@ static int rtl2831u_rc_query(struct dvb_usb_device *d) /* init remote controller */ if (!dev->rc_active) { for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) { - ret = rtl28xx_wr_reg(d, rc_nec_tab[i].reg, + ret = rtl28xxu_wr_reg(d, rc_nec_tab[i].reg, rc_nec_tab[i].val); if (ret) goto err; @@ -1461,7 +1461,7 @@ static int rtl2831u_rc_query(struct dvb_usb_device *d) dev->rc_active = true; } - ret = rtl2831_rd_regs(d, SYS_IRRC_RP, buf, 5); + ret = rtl28xxu_rd_regs(d, SYS_IRRC_RP, buf, 5); if (ret) goto err; @@ -1483,12 +1483,12 @@ static int rtl2831u_rc_query(struct dvb_usb_device *d) rc_keydown(d->rc_dev, RC_TYPE_NEC, rc_code, 0); - ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1); + ret = rtl28xxu_wr_reg(d, SYS_IRRC_SR, 1); if (ret) goto err; /* repeated intentionally to avoid extra keypress */ - ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1); + ret = rtl28xxu_wr_reg(d, SYS_IRRC_SR, 1); if (ret) goto err; } @@ -1544,7 +1544,7 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d) }; for (i = 0; i < ARRAY_SIZE(init_tab); i++) { - ret = rtl28xx_wr_reg_mask(d, init_tab[i].reg, + ret = rtl28xxu_wr_reg_mask(d, init_tab[i].reg, init_tab[i].val, init_tab[i].mask); if (ret) goto err; @@ -1553,27 +1553,27 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d) dev->rc_active = true; } - ret = rtl28xx_rd_reg(d, IR_RX_IF, &buf[0]); + ret = rtl28xxu_rd_reg(d, IR_RX_IF, &buf[0]); if (ret) goto err; if (buf[0] != 0x83) goto exit; - ret = rtl28xx_rd_reg(d, IR_RX_BC, &buf[0]); + ret = rtl28xxu_rd_reg(d, IR_RX_BC, &buf[0]); if (ret) goto err; len = buf[0]; /* read raw code from hw */ - ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len); + ret = rtl28xxu_rd_regs(d, IR_RX_BUF, buf, len); if (ret) goto err; /* let hw receive new code */ for (i = 0; i < ARRAY_SIZE(refresh_tab); i++) { - ret = rtl28xx_wr_reg_mask(d, refresh_tab[i].reg, + ret = rtl28xxu_wr_reg_mask(d, refresh_tab[i].reg, refresh_tab[i].val, refresh_tab[i].mask); if (ret) goto err; @@ -1603,7 +1603,7 @@ static int rtl2832u_get_rc_config(struct dvb_usb_device *d, { /* disable IR interrupts in order to avoid SDR sample loss */ if (rtl28xxu_disable_rc) - return rtl28xx_wr_reg(d, IR_RX_IE, 0x00); + return rtl28xxu_wr_reg(d, IR_RX_IE, 0x00); /* load empty to enable rc */ if (!rc->map_name)