From: Emmanuel Grumbach Date: Wed, 7 Jan 2015 14:44:06 +0000 (+0200) Subject: iwlwifi: correctly set the NMI register X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=66396583e1dc38359a4d182bbcf22b925f4e7233;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git iwlwifi: correctly set the NMI register When we want to trigger an NMI in the device, we need to set bit 7 and not bit 0. However, older firmwares don't register to the interrupt issued by bit 7. Use bit 7 first so that the correct interrupt will be issued hoping that the firmware will react. To be on the safe side, set bit 0 in case the firmware didn't register to the proper interrupt. Signed-off-by: Emmanuel Grumbach --- diff --git a/drivers/net/wireless/iwlwifi/iwl-io.c b/drivers/net/wireless/iwlwifi/iwl-io.c index 7a2cbf6f90db..03250a45272e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.c +++ b/drivers/net/wireless/iwlwifi/iwl-io.c @@ -193,11 +193,15 @@ void iwl_force_nmi(struct iwl_trans *trans) * DEVICE_SET_NMI_8000B_REG - is used. */ if ((trans->cfg->device_family != IWL_DEVICE_FAMILY_8000) || - (CSR_HW_REV_STEP(trans->hw_rev) == SILICON_A_STEP)) - iwl_write_prph(trans, DEVICE_SET_NMI_REG, DEVICE_SET_NMI_VAL); - else + (CSR_HW_REV_STEP(trans->hw_rev) == SILICON_A_STEP)) { + iwl_write_prph(trans, DEVICE_SET_NMI_REG, + DEVICE_SET_NMI_VAL_DRV); + iwl_write_prph(trans, DEVICE_SET_NMI_REG, + DEVICE_SET_NMI_VAL_HW); + } else { iwl_write_prph(trans, DEVICE_SET_NMI_8000B_REG, DEVICE_SET_NMI_8000B_VAL); + } } IWL_EXPORT_SYMBOL(iwl_force_nmi); diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index 387a5aada0ee..b21fcf042b77 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -108,7 +108,8 @@ /* Device NMI register */ #define DEVICE_SET_NMI_REG 0x00a01c30 -#define DEVICE_SET_NMI_VAL 0x1 +#define DEVICE_SET_NMI_VAL_HW BIT(0) +#define DEVICE_SET_NMI_VAL_DRV BIT(7) #define DEVICE_SET_NMI_8000B_REG 0x00a01c24 #define DEVICE_SET_NMI_8000B_VAL 0x1000000