From: Felix Fietkau Date: Sun, 24 Jan 2010 02:26:11 +0000 (+0100) Subject: ath9k: improve max rate retry handling X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=658965107e2a45a1a4297cb494adc55797dd9ad1;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git ath9k: improve max rate retry handling ath9k currently forces hw->max_rate_tries to 4 to work around rate control inefficiencies. This has some negative side effects, such as rate_control_send_low also using a maximum of 4 tries, which could negatively affect reliability of unicast management frames. This patch pushes the retry limit to the rate control instead, and allows it to use more tries on the last stage to prevent unnecessary packet loss. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 5f78d7a5ff22..c3066b553546 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -640,8 +640,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) hw->max_rates = 4; hw->channel_change_time = 5000; hw->max_listen_interval = 10; - /* Hardware supports 10 but we use 4 */ - hw->max_rate_tries = 4; + hw->max_rate_tries = 10; hw->sta_data_size = sizeof(struct ath_node); hw->vif_data_size = sizeof(struct ath_vif); diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index c915954d4d5b..74290137f43d 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -678,13 +678,13 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, * For Multi Rate Retry we use a different number of * retry attempt counts. This ends up looking like this: * - * MRR[0] = 2 - * MRR[1] = 2 - * MRR[2] = 2 - * MRR[3] = 4 + * MRR[0] = 4 + * MRR[1] = 4 + * MRR[2] = 4 + * MRR[3] = 8 * */ - try_per_rate = sc->hw->max_rate_tries; + try_per_rate = 4; rate_table = sc->cur_rate_table; rix = ath_rc_get_highest_rix(sc, ath_rc_priv, rate_table, &is_probe); @@ -714,7 +714,7 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, for ( ; i < 4; i++) { /* Use twice the number of tries for the last MRR segment. */ if (i + 1 == 4) - try_per_rate = 4; + try_per_rate = 8; ath_rc_get_lower_rix(rate_table, ath_rc_priv, rix, &nrix); /* All other rates in the series have RTS enabled */