From: Duson Lin Date: Fri, 3 Oct 2014 20:24:27 +0000 (-0700) Subject: Input: add driver for Elan I2C/SMbus touchpad X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=6696777c6506fa52b2a0282121195843ed855be6;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git Input: add driver for Elan I2C/SMbus touchpad This driver supports Elan I2C/SMbus touchpads found in some laptops and also in many Chromebooks. Signed-off-by: Duson Lin Reviewed-by: Benson Leung Signed-off-by: Dmitry Torokhov --- diff --git a/Documentation/devicetree/bindings/input/elan_i2c.txt b/Documentation/devicetree/bindings/input/elan_i2c.txt new file mode 100644 index 000000000000..ee3242c4ba67 --- /dev/null +++ b/Documentation/devicetree/bindings/input/elan_i2c.txt @@ -0,0 +1,34 @@ +Elantech I2C Touchpad + +Required properties: +- compatible: must be "elan,ekth3000". +- reg: I2C address of the chip. +- interrupt-parent: a phandle for the interrupt controller (see interrupt + binding[0]). +- interrupts: interrupt to which the chip is connected (see interrupt + binding[0]). + +Optional properties: +- wakeup-source: touchpad can be used as a wakeup source. +- pinctrl-names: should be "default" (see pinctrl binding [1]). +- pinctrl-0: a phandle pointing to the pin settings for the device (see + pinctrl binding [1]). +- vcc-supply: a phandle for the regulator supplying 3.3V power. + +[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + +Example: + &i2c1 { + /* ... */ + + touchpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + interrupt-parent = <&gpio4>; + interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + + /* ... */ + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ac7269f90764..e6469ec7a90e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -42,6 +42,7 @@ dlink D-Link Corporation dmo Data Modul AG ebv EBV Elektronik edt Emerging Display Technologies +elan Elan Microelectronic Corp. emmicro EM Microelectronic epcos EPCOS AG epfl Ecole Polytechnique Fédérale de Lausanne diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 366fc7ad5eb6..d8b46b0f2dbe 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -215,6 +215,36 @@ config MOUSE_CYAPA To compile this driver as a module, choose M here: the module will be called cyapa. +config MOUSE_ELAN_I2C + tristate "ELAN I2C Touchpad support" + depends on I2C + help + This driver adds support for Elan I2C/SMbus Trackpads. + + Say Y here if you have a ELAN I2C/SMbus Touchpad. + + To compile this driver as a module, choose M here: the module will be + called elan_i2c. + +config MOUSE_ELAN_I2C_I2C + bool "Enable I2C support" + depends on MOUSE_ELAN_I2C + default y + help + Say Y here if Elan Touchpad in your system is connected to + a standard I2C controller. + + If unsure, say Y. + +config MOUSE_ELAN_I2C_SMBUS + bool "Enable SMbus support" + depends on MOUSE_ELAN_I2C + help + Say Y here if Elan Touchpad in your system is connected to + a SMbus adapter. + + If unsure, say Y. + config MOUSE_INPORT tristate "InPort/MS/ATIXL busmouse" depends on ISA diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index dda507f8b3a2..560003dcac37 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o obj-$(CONFIG_MOUSE_CYAPA) += cyapa.o +obj-$(CONFIG_MOUSE_ELAN_I2C) += elan_i2c.o obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o obj-$(CONFIG_MOUSE_INPORT) += inport.o obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o @@ -34,3 +35,7 @@ psmouse-$(CONFIG_MOUSE_PS2_SENTELIC) += sentelic.o psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o psmouse-$(CONFIG_MOUSE_PS2_CYPRESS) += cypress_ps2.o + +elan_i2c-objs := elan_i2c_core.o +elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_I2C) += elan_i2c_i2c.o +elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_SMBUS) += elan_i2c_smbus.o diff --git a/drivers/input/mouse/elan_i2c.h b/drivers/input/mouse/elan_i2c.h new file mode 100644 index 000000000000..2e838626205f --- /dev/null +++ b/drivers/input/mouse/elan_i2c.h @@ -0,0 +1,86 @@ +/* + * Elan I2C/SMBus Touchpad driver + * + * Copyright (c) 2013 ELAN Microelectronics Corp. + * + * Author: 林政維 (Duson Lin) + * Version: 1.5.5 + * + * Based on cyapa driver: + * copyright (c) 2011-2012 Cypress Semiconductor, Inc. + * copyright (c) 2011-2012 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Trademarks are the property of their respective owners. + */ + +#ifndef _ELAN_I2C_H +#define _ELAN_i2C_H + +#include + +#define ETP_ENABLE_ABS 0x0001 +#define ETP_ENABLE_CALIBRATE 0x0002 +#define ETP_DISABLE_CALIBRATE 0x0000 +#define ETP_DISABLE_POWER 0x0001 + +/* IAP Firmware handling */ +#define ETP_FW_NAME "elan_i2c.bin" +#define ETP_IAP_START_ADDR 0x0083 +#define ETP_FW_IAP_PAGE_ERR (1 << 5) +#define ETP_FW_IAP_INTF_ERR (1 << 4) +#define ETP_FW_PAGE_SIZE 64 +#define ETP_FW_PAGE_COUNT 768 +#define ETP_FW_SIZE (ETP_FW_PAGE_SIZE * ETP_FW_PAGE_COUNT) + +struct i2c_client; +struct completion; + +enum tp_mode { + IAP_MODE = 1, + MAIN_MODE +}; + +struct elan_transport_ops { + int (*initialize)(struct i2c_client *client); + int (*sleep_control)(struct i2c_client *, bool sleep); + int (*power_control)(struct i2c_client *, bool enable); + int (*set_mode)(struct i2c_client *client, u8 mode); + + int (*calibrate)(struct i2c_client *client); + int (*calibrate_result)(struct i2c_client *client, u8 *val); + + int (*get_baseline_data)(struct i2c_client *client, + bool max_baseliune, u8 *value); + + int (*get_version)(struct i2c_client *client, bool iap, u8 *version); + int (*get_sm_version)(struct i2c_client *client, u8 *version); + int (*get_checksum)(struct i2c_client *client, bool iap, u16 *csum); + int (*get_product_id)(struct i2c_client *client, u8 *id); + + int (*get_max)(struct i2c_client *client, + unsigned int *max_x, unsigned int *max_y); + int (*get_resolution)(struct i2c_client *client, + u8 *hw_res_x, u8 *hw_res_y); + int (*get_num_traces)(struct i2c_client *client, + unsigned int *x_tracenum, + unsigned int *y_tracenum); + + int (*iap_get_mode)(struct i2c_client *client, enum tp_mode *mode); + int (*iap_reset)(struct i2c_client *client); + + int (*prepare_fw_update)(struct i2c_client *client); + int (*write_fw_block)(struct i2c_client *client, + const u8 *page, u16 checksum, int idx); + int (*finish_fw_update)(struct i2c_client *client, + struct completion *reset_done); + + int (*get_report)(struct i2c_client *client, u8 *report); +}; + +extern const struct elan_transport_ops elan_smbus_ops, elan_i2c_ops; + +#endif /* _ELAN_I2C_H */ diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c new file mode 100644 index 000000000000..0cb2be48d537 --- /dev/null +++ b/drivers/input/mouse/elan_i2c_core.c @@ -0,0 +1,1137 @@ +/* + * Elan I2C/SMBus Touchpad driver + * + * Copyright (c) 2013 ELAN Microelectronics Corp. + * + * Author: 林政維 (Duson Lin) + * Version: 1.5.5 + * + * Based on cyapa driver: + * copyright (c) 2011-2012 Cypress Semiconductor, Inc. + * copyright (c) 2011-2012 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Trademarks are the property of their respective owners. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "elan_i2c.h" + +#define DRIVER_NAME "elan_i2c" +#define ELAN_DRIVER_VERSION "1.5.5" +#define ETP_PRESSURE_OFFSET 25 +#define ETP_MAX_PRESSURE 255 +#define ETP_FWIDTH_REDUCE 90 +#define ETP_FINGER_WIDTH 15 +#define ETP_RETRY_COUNT 3 + +#define ETP_MAX_FINGERS 5 +#define ETP_FINGER_DATA_LEN 5 +#define ETP_REPORT_ID 0x5D +#define ETP_REPORT_ID_OFFSET 2 +#define ETP_TOUCH_INFO_OFFSET 3 +#define ETP_FINGER_DATA_OFFSET 4 +#define ETP_MAX_REPORT_LEN 34 + +/* The main device structure */ +struct elan_tp_data { + struct i2c_client *client; + struct input_dev *input; + struct regulator *vcc; + + const struct elan_transport_ops *ops; + + /* for fw update */ + struct completion fw_completion; + bool in_fw_update; + + struct mutex sysfs_mutex; + + unsigned int max_x; + unsigned int max_y; + unsigned int width_x; + unsigned int width_y; + unsigned int x_res; + unsigned int y_res; + + u8 product_id; + u8 fw_version; + u8 sm_version; + u8 iap_version; + u16 fw_checksum; + + u8 mode; + + bool irq_wake; + + u8 min_baseline; + u8 max_baseline; + bool baseline_ready; +}; + +static int elan_enable_power(struct elan_tp_data *data) +{ + int repeat = ETP_RETRY_COUNT; + int error; + + error = regulator_enable(data->vcc); + if (error) { + dev_err(&data->client->dev, + "Failed to enable regulator: %d\n", error); + return error; + } + + do { + error = data->ops->power_control(data->client, true); + if (error >= 0) + return 0; + + msleep(30); + } while (--repeat > 0); + + return error; +} + +static int elan_disable_power(struct elan_tp_data *data) +{ + int repeat = ETP_RETRY_COUNT; + int error; + + do { + error = data->ops->power_control(data->client, false); + if (!error) { + error = regulator_disable(data->vcc); + if (error) { + dev_err(&data->client->dev, + "Failed to disable regulator: %d\n", + error); + /* Attempt to power the chip back up */ + data->ops->power_control(data->client, true); + break; + } + + return 0; + } + + msleep(30); + } while (--repeat > 0); + + return error; +} + +static int elan_sleep(struct elan_tp_data *data) +{ + int repeat = ETP_RETRY_COUNT; + int error; + + do { + error = data->ops->sleep_control(data->client, true); + if (!error) + return 0; + + msleep(30); + } while (--repeat > 0); + + return error; +} + +static int __elan_initialize(struct elan_tp_data *data) +{ + struct i2c_client *client = data->client; + int error; + + error = data->ops->initialize(client); + if (error) { + dev_err(&client->dev, "device initialize failed: %d\n", error); + return error; + } + + data->mode |= ETP_ENABLE_ABS; + error = data->ops->set_mode(client, data->mode); + if (error) { + dev_err(&client->dev, + "failed to switch to absolute mode: %d\n", error); + return error; + } + + error = data->ops->sleep_control(client, false); + if (error) { + dev_err(&client->dev, + "failed to wake device up: %d\n", error); + return error; + } + + return 0; +} + +static int elan_initialize(struct elan_tp_data *data) +{ + int repeat = ETP_RETRY_COUNT; + int error; + + do { + error = __elan_initialize(data); + if (!error) + return 0; + + repeat--; + msleep(30); + } while (--repeat > 0); + + return error; +} + +static int elan_query_device_info(struct elan_tp_data *data) +{ + int error; + + error = data->ops->get_product_id(data->client, &data->product_id); + if (error) + return error; + + error = data->ops->get_version(data->client, false, &data->fw_version); + if (error) + return error; + + error = data->ops->get_checksum(data->client, false, + &data->fw_checksum); + if (error) + return error; + + error = data->ops->get_sm_version(data->client, &data->sm_version); + if (error) + return error; + + error = data->ops->get_version(data->client, true, &data->iap_version); + if (error) + return error; + + return 0; +} + +static unsigned int elan_convert_resolution(u8 val) +{ + /* + * (value from firmware) * 10 + 790 = dpi + * + * We also have to convert dpi to dots/mm (*10/254 to avoid floating + * point). + */ + + return ((int)(char)val * 10 + 790) * 10 / 254; +} + +static int elan_query_device_parameters(struct elan_tp_data *data) +{ + unsigned int x_traces, y_traces; + u8 hw_x_res, hw_y_res; + int error; + + error = data->ops->get_max(data->client, &data->max_x, &data->max_y); + if (error) + return error; + + error = data->ops->get_num_traces(data->client, &x_traces, &y_traces); + if (error) + return error; + + data->width_x = data->max_x / x_traces; + data->width_y = data->max_y / y_traces; + + error = data->ops->get_resolution(data->client, &hw_x_res, &hw_y_res); + if (error) + return error; + + data->x_res = elan_convert_resolution(hw_x_res); + data->y_res = elan_convert_resolution(hw_y_res); + + return 0; +} + +/* + ********************************************************** + * IAP firmware updater related routines + ********************************************************** + */ +static int elan_write_fw_block(struct elan_tp_data *data, + const u8 *page, u16 checksum, int idx) +{ + int retry = ETP_RETRY_COUNT; + int error; + + do { + error = data->ops->write_fw_block(data->client, + page, checksum, idx); + if (!error) + return 0; + + dev_dbg(&data->client->dev, + "IAP retrying page %d (error: %d)\n", idx, error); + } while (--retry > 0); + + return error; +} + +static int __elan_update_firmware(struct elan_tp_data *data, + const struct firmware *fw) +{ + struct i2c_client *client = data->client; + struct device *dev = &client->dev; + int i, j; + int error; + u16 iap_start_addr; + u16 boot_page_count; + u16 sw_checksum = 0, fw_checksum = 0; + + error = data->ops->prepare_fw_update(client); + if (error) + return error; + + iap_start_addr = get_unaligned_le16(&fw->data[ETP_IAP_START_ADDR * 2]); + + boot_page_count = (iap_start_addr * 2) / ETP_FW_PAGE_SIZE; + for (i = boot_page_count; i < ETP_FW_PAGE_COUNT; i++) { + u16 checksum = 0; + const u8 *page = &fw->data[i * ETP_FW_PAGE_SIZE]; + + for (j = 0; j < ETP_FW_PAGE_SIZE; j += 2) + checksum += ((page[j + 1] << 8) | page[j]); + + error = elan_write_fw_block(data, page, checksum, i); + if (error) { + dev_err(dev, "write page %d fail: %d\n", i, error); + return error; + } + + sw_checksum += checksum; + } + + /* Wait WDT reset and power on reset */ + msleep(600); + + error = data->ops->finish_fw_update(client, &data->fw_completion); + if (error) + return error; + + error = data->ops->get_checksum(client, true, &fw_checksum); + if (error) + return error; + + if (sw_checksum != fw_checksum) { + dev_err(dev, "checksum diff sw=[%04X], fw=[%04X]\n", + sw_checksum, fw_checksum); + return -EIO; + } + + return 0; +} + +static int elan_update_firmware(struct elan_tp_data *data, + const struct firmware *fw) +{ + struct i2c_client *client = data->client; + int retval; + + dev_dbg(&client->dev, "Starting firmware update....\n"); + + disable_irq(client->irq); + data->in_fw_update = true; + + retval = __elan_update_firmware(data, fw); + if (retval) { + dev_err(&client->dev, "firmware update failed: %d\n", retval); + data->ops->iap_reset(client); + } else { + /* Reinitialize TP after fw is updated */ + elan_initialize(data); + elan_query_device_info(data); + } + + data->in_fw_update = false; + enable_irq(client->irq); + + return retval; +} + +/* + ******************************************************************* + * SYSFS attributes + ******************************************************************* + */ +static ssize_t elan_sysfs_read_fw_checksum(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + + return sprintf(buf, "0x%04x\n", data->fw_checksum); +} + +static ssize_t elan_sysfs_read_product_id(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + + return sprintf(buf, "%d.0\n", data->product_id); +} + +static ssize_t elan_sysfs_read_fw_ver(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + + return sprintf(buf, "%d.0\n", data->fw_version); +} + +static ssize_t elan_sysfs_read_sm_ver(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + + return sprintf(buf, "%d.0\n", data->sm_version); +} + +static ssize_t elan_sysfs_read_iap_ver(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + + return sprintf(buf, "%d.0\n", data->iap_version); +} + +static ssize_t elan_sysfs_update_fw(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + const struct firmware *fw; + int error; + + error = request_firmware(&fw, ETP_FW_NAME, dev); + if (error) { + dev_err(dev, "cannot load firmware %s: %d\n", + ETP_FW_NAME, error); + return error; + } + + /* Firmware must be exactly PAGE_NUM * PAGE_SIZE bytes */ + if (fw->size != ETP_FW_SIZE) { + dev_err(dev, "invalid firmware size = %zu, expected %d.\n", + fw->size, ETP_FW_SIZE); + error = -EBADF; + goto out_release_fw; + } + + error = mutex_lock_interruptible(&data->sysfs_mutex); + if (error) + goto out_release_fw; + + error = elan_update_firmware(data, fw); + + mutex_unlock(&data->sysfs_mutex); + +out_release_fw: + release_firmware(fw); + return error ?: count; +} + +static ssize_t calibrate_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + int tries = 20; + int retval; + int error; + u8 val[3]; + + retval = mutex_lock_interruptible(&data->sysfs_mutex); + if (retval) + return retval; + + disable_irq(client->irq); + + data->mode |= ETP_ENABLE_CALIBRATE; + retval = data->ops->set_mode(client, data->mode); + if (retval) { + dev_err(dev, "failed to enable calibration mode: %d\n", + retval); + goto out; + } + + retval = data->ops->calibrate(client); + if (retval) { + dev_err(dev, "failed to start calibration: %d\n", + retval); + goto out_disable_calibrate; + } + + val[0] = 0xff; + do { + /* Wait 250ms before checking if calibration has completed. */ + msleep(250); + + retval = data->ops->calibrate_result(client, val); + if (retval) + dev_err(dev, "failed to check calibration result: %d\n", + retval); + else if (val[0] == 0) + break; /* calibration done */ + + } while (--tries); + + if (tries == 0) { + dev_err(dev, "failed to calibrate. Timeout.\n"); + retval = -ETIMEDOUT; + } + +out_disable_calibrate: + data->mode &= ~ETP_ENABLE_CALIBRATE; + error = data->ops->set_mode(data->client, data->mode); + if (error) { + dev_err(dev, "failed to disable calibration mode: %d\n", + error); + if (!retval) + retval = error; + } +out: + enable_irq(client->irq); + mutex_unlock(&data->sysfs_mutex); + return retval ?: count; +} + +static ssize_t elan_sysfs_read_mode(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + int error; + enum tp_mode mode; + + error = mutex_lock_interruptible(&data->sysfs_mutex); + if (error) + return error; + + error = data->ops->iap_get_mode(data->client, &mode); + + mutex_unlock(&data->sysfs_mutex); + + if (error) + return error; + + return sprintf(buf, "%d\n", (int)mode); +} + +static DEVICE_ATTR(product_id, S_IRUGO, elan_sysfs_read_product_id, NULL); +static DEVICE_ATTR(firmware_version, S_IRUGO, elan_sysfs_read_fw_ver, NULL); +static DEVICE_ATTR(sample_version, S_IRUGO, elan_sysfs_read_sm_ver, NULL); +static DEVICE_ATTR(iap_version, S_IRUGO, elan_sysfs_read_iap_ver, NULL); +static DEVICE_ATTR(fw_checksum, S_IRUGO, elan_sysfs_read_fw_checksum, NULL); +static DEVICE_ATTR(mode, S_IRUGO, elan_sysfs_read_mode, NULL); +static DEVICE_ATTR(update_fw, S_IWUSR, NULL, elan_sysfs_update_fw); + +static DEVICE_ATTR_WO(calibrate); + +static struct attribute *elan_sysfs_entries[] = { + &dev_attr_product_id.attr, + &dev_attr_firmware_version.attr, + &dev_attr_sample_version.attr, + &dev_attr_iap_version.attr, + &dev_attr_fw_checksum.attr, + &dev_attr_calibrate.attr, + &dev_attr_mode.attr, + &dev_attr_update_fw.attr, + NULL, +}; + +static const struct attribute_group elan_sysfs_group = { + .attrs = elan_sysfs_entries, +}; + +static ssize_t acquire_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + int error; + int retval; + + retval = mutex_lock_interruptible(&data->sysfs_mutex); + if (retval) + return retval; + + disable_irq(client->irq); + + data->baseline_ready = false; + + data->mode |= ETP_ENABLE_CALIBRATE; + retval = data->ops->set_mode(data->client, data->mode); + if (retval) { + dev_err(dev, "Failed to enable calibration mode to get baseline: %d\n", + retval); + goto out; + } + + msleep(250); + + retval = data->ops->get_baseline_data(data->client, true, + &data->max_baseline); + if (retval) { + dev_err(dev, "Failed to read max baseline form device: %d\n", + retval); + goto out_disable_calibrate; + } + + retval = data->ops->get_baseline_data(data->client, false, + &data->min_baseline); + if (retval) { + dev_err(dev, "Failed to read min baseline form device: %d\n", + retval); + goto out_disable_calibrate; + } + + data->baseline_ready = true; + +out_disable_calibrate: + data->mode &= ~ETP_ENABLE_CALIBRATE; + error = data->ops->set_mode(data->client, data->mode); + if (error) { + dev_err(dev, "Failed to disable calibration mode after acquiring baseline: %d\n", + error); + if (!retval) + retval = error; + } +out: + enable_irq(client->irq); + mutex_unlock(&data->sysfs_mutex); + return retval ?: count; +} + +static ssize_t min_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + int retval; + + retval = mutex_lock_interruptible(&data->sysfs_mutex); + if (retval) + return retval; + + if (!data->baseline_ready) { + retval = -ENODATA; + goto out; + } + + retval = snprintf(buf, PAGE_SIZE, "%d", data->min_baseline); + +out: + mutex_unlock(&data->sysfs_mutex); + return retval; +} + +static ssize_t max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + int retval; + + retval = mutex_lock_interruptible(&data->sysfs_mutex); + if (retval) + return retval; + + if (!data->baseline_ready) { + retval = -ENODATA; + goto out; + } + + retval = snprintf(buf, PAGE_SIZE, "%d", data->max_baseline); + +out: + mutex_unlock(&data->sysfs_mutex); + return retval; +} + + +static DEVICE_ATTR_WO(acquire); +static DEVICE_ATTR_RO(min); +static DEVICE_ATTR_RO(max); + +static struct attribute *elan_baseline_sysfs_entries[] = { + &dev_attr_acquire.attr, + &dev_attr_min.attr, + &dev_attr_max.attr, + NULL, +}; + +static const struct attribute_group elan_baseline_sysfs_group = { + .name = "baseline", + .attrs = elan_baseline_sysfs_entries, +}; + +static const struct attribute_group *elan_sysfs_groups[] = { + &elan_sysfs_group, + &elan_baseline_sysfs_group, + NULL +}; + +/* + ****************************************************************** + * Elan isr functions + ****************************************************************** + */ +static void elan_report_contact(struct elan_tp_data *data, + int contact_num, bool contact_valid, + u8 *finger_data) +{ + struct input_dev *input = data->input; + unsigned int pos_x, pos_y; + unsigned int pressure, mk_x, mk_y; + unsigned int area_x, area_y, major, minor, new_pressure; + + + if (contact_valid) { + pos_x = ((finger_data[0] & 0xf0) << 4) | + finger_data[1]; + pos_y = ((finger_data[0] & 0x0f) << 8) | + finger_data[2]; + mk_x = (finger_data[3] & 0x0f); + mk_y = (finger_data[3] >> 4); + pressure = finger_data[4]; + + if (pos_x > data->max_x || pos_y > data->max_y) { + dev_dbg(input->dev.parent, + "[%d] x=%d y=%d over max (%d, %d)", + contact_num, pos_x, pos_y, + data->max_x, data->max_y); + return; + } + + /* + * To avoid treating large finger as palm, let's reduce the + * width x and y per trace. + */ + area_x = mk_x * (data->width_x - ETP_FWIDTH_REDUCE); + area_y = mk_y * (data->width_y - ETP_FWIDTH_REDUCE); + + major = max(area_x, area_y); + minor = min(area_x, area_y); + + new_pressure = pressure + ETP_PRESSURE_OFFSET; + if (new_pressure > ETP_MAX_PRESSURE) + new_pressure = ETP_MAX_PRESSURE; + + input_mt_slot(input, contact_num); + input_mt_report_slot_state(input, MT_TOOL_FINGER, true); + input_report_abs(input, ABS_MT_POSITION_X, pos_x); + input_report_abs(input, ABS_MT_POSITION_Y, data->max_y - pos_y); + input_report_abs(input, ABS_MT_PRESSURE, new_pressure); + input_report_abs(input, ABS_TOOL_WIDTH, mk_x); + input_report_abs(input, ABS_MT_TOUCH_MAJOR, major); + input_report_abs(input, ABS_MT_TOUCH_MINOR, minor); + } else { + input_mt_slot(input, contact_num); + input_mt_report_slot_state(input, MT_TOOL_FINGER, false); + } +} + +static void elan_report_absolute(struct elan_tp_data *data, u8 *packet) +{ + struct input_dev *input = data->input; + u8 *finger_data = &packet[ETP_FINGER_DATA_OFFSET]; + int i; + u8 tp_info = packet[ETP_TOUCH_INFO_OFFSET]; + bool contact_valid; + + for (i = 0; i < ETP_MAX_FINGERS; i++) { + contact_valid = tp_info & (1U << (3 + i)); + elan_report_contact(data, i, contact_valid, finger_data); + + if (contact_valid) + finger_data += ETP_FINGER_DATA_LEN; + } + + input_report_key(input, BTN_LEFT, tp_info & 0x01); + input_mt_report_pointer_emulation(input, true); + input_sync(input); +} + +static irqreturn_t elan_isr(int irq, void *dev_id) +{ + struct elan_tp_data *data = dev_id; + struct device *dev = &data->client->dev; + int error; + u8 report[ETP_MAX_REPORT_LEN]; + + /* + * When device is connected to i2c bus, when all IAP page writes + * complete, the driver will receive interrupt and must read + * 0000 to confirm that IAP is finished. + */ + if (data->in_fw_update) { + complete(&data->fw_completion); + goto out; + } + + error = data->ops->get_report(data->client, report); + if (error) + goto out; + + if (report[ETP_REPORT_ID_OFFSET] != ETP_REPORT_ID) + dev_err(dev, "invalid report id data (%x)\n", + report[ETP_REPORT_ID_OFFSET]); + else + elan_report_absolute(data, report); + +out: + return IRQ_HANDLED; +} + +/* + ****************************************************************** + * Elan initialization functions + ****************************************************************** + */ +static int elan_setup_input_device(struct elan_tp_data *data) +{ + struct device *dev = &data->client->dev; + struct input_dev *input; + unsigned int max_width = max(data->width_x, data->width_y); + unsigned int min_width = min(data->width_x, data->width_y); + int error; + + input = devm_input_allocate_device(dev); + if (!input) + return -ENOMEM; + + input->name = "Elan Touchpad"; + input->id.bustype = BUS_I2C; + input_set_drvdata(input, data); + + error = input_mt_init_slots(input, ETP_MAX_FINGERS, + INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED); + if (error) { + dev_err(dev, "failed to initialize MT slots: %d\n", error); + return error; + } + + __set_bit(EV_ABS, input->evbit); + __set_bit(INPUT_PROP_POINTER, input->propbit); + __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); + __set_bit(BTN_LEFT, input->keybit); + + /* Set up ST parameters */ + input_set_abs_params(input, ABS_X, 0, data->max_x, 0, 0); + input_set_abs_params(input, ABS_Y, 0, data->max_y, 0, 0); + input_abs_set_res(input, ABS_X, data->x_res); + input_abs_set_res(input, ABS_Y, data->y_res); + input_set_abs_params(input, ABS_PRESSURE, 0, ETP_MAX_PRESSURE, 0, 0); + input_set_abs_params(input, ABS_TOOL_WIDTH, 0, ETP_FINGER_WIDTH, 0, 0); + + /* And MT parameters */ + input_set_abs_params(input, ABS_MT_POSITION_X, 0, data->max_x, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, data->max_y, 0, 0); + input_abs_set_res(input, ABS_MT_POSITION_X, data->x_res); + input_abs_set_res(input, ABS_MT_POSITION_Y, data->y_res); + input_set_abs_params(input, ABS_MT_PRESSURE, 0, + ETP_MAX_PRESSURE, 0, 0); + input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, + ETP_FINGER_WIDTH * max_width, 0, 0); + input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, + ETP_FINGER_WIDTH * min_width, 0, 0); + + data->input = input; + + return 0; +} + +static void elan_disable_regulator(void *_data) +{ + struct elan_tp_data *data = _data; + + regulator_disable(data->vcc); +} + +static void elan_remove_sysfs_groups(void *_data) +{ + struct elan_tp_data *data = _data; + + sysfs_remove_groups(&data->client->dev.kobj, elan_sysfs_groups); +} + +static int elan_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + const struct elan_transport_ops *transport_ops; + struct device *dev = &client->dev; + struct elan_tp_data *data; + unsigned long irqflags; + int error; + + if (IS_ENABLED(CONFIG_MOUSE_ELAN_I2C_I2C) && + i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + transport_ops = &elan_i2c_ops; + } else if (IS_ENABLED(CONFIG_MOUSE_ELAN_I2C_SMBUS) && + i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA | + I2C_FUNC_SMBUS_I2C_BLOCK)) { + transport_ops = &elan_smbus_ops; + } else { + dev_err(dev, "not a supported I2C/SMBus adapter\n"); + return -EIO; + } + + data = devm_kzalloc(&client->dev, sizeof(struct elan_tp_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + + data->ops = transport_ops; + data->client = client; + init_completion(&data->fw_completion); + mutex_init(&data->sysfs_mutex); + + data->vcc = devm_regulator_get(&client->dev, "vcc"); + if (IS_ERR(data->vcc)) { + error = PTR_ERR(data->vcc); + if (error != -EPROBE_DEFER) + dev_err(&client->dev, + "Failed to get 'vcc' regulator: %d\n", + error); + return error; + } + + error = regulator_enable(data->vcc); + if (error) { + dev_err(&client->dev, + "Failed to enable regulator: %d\n", error); + return error; + } + + error = devm_add_action(&client->dev, + elan_disable_regulator, data); + if (error) { + regulator_disable(data->vcc); + dev_err(&client->dev, + "Failed to add disable regulator action: %d\n", + error); + return error; + } + + /* Initialize the touchpad. */ + error = elan_initialize(data); + if (error) + return error; + + error = elan_query_device_info(data); + if (error) + return error; + + error = elan_query_device_parameters(data); + if (error) + return error; + + dev_dbg(&client->dev, + "Elan Touchpad Information:\n" + " Module product ID: 0x%04x\n" + " Firmware Version: 0x%04x\n" + " Sample Version: 0x%04x\n" + " IAP Version: 0x%04x\n" + " Max ABS X,Y: %d,%d\n" + " Width X,Y: %d,%d\n" + " Resolution X,Y: %d,%d (dots/mm)\n", + data->product_id, + data->fw_version, + data->sm_version, + data->iap_version, + data->max_x, data->max_y, + data->width_x, data->width_y, + data->x_res, data->y_res); + + /* Set up input device properties based on queried parameters. */ + error = elan_setup_input_device(data); + if (error) + return error; + + /* + * Systems using device tree should set up interrupt via DTS, + * the rest will use the default falling edge interrupts. + */ + irqflags = client->dev.of_node ? 0 : IRQF_TRIGGER_FALLING; + + error = devm_request_threaded_irq(&client->dev, client->irq, + NULL, elan_isr, + irqflags | IRQF_ONESHOT, + client->name, data); + if (error) { + dev_err(&client->dev, "cannot register irq=%d\n", client->irq); + return error; + } + + error = sysfs_create_groups(&client->dev.kobj, elan_sysfs_groups); + if (error) { + dev_err(&client->dev, "failed to create sysfs attributes: %d\n", + error); + return error; + } + + error = devm_add_action(&client->dev, + elan_remove_sysfs_groups, data); + if (error) { + elan_remove_sysfs_groups(data); + dev_err(&client->dev, + "Failed to add sysfs cleanup action: %d\n", + error); + return error; + } + + error = input_register_device(data->input); + if (error) { + dev_err(&client->dev, "failed to register input device: %d\n", + error); + return error; + } + + /* + * Systems using device tree should set up wakeup via DTS, + * the rest will configure device as wakeup source by default. + */ + if (!client->dev.of_node) + device_init_wakeup(&client->dev, true); + + return 0; +} + +static int __maybe_unused elan_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + int ret; + + /* + * We are taking the mutex to make sure sysfs operations are + * complete before we attempt to bring the device into low[er] + * power mode. + */ + ret = mutex_lock_interruptible(&data->sysfs_mutex); + if (ret) + return ret; + + disable_irq(client->irq); + + if (device_may_wakeup(dev)) { + ret = elan_sleep(data); + /* Enable wake from IRQ */ + data->irq_wake = (enable_irq_wake(client->irq) == 0); + } else { + ret = elan_disable_power(data); + } + + mutex_unlock(&data->sysfs_mutex); + return ret; +} + +static int __maybe_unused elan_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + int error; + + if (device_may_wakeup(dev) && data->irq_wake) { + disable_irq_wake(client->irq); + data->irq_wake = false; + } + + error = elan_enable_power(data); + if (error) + dev_err(dev, "power up when resuming failed: %d\n", error); + + error = elan_initialize(data); + if (error) + dev_err(dev, "initialize when resuming failed: %d\n", error); + + enable_irq(data->client->irq); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(elan_pm_ops, elan_suspend, elan_resume); + +static const struct i2c_device_id elan_id[] = { + { DRIVER_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, elan_id); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id elan_acpi_id[] = { + { "ELAN0000", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, elan_acpi_id); +#endif + +#ifdef CONFIG_OF +static const struct of_device_id elan_of_match[] = { + { .compatible = "elan,ekth3000" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, elan_of_match); +#endif + +static struct i2c_driver elan_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .pm = &elan_pm_ops, + .acpi_match_table = ACPI_PTR(elan_acpi_id), + .of_match_table = of_match_ptr(elan_of_match), + }, + .probe = elan_probe, + .id_table = elan_id, +}; + +module_i2c_driver(elan_driver); + +MODULE_AUTHOR("Duson Lin "); +MODULE_DESCRIPTION("Elan I2C/SMBus Touchpad driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(ELAN_DRIVER_VERSION); diff --git a/drivers/input/mouse/elan_i2c_i2c.c b/drivers/input/mouse/elan_i2c_i2c.c new file mode 100644 index 000000000000..97d4937fc244 --- /dev/null +++ b/drivers/input/mouse/elan_i2c_i2c.c @@ -0,0 +1,611 @@ +/* + * Elan I2C/SMBus Touchpad driver - I2C interface + * + * Copyright (c) 2013 ELAN Microelectronics Corp. + * + * Author: 林政維 (Duson Lin) + * Version: 1.5.5 + * + * Based on cyapa driver: + * copyright (c) 2011-2012 Cypress Semiconductor, Inc. + * copyright (c) 2011-2012 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Trademarks are the property of their respective owners. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "elan_i2c.h" + +/* Elan i2c commands */ +#define ETP_I2C_RESET 0x0100 +#define ETP_I2C_WAKE_UP 0x0800 +#define ETP_I2C_SLEEP 0x0801 +#define ETP_I2C_DESC_CMD 0x0001 +#define ETP_I2C_REPORT_DESC_CMD 0x0002 +#define ETP_I2C_STAND_CMD 0x0005 +#define ETP_I2C_UNIQUEID_CMD 0x0101 +#define ETP_I2C_FW_VERSION_CMD 0x0102 +#define ETP_I2C_SM_VERSION_CMD 0x0103 +#define ETP_I2C_XY_TRACENUM_CMD 0x0105 +#define ETP_I2C_MAX_X_AXIS_CMD 0x0106 +#define ETP_I2C_MAX_Y_AXIS_CMD 0x0107 +#define ETP_I2C_RESOLUTION_CMD 0x0108 +#define ETP_I2C_IAP_VERSION_CMD 0x0110 +#define ETP_I2C_SET_CMD 0x0300 +#define ETP_I2C_POWER_CMD 0x0307 +#define ETP_I2C_FW_CHECKSUM_CMD 0x030F +#define ETP_I2C_IAP_CTRL_CMD 0x0310 +#define ETP_I2C_IAP_CMD 0x0311 +#define ETP_I2C_IAP_RESET_CMD 0x0314 +#define ETP_I2C_IAP_CHECKSUM_CMD 0x0315 +#define ETP_I2C_CALIBRATE_CMD 0x0316 +#define ETP_I2C_MAX_BASELINE_CMD 0x0317 +#define ETP_I2C_MIN_BASELINE_CMD 0x0318 + +#define ETP_I2C_REPORT_LEN 34 +#define ETP_I2C_DESC_LENGTH 30 +#define ETP_I2C_REPORT_DESC_LENGTH 158 +#define ETP_I2C_INF_LENGTH 2 +#define ETP_I2C_IAP_PASSWORD 0x1EA5 +#define ETP_I2C_IAP_RESET 0xF0F0 +#define ETP_I2C_MAIN_MODE_ON (1 << 9) +#define ETP_I2C_IAP_REG_L 0x01 +#define ETP_I2C_IAP_REG_H 0x06 + +static int elan_i2c_read_block(struct i2c_client *client, + u16 reg, u8 *val, u16 len) +{ + __le16 buf[] = { + cpu_to_le16(reg), + }; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = client->flags & I2C_M_TEN, + .len = sizeof(buf), + .buf = (u8 *)buf, + }, + { + .addr = client->addr, + .flags = (client->flags & I2C_M_TEN) | I2C_M_RD, + .len = len, + .buf = val, + } + }; + int ret; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + return ret == ARRAY_SIZE(msgs) ? 0 : (ret < 0 ? ret : -EIO); +} + +static int elan_i2c_read_cmd(struct i2c_client *client, u16 reg, u8 *val) +{ + int retval; + + retval = elan_i2c_read_block(client, reg, val, ETP_I2C_INF_LENGTH); + if (retval < 0) { + dev_err(&client->dev, "reading cmd (0x%04x) fail.\n", reg); + return retval; + } + + return 0; +} + +static int elan_i2c_write_cmd(struct i2c_client *client, u16 reg, u16 cmd) +{ + __le16 buf[] = { + cpu_to_le16(reg), + cpu_to_le16(cmd), + }; + struct i2c_msg msg = { + .addr = client->addr, + .flags = client->flags & I2C_M_TEN, + .len = sizeof(buf), + .buf = (u8 *)buf, + }; + int ret; + + ret = i2c_transfer(client->adapter, &msg, 1); + return ret == 1 ? 0 : (ret < 0 ? ret : -EIO); +} + +static int elan_i2c_initialize(struct i2c_client *client) +{ + struct device *dev = &client->dev; + int error; + u8 val[256]; + + error = elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD, ETP_I2C_RESET); + if (error) { + dev_err(dev, "device reset failed: %d\n", error); + return error; + } + + /* Wait for the device to reset */ + msleep(100); + + /* get reset acknowledgement 0000 */ + error = i2c_master_recv(client, val, ETP_I2C_INF_LENGTH); + if (error < 0) { + dev_err(dev, "failed to read reset response: %d\n", error); + return error; + } + + error = elan_i2c_read_block(client, ETP_I2C_DESC_CMD, + val, ETP_I2C_DESC_LENGTH); + if (error) { + dev_err(dev, "cannot get device descriptor: %d\n", error); + return error; + } + + error = elan_i2c_read_block(client, ETP_I2C_REPORT_DESC_CMD, + val, ETP_I2C_REPORT_DESC_LENGTH); + if (error) { + dev_err(dev, "fetching report descriptor failed.: %d\n", error); + return error; + } + + return 0; +} + +static int elan_i2c_sleep_control(struct i2c_client *client, bool sleep) +{ + return elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD, + sleep ? ETP_I2C_SLEEP : ETP_I2C_WAKE_UP); +} + +static int elan_i2c_power_control(struct i2c_client *client, bool enable) +{ + u8 val[2]; + u16 reg; + int error; + + error = elan_i2c_read_cmd(client, ETP_I2C_POWER_CMD, val); + if (error) { + dev_err(&client->dev, + "failed to read current power state: %d\n", + error); + return error; + } + + reg = le16_to_cpup((__le16 *)val); + if (enable) + reg &= ~ETP_DISABLE_POWER; + else + reg |= ETP_DISABLE_POWER; + + error = elan_i2c_write_cmd(client, ETP_I2C_POWER_CMD, reg); + if (error) { + dev_err(&client->dev, + "failed to write current power state: %d\n", + error); + return error; + } + + return 0; +} + +static int elan_i2c_set_mode(struct i2c_client *client, u8 mode) +{ + return elan_i2c_write_cmd(client, ETP_I2C_SET_CMD, mode); +} + + +static int elan_i2c_calibrate(struct i2c_client *client) +{ + return elan_i2c_write_cmd(client, ETP_I2C_CALIBRATE_CMD, 1); +} + +static int elan_i2c_calibrate_result(struct i2c_client *client, u8 *val) +{ + return elan_i2c_read_block(client, ETP_I2C_CALIBRATE_CMD, val, 1); +} + +static int elan_i2c_get_baseline_data(struct i2c_client *client, + bool max_baseline, u8 *value) +{ + int error; + u8 val[3]; + + error = elan_i2c_read_cmd(client, + max_baseline ? ETP_I2C_MAX_BASELINE_CMD : + ETP_I2C_MIN_BASELINE_CMD, + val); + if (error) + return error; + + *value = le16_to_cpup((__le16 *)val); + + return 0; +} + +static int elan_i2c_get_version(struct i2c_client *client, + bool iap, u8 *version) +{ + int error; + u8 val[3]; + + error = elan_i2c_read_cmd(client, + iap ? ETP_I2C_IAP_VERSION_CMD : + ETP_I2C_FW_VERSION_CMD, + val); + if (error) { + dev_err(&client->dev, "failed to get %s version: %d\n", + iap ? "IAP" : "FW", error); + return error; + } + + *version = val[0]; + return 0; +} + +static int elan_i2c_get_sm_version(struct i2c_client *client, u8 *version) +{ + int error; + u8 val[3]; + + error = elan_i2c_read_cmd(client, ETP_I2C_SM_VERSION_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get SM version: %d\n", error); + return error; + } + + *version = val[0]; + return 0; +} + +static int elan_i2c_get_product_id(struct i2c_client *client, u8 *id) +{ + int error; + u8 val[3]; + + error = elan_i2c_read_cmd(client, ETP_I2C_UNIQUEID_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get product ID: %d\n", error); + return error; + } + + *id = val[0]; + return 0; +} + +static int elan_i2c_get_checksum(struct i2c_client *client, + bool iap, u16 *csum) +{ + int error; + u8 val[3]; + + error = elan_i2c_read_cmd(client, + iap ? ETP_I2C_IAP_CHECKSUM_CMD : + ETP_I2C_FW_CHECKSUM_CMD, + val); + if (error) { + dev_err(&client->dev, "failed to get %s checksum: %d\n", + iap ? "IAP" : "FW", error); + return error; + } + + *csum = le16_to_cpup((__le16 *)val); + return 0; +} + +static int elan_i2c_get_max(struct i2c_client *client, + unsigned int *max_x, unsigned int *max_y) +{ + int error; + u8 val[3]; + + error = elan_i2c_read_cmd(client, ETP_I2C_MAX_X_AXIS_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get X dimension: %d\n", error); + return error; + } + + *max_x = le16_to_cpup((__le16 *)val) & 0x0fff; + + error = elan_i2c_read_cmd(client, ETP_I2C_MAX_Y_AXIS_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get Y dimension: %d\n", error); + return error; + } + + *max_y = le16_to_cpup((__le16 *)val) & 0x0fff; + + return 0; +} + +static int elan_i2c_get_resolution(struct i2c_client *client, + u8 *hw_res_x, u8 *hw_res_y) +{ + int error; + u8 val[3]; + + error = elan_i2c_read_cmd(client, ETP_I2C_RESOLUTION_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get resolution: %d\n", error); + return error; + } + + *hw_res_x = val[0]; + *hw_res_y = val[1]; + + return 0; +} + +static int elan_i2c_get_num_traces(struct i2c_client *client, + unsigned int *x_traces, + unsigned int *y_traces) +{ + int error; + u8 val[3]; + + error = elan_i2c_read_cmd(client, ETP_I2C_XY_TRACENUM_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get trace info: %d\n", error); + return error; + } + + *x_traces = val[0] - 1; + *y_traces = val[1] - 1; + + return 0; +} + +static int elan_i2c_iap_get_mode(struct i2c_client *client, enum tp_mode *mode) +{ + int error; + u16 constant; + u8 val[3]; + + error = elan_i2c_read_cmd(client, ETP_I2C_IAP_CTRL_CMD, val); + if (error) { + dev_err(&client->dev, + "failed to read iap control register: %d\n", + error); + return error; + } + + constant = le16_to_cpup((__le16 *)val); + dev_dbg(&client->dev, "iap control reg: 0x%04x.\n", constant); + + *mode = (constant & ETP_I2C_MAIN_MODE_ON) ? MAIN_MODE : IAP_MODE; + + return 0; +} + +static int elan_i2c_iap_reset(struct i2c_client *client) +{ + int error; + + error = elan_i2c_write_cmd(client, ETP_I2C_IAP_RESET_CMD, + ETP_I2C_IAP_RESET); + if (error) { + dev_err(&client->dev, "cannot reset IC: %d\n", error); + return error; + } + + return 0; +} + +static int elan_i2c_set_flash_key(struct i2c_client *client) +{ + int error; + + error = elan_i2c_write_cmd(client, ETP_I2C_IAP_CMD, + ETP_I2C_IAP_PASSWORD); + if (error) { + dev_err(&client->dev, "cannot set flash key: %d\n", error); + return error; + } + + return 0; +} + +static int elan_i2c_prepare_fw_update(struct i2c_client *client) +{ + struct device *dev = &client->dev; + int error; + enum tp_mode mode; + u8 val[3]; + u16 password; + + /* Get FW in which mode (IAP_MODE/MAIN_MODE) */ + error = elan_i2c_iap_get_mode(client, &mode); + if (error) + return error; + + if (mode == IAP_MODE) { + /* Reset IC */ + error = elan_i2c_iap_reset(client); + if (error) + return error; + + msleep(30); + } + + /* Set flash key*/ + error = elan_i2c_set_flash_key(client); + if (error) + return error; + + /* Wait for F/W IAP initialization */ + msleep(mode == MAIN_MODE ? 100 : 30); + + /* Check if we are in IAP mode or not */ + error = elan_i2c_iap_get_mode(client, &mode); + if (error) + return error; + + if (mode == MAIN_MODE) { + dev_err(dev, "wrong mode: %d\n", mode); + return -EIO; + } + + /* Set flash key again */ + error = elan_i2c_set_flash_key(client); + if (error) + return error; + + /* Wait for F/W IAP initialization */ + msleep(30); + + /* read back to check we actually enabled successfully. */ + error = elan_i2c_read_cmd(client, ETP_I2C_IAP_CMD, val); + if (error) { + dev_err(dev, "cannot read iap password: %d\n", + error); + return error; + } + + password = le16_to_cpup((__le16 *)val); + if (password != ETP_I2C_IAP_PASSWORD) { + dev_err(dev, "wrong iap password: 0x%X\n", password); + return -EIO; + } + + return 0; +} + +static int elan_i2c_write_fw_block(struct i2c_client *client, + const u8 *page, u16 checksum, int idx) +{ + struct device *dev = &client->dev; + u8 page_store[ETP_FW_PAGE_SIZE + 4]; + u8 val[3]; + u16 result; + int ret, error; + + page_store[0] = ETP_I2C_IAP_REG_L; + page_store[1] = ETP_I2C_IAP_REG_H; + memcpy(&page_store[2], page, ETP_FW_PAGE_SIZE); + /* recode checksum at last two bytes */ + put_unaligned_le16(checksum, &page_store[ETP_FW_PAGE_SIZE + 2]); + + ret = i2c_master_send(client, page_store, sizeof(page_store)); + if (ret != sizeof(page_store)) { + error = ret < 0 ? ret : -EIO; + dev_err(dev, "Failed to write page %d: %d\n", idx, error); + return error; + } + + /* Wait for F/W to update one page ROM data. */ + msleep(20); + + error = elan_i2c_read_cmd(client, ETP_I2C_IAP_CTRL_CMD, val); + if (error) { + dev_err(dev, "Failed to read IAP write result: %d\n", error); + return error; + } + + result = le16_to_cpup((__le16 *)val); + if (result & (ETP_FW_IAP_PAGE_ERR | ETP_FW_IAP_INTF_ERR)) { + dev_err(dev, "IAP reports failed write: %04hx\n", + result); + return -EIO; + } + + return 0; +} + +static int elan_i2c_finish_fw_update(struct i2c_client *client, + struct completion *completion) +{ + struct device *dev = &client->dev; + long ret; + int error; + int len; + u8 buffer[ETP_I2C_INF_LENGTH]; + + reinit_completion(completion); + enable_irq(client->irq); + + error = elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD, ETP_I2C_RESET); + if (!error) + ret = wait_for_completion_interruptible_timeout(completion, + msecs_to_jiffies(300)); + disable_irq(client->irq); + + if (error) { + dev_err(dev, "device reset failed: %d\n", error); + return error; + } else if (ret == 0) { + dev_err(dev, "timeout waiting for device reset\n"); + return -ETIMEDOUT; + } else if (ret < 0) { + error = ret; + dev_err(dev, "error waiting for device reset: %d\n", error); + return error; + } + + len = i2c_master_recv(client, buffer, ETP_I2C_INF_LENGTH); + if (len != ETP_I2C_INF_LENGTH) { + error = len < 0 ? len : -EIO; + dev_err(dev, "failed to read INT signal: %d (%d)\n", + error, len); + return error; + } + + return 0; +} + +static int elan_i2c_get_report(struct i2c_client *client, u8 *report) +{ + int len; + + len = i2c_master_recv(client, report, ETP_I2C_REPORT_LEN); + if (len < 0) { + dev_err(&client->dev, "failed to read report data: %d\n", len); + return len; + } + + if (len != ETP_I2C_REPORT_LEN) { + dev_err(&client->dev, + "wrong report length (%d vs %d expected)\n", + len, ETP_I2C_REPORT_LEN); + return -EIO; + } + + return 0; +} + +const struct elan_transport_ops elan_i2c_ops = { + .initialize = elan_i2c_initialize, + .sleep_control = elan_i2c_sleep_control, + .power_control = elan_i2c_power_control, + .set_mode = elan_i2c_set_mode, + + .calibrate = elan_i2c_calibrate, + .calibrate_result = elan_i2c_calibrate_result, + + .get_baseline_data = elan_i2c_get_baseline_data, + + .get_version = elan_i2c_get_version, + .get_sm_version = elan_i2c_get_sm_version, + .get_product_id = elan_i2c_get_product_id, + .get_checksum = elan_i2c_get_checksum, + + .get_max = elan_i2c_get_max, + .get_resolution = elan_i2c_get_resolution, + .get_num_traces = elan_i2c_get_num_traces, + + .iap_get_mode = elan_i2c_iap_get_mode, + .iap_reset = elan_i2c_iap_reset, + + .prepare_fw_update = elan_i2c_prepare_fw_update, + .write_fw_block = elan_i2c_write_fw_block, + .finish_fw_update = elan_i2c_finish_fw_update, + + .get_report = elan_i2c_get_report, +}; diff --git a/drivers/input/mouse/elan_i2c_smbus.c b/drivers/input/mouse/elan_i2c_smbus.c new file mode 100644 index 000000000000..359bf8583d54 --- /dev/null +++ b/drivers/input/mouse/elan_i2c_smbus.c @@ -0,0 +1,514 @@ +/* + * Elan I2C/SMBus Touchpad driver - SMBus interface + * + * Copyright (c) 2013 ELAN Microelectronics Corp. + * + * Author: 林政維 (Duson Lin) + * Version: 1.5.5 + * + * Based on cyapa driver: + * copyright (c) 2011-2012 Cypress Semiconductor, Inc. + * copyright (c) 2011-2012 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Trademarks are the property of their respective owners. + */ + +#include +#include +#include +#include + +#include "elan_i2c.h" + +/* Elan SMbus commands */ +#define ETP_SMBUS_IAP_CMD 0x00 +#define ETP_SMBUS_ENABLE_TP 0x20 +#define ETP_SMBUS_SLEEP_CMD 0x21 +#define ETP_SMBUS_IAP_PASSWORD_WRITE 0x29 +#define ETP_SMBUS_IAP_PASSWORD_READ 0x80 +#define ETP_SMBUS_WRITE_FW_BLOCK 0x2A +#define ETP_SMBUS_IAP_RESET_CMD 0x2B +#define ETP_SMBUS_RANGE_CMD 0xA0 +#define ETP_SMBUS_FW_VERSION_CMD 0xA1 +#define ETP_SMBUS_XY_TRACENUM_CMD 0xA2 +#define ETP_SMBUS_SM_VERSION_CMD 0xA3 +#define ETP_SMBUS_UNIQUEID_CMD 0xA3 +#define ETP_SMBUS_RESOLUTION_CMD 0xA4 +#define ETP_SMBUS_HELLOPACKET_CMD 0xA7 +#define ETP_SMBUS_PACKET_QUERY 0xA8 +#define ETP_SMBUS_IAP_VERSION_CMD 0xAC +#define ETP_SMBUS_IAP_CTRL_CMD 0xAD +#define ETP_SMBUS_IAP_CHECKSUM_CMD 0xAE +#define ETP_SMBUS_FW_CHECKSUM_CMD 0xAF +#define ETP_SMBUS_MAX_BASELINE_CMD 0xC3 +#define ETP_SMBUS_MIN_BASELINE_CMD 0xC4 +#define ETP_SMBUS_CALIBRATE_QUERY 0xC5 + +#define ETP_SMBUS_REPORT_LEN 32 +#define ETP_SMBUS_REPORT_OFFSET 2 +#define ETP_SMBUS_HELLOPACKET_LEN 5 +#define ETP_SMBUS_IAP_PASSWORD 0x1234 +#define ETP_SMBUS_IAP_MODE_ON (1 << 6) + +static int elan_smbus_initialize(struct i2c_client *client) +{ + u8 check[ETP_SMBUS_HELLOPACKET_LEN] = { 0x55, 0x55, 0x55, 0x55, 0x55 }; + u8 values[ETP_SMBUS_HELLOPACKET_LEN] = { 0, 0, 0, 0, 0 }; + int len, error; + + /* Get hello packet */ + len = i2c_smbus_read_block_data(client, + ETP_SMBUS_HELLOPACKET_CMD, values); + if (len != ETP_SMBUS_HELLOPACKET_LEN) { + dev_err(&client->dev, "hello packet length fail: %d\n", len); + error = len < 0 ? len : -EIO; + return error; + } + + /* compare hello packet */ + if (memcmp(values, check, ETP_SMBUS_HELLOPACKET_LEN)) { + dev_err(&client->dev, "hello packet fail [%*px]\n", + ETP_SMBUS_HELLOPACKET_LEN, values); + return -ENXIO; + } + + /* enable tp */ + error = i2c_smbus_write_byte(client, ETP_SMBUS_ENABLE_TP); + if (error) { + dev_err(&client->dev, "failed to enable touchpad: %d\n", error); + return error; + } + + return 0; +} + +static int elan_smbus_set_mode(struct i2c_client *client, u8 mode) +{ + u8 cmd[4] = { 0x00, 0x07, 0x00, mode }; + + return i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD, + sizeof(cmd), cmd); +} + +static int elan_smbus_sleep_control(struct i2c_client *client, bool sleep) +{ + if (sleep) + return i2c_smbus_write_byte(client, ETP_SMBUS_SLEEP_CMD); + else + return 0; /* XXX should we send ETP_SMBUS_ENABLE_TP here? */ +} + +static int elan_smbus_power_control(struct i2c_client *client, bool enable) +{ + return 0; /* A no-op */ +} + +static int elan_smbus_calibrate(struct i2c_client *client) +{ + u8 cmd[4] = { 0x00, 0x08, 0x00, 0x01 }; + + return i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD, + sizeof(cmd), cmd); +} + +static int elan_smbus_calibrate_result(struct i2c_client *client, u8 *val) +{ + int error; + + error = i2c_smbus_read_block_data(client, + ETP_SMBUS_CALIBRATE_QUERY, val); + if (error < 0) + return error; + + return 0; +} + +static int elan_smbus_get_baseline_data(struct i2c_client *client, + bool max_baseline, u8 *value) +{ + int error; + u8 val[3]; + + error = i2c_smbus_read_block_data(client, + max_baseline ? + ETP_SMBUS_MAX_BASELINE_CMD : + ETP_SMBUS_MIN_BASELINE_CMD, + val); + if (error < 0) + return error; + + *value = be16_to_cpup((__be16 *)val); + + return 0; +} + +static int elan_smbus_get_version(struct i2c_client *client, + bool iap, u8 *version) +{ + int error; + u8 val[3]; + + error = i2c_smbus_read_block_data(client, + iap ? ETP_SMBUS_IAP_VERSION_CMD : + ETP_SMBUS_FW_VERSION_CMD, + val); + if (error < 0) { + dev_err(&client->dev, "failed to get %s version: %d\n", + iap ? "IAP" : "FW", error); + return error; + } + + *version = val[2]; + return 0; +} + +static int elan_smbus_get_sm_version(struct i2c_client *client, u8 *version) +{ + int error; + u8 val[3]; + + error = i2c_smbus_read_block_data(client, + ETP_SMBUS_SM_VERSION_CMD, val); + if (error < 0) { + dev_err(&client->dev, "failed to get SM version: %d\n", error); + return error; + } + + *version = val[0]; /* XXX Why 0 and not 2 as in IAP/FW versions? */ + return 0; +} + +static int elan_smbus_get_product_id(struct i2c_client *client, u8 *id) +{ + int error; + u8 val[3]; + + error = i2c_smbus_read_block_data(client, + ETP_SMBUS_UNIQUEID_CMD, val); + if (error < 0) { + dev_err(&client->dev, "failed to get product ID: %d\n", error); + return error; + } + + *id = val[1]; + return 0; +} + +static int elan_smbus_get_checksum(struct i2c_client *client, + bool iap, u16 *csum) +{ + int error; + u8 val[3]; + + error = i2c_smbus_read_block_data(client, + iap ? ETP_SMBUS_FW_CHECKSUM_CMD : + ETP_SMBUS_IAP_CHECKSUM_CMD, + val); + if (error < 0) { + dev_err(&client->dev, "failed to get %s checksum: %d\n", + iap ? "IAP" : "FW", error); + return error; + } + + *csum = be16_to_cpup((__be16 *)val); + return 0; +} + +static int elan_smbus_get_max(struct i2c_client *client, + unsigned int *max_x, unsigned int *max_y) +{ + int error; + u8 val[3]; + + error = i2c_smbus_read_block_data(client, ETP_SMBUS_RANGE_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get dimensions: %d\n", error); + return error; + } + + *max_x = (0x0f & val[0]) << 8 | val[1]; + *max_y = (0xf0 & val[0]) << 4 | val[2]; + + return 0; +} + +static int elan_smbus_get_resolution(struct i2c_client *client, + u8 *hw_res_x, u8 *hw_res_y) +{ + int error; + u8 val[3]; + + error = i2c_smbus_read_block_data(client, + ETP_SMBUS_RESOLUTION_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get resolution: %d\n", error); + return error; + } + + *hw_res_x = val[1] & 0x0F; + *hw_res_y = (val[1] & 0xF0) >> 4; + + return 0; +} + +static int elan_smbus_get_num_traces(struct i2c_client *client, + unsigned int *x_traces, + unsigned int *y_traces) +{ + int error; + u8 val[3]; + + error = i2c_smbus_read_block_data(client, + ETP_SMBUS_XY_TRACENUM_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get trace info: %d\n", error); + return error; + } + + *x_traces = val[1] - 1; + *y_traces = val[2] - 1; + + return 0; +} + +static int elan_smbus_iap_get_mode(struct i2c_client *client, + enum tp_mode *mode) +{ + int error; + u16 constant; + u8 val[3]; + + error = i2c_smbus_read_block_data(client, ETP_SMBUS_IAP_CTRL_CMD, val); + if (error < 0) { + dev_err(&client->dev, "failed to read iap ctrol register: %d\n", + error); + return error; + } + + constant = be16_to_cpup((__be16 *)val); + dev_dbg(&client->dev, "iap control reg: 0x%04x.\n", constant); + + *mode = (constant & ETP_SMBUS_IAP_MODE_ON) ? IAP_MODE : MAIN_MODE; + + return 0; +} + +static int elan_smbus_iap_reset(struct i2c_client *client) +{ + int error; + + error = i2c_smbus_write_byte(client, ETP_SMBUS_IAP_RESET_CMD); + if (error) { + dev_err(&client->dev, "cannot reset IC: %d\n", error); + return error; + } + + return 0; +} + +static int elan_smbus_set_flash_key(struct i2c_client *client) +{ + int error; + u8 cmd[4] = { 0x00, 0x0B, 0x00, 0x5A }; + + error = i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD, + sizeof(cmd), cmd); + if (error) { + dev_err(&client->dev, "cannot set flash key: %d\n", error); + return error; + } + + return 0; +} + +static int elan_smbus_prepare_fw_update(struct i2c_client *client) +{ + struct device *dev = &client->dev; + int len; + int error; + enum tp_mode mode; + u8 val[3]; + u8 cmd[4] = {0x0F, 0x78, 0x00, 0x06}; + u16 password; + + /* Get FW in which mode (IAP_MODE/MAIN_MODE) */ + error = elan_smbus_iap_get_mode(client, &mode); + if (error) + return error; + + if (mode == MAIN_MODE) { + + /* set flash key */ + error = elan_smbus_set_flash_key(client); + if (error) + return error; + + /* write iap password */ + if (i2c_smbus_write_byte(client, + ETP_SMBUS_IAP_PASSWORD_WRITE) < 0) { + dev_err(dev, "cannot write iap password\n"); + return -EIO; + } + + error = i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD, + sizeof(cmd), cmd); + if (error) { + dev_err(dev, "failed to write iap password: %d\n", + error); + return error; + } + + /* + * Read back password to make sure we enabled flash + * successfully. + */ + len = i2c_smbus_read_block_data(client, + ETP_SMBUS_IAP_PASSWORD_READ, + val); + if (len < sizeof(u16)) { + error = len < 0 ? len : -EIO; + dev_err(dev, "failed to read iap password: %d\n", + error); + return error; + } + + password = be16_to_cpup((__be16 *)val); + if (password != ETP_SMBUS_IAP_PASSWORD) { + dev_err(dev, "wrong iap password = 0x%X\n", password); + return -EIO; + } + + /* Wait 30ms for MAIN_MODE change to IAP_MODE */ + msleep(30); + } + + error = elan_smbus_set_flash_key(client); + if (error) + return error; + + /* Reset IC */ + error = elan_smbus_iap_reset(client); + if (error) + return error; + + return 0; +} + + +static int elan_smbus_write_fw_block(struct i2c_client *client, + const u8 *page, u16 checksum, int idx) +{ + struct device *dev = &client->dev; + int error; + u16 result; + u8 val[3]; + + /* + * Due to the limitation of smbus protocol limiting + * transfer to 32 bytes at a time, we must split block + * in 2 transfers. + */ + error = i2c_smbus_write_block_data(client, + ETP_SMBUS_WRITE_FW_BLOCK, + ETP_FW_PAGE_SIZE / 2, + page); + if (error) { + dev_err(dev, "Failed to write page %d (part %d): %d\n", + idx, 1, error); + return error; + } + + error = i2c_smbus_write_block_data(client, + ETP_SMBUS_WRITE_FW_BLOCK, + ETP_FW_PAGE_SIZE / 2, + page + ETP_FW_PAGE_SIZE / 2); + if (error) { + dev_err(dev, "Failed to write page %d (part %d): %d\n", + idx, 2, error); + return error; + } + + + /* Wait for F/W to update one page ROM data. */ + usleep_range(8000, 10000); + + error = i2c_smbus_read_block_data(client, + ETP_SMBUS_IAP_CTRL_CMD, val); + if (error < 0) { + dev_err(dev, "Failed to read IAP write result: %d\n", + error); + return error; + } + + result = be16_to_cpup((__be16 *)val); + if (result & (ETP_FW_IAP_PAGE_ERR | ETP_FW_IAP_INTF_ERR)) { + dev_err(dev, "IAP reports failed write: %04hx\n", + result); + return -EIO; + } + + return 0; +} + +static int elan_smbus_get_report(struct i2c_client *client, u8 *report) +{ + int len; + + len = i2c_smbus_read_block_data(client, + ETP_SMBUS_PACKET_QUERY, + &report[ETP_SMBUS_REPORT_OFFSET]); + if (len < 0) { + dev_err(&client->dev, "failed to read report data: %d\n", len); + return len; + } + + if (len != ETP_SMBUS_REPORT_LEN) { + dev_err(&client->dev, + "wrong report length (%d vs %d expected)\n", + len, ETP_SMBUS_REPORT_LEN); + return -EIO; + } + + return 0; +} + +static int elan_smbus_finish_fw_update(struct i2c_client *client, + struct completion *fw_completion) +{ + /* No special handling unlike I2C transport */ + return 0; +} + +const struct elan_transport_ops elan_smbus_ops = { + .initialize = elan_smbus_initialize, + .sleep_control = elan_smbus_sleep_control, + .power_control = elan_smbus_power_control, + .set_mode = elan_smbus_set_mode, + + .calibrate = elan_smbus_calibrate, + .calibrate_result = elan_smbus_calibrate_result, + + .get_baseline_data = elan_smbus_get_baseline_data, + + .get_version = elan_smbus_get_version, + .get_sm_version = elan_smbus_get_sm_version, + .get_product_id = elan_smbus_get_product_id, + .get_checksum = elan_smbus_get_checksum, + + .get_max = elan_smbus_get_max, + .get_resolution = elan_smbus_get_resolution, + .get_num_traces = elan_smbus_get_num_traces, + + .iap_get_mode = elan_smbus_iap_get_mode, + .iap_reset = elan_smbus_iap_reset, + + .prepare_fw_update = elan_smbus_prepare_fw_update, + .write_fw_block = elan_smbus_write_fw_block, + .finish_fw_update = elan_smbus_finish_fw_update, + + .get_report = elan_smbus_get_report, +};