From: Al Viro Date: Mon, 16 May 2005 00:59:55 +0000 (+0100) Subject: [SCSI] TYPE_RBC cache fixes (sbp2.c affected) X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=631e8a1398ce4cfef8b30678d51daf0c64313a09;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git [SCSI] TYPE_RBC cache fixes (sbp2.c affected) a) TYPE_SDAD renamed to TYPE_RBC and taken to scsi.h b) in sbp2.c remapping of TYPE_RPB to TYPE_DISK turned off c) relevant places in midlayer and sd.c taught to accept TYPE_RBC d) sd.c::sd_read_cache_type() looks into page 6 when dealing with TYPE_RBC - these guys have writeback cache flag there and are not guaranteed to have page 8 at all. e) sd_read_cache_type() got an extra sanity check - it checks that it got the page it asked for before using its contents. And screams if mismatch had happened. Rationale: there are broken devices out there that are "helpful" enough to go for "I don't have a page you've asked for, here, have another one". For example, PL3507 had been caught doing just that... f) sbp2 sets sdev->use_10_for_rw and sdev->use_10_for_ms instead of bothering to remap READ6/WRITE6/MOD_SENSE, so most of the conversions in there are gone now. Incidentally, I wonder if USB storage devices that have no mode page 8 are simply RBC ones. I haven't touched that, but it might be interesting to check... Signed-off-by: Al Viro Signed-off-by: James Bottomley --- diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index 00c7b958361a..094e646ed4de 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -1070,7 +1070,7 @@ static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid, quadlet_ static __inline__ int sbp2_command_conversion_device_type(u8 device_type) { return (((device_type == TYPE_DISK) || - (device_type == TYPE_SDAD) || + (device_type == TYPE_RBC) || (device_type == TYPE_ROM)) ? 1:0); } @@ -2111,102 +2111,6 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id, */ static void sbp2_check_sbp2_command(struct scsi_id_instance_data *scsi_id, unchar *cmd) { - unchar new_cmd[16]; - u8 device_type = SBP2_DEVICE_TYPE (scsi_id->sbp2_device_type_and_lun); - - SBP2_DEBUG("sbp2_check_sbp2_command"); - - switch (*cmd) { - - case READ_6: - - if (sbp2_command_conversion_device_type(device_type)) { - - SBP2_DEBUG("Convert READ_6 to READ_10"); - - /* - * Need to turn read_6 into read_10 - */ - new_cmd[0] = 0x28; - new_cmd[1] = (cmd[1] & 0xe0); - new_cmd[2] = 0x0; - new_cmd[3] = (cmd[1] & 0x1f); - new_cmd[4] = cmd[2]; - new_cmd[5] = cmd[3]; - new_cmd[6] = 0x0; - new_cmd[7] = 0x0; - new_cmd[8] = cmd[4]; - new_cmd[9] = cmd[5]; - - memcpy(cmd, new_cmd, 10); - - } - - break; - - case WRITE_6: - - if (sbp2_command_conversion_device_type(device_type)) { - - SBP2_DEBUG("Convert WRITE_6 to WRITE_10"); - - /* - * Need to turn write_6 into write_10 - */ - new_cmd[0] = 0x2a; - new_cmd[1] = (cmd[1] & 0xe0); - new_cmd[2] = 0x0; - new_cmd[3] = (cmd[1] & 0x1f); - new_cmd[4] = cmd[2]; - new_cmd[5] = cmd[3]; - new_cmd[6] = 0x0; - new_cmd[7] = 0x0; - new_cmd[8] = cmd[4]; - new_cmd[9] = cmd[5]; - - memcpy(cmd, new_cmd, 10); - - } - - break; - - case MODE_SENSE: - - if (sbp2_command_conversion_device_type(device_type)) { - - SBP2_DEBUG("Convert MODE_SENSE_6 to MODE_SENSE_10"); - - /* - * Need to turn mode_sense_6 into mode_sense_10 - */ - new_cmd[0] = 0x5a; - new_cmd[1] = cmd[1]; - new_cmd[2] = cmd[2]; - new_cmd[3] = 0x0; - new_cmd[4] = 0x0; - new_cmd[5] = 0x0; - new_cmd[6] = 0x0; - new_cmd[7] = 0x0; - new_cmd[8] = cmd[4]; - new_cmd[9] = cmd[5]; - - memcpy(cmd, new_cmd, 10); - - } - - break; - - case MODE_SELECT: - - /* - * TODO. Probably need to change mode select to 10 byte version - */ - - default: - break; - } - - return; } /* @@ -2271,14 +2175,6 @@ static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id, scsi_buf[4] = 36 - 5; } - /* - * Check for Simple Direct Access Device and change it to TYPE_DISK - */ - if ((scsi_buf[0] & 0x1f) == TYPE_SDAD) { - SBP2_DEBUG("Changing TYPE_SDAD to TYPE_DISK"); - scsi_buf[0] &= 0xe0; - } - /* * Fix ansi revision and response data format */ @@ -2287,27 +2183,6 @@ static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id, break; - case MODE_SENSE: - - if (sbp2_command_conversion_device_type(device_type)) { - - SBP2_DEBUG("Modify mode sense response (10 byte version)"); - - scsi_buf[0] = scsi_buf[1]; /* Mode data length */ - scsi_buf[1] = scsi_buf[2]; /* Medium type */ - scsi_buf[2] = scsi_buf[3]; /* Device specific parameter */ - scsi_buf[3] = scsi_buf[7]; /* Block descriptor length */ - memcpy(scsi_buf + 4, scsi_buf + 8, scsi_buf[0]); - } - - break; - - case MODE_SELECT: - - /* - * TODO. Probably need to change mode select to 10 byte version - */ - default: break; } @@ -2690,7 +2565,8 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id, static int sbp2scsi_slave_configure (struct scsi_device *sdev) { blk_queue_dma_alignment(sdev->request_queue, (512 - 1)); - + sdev->use_10_for_rw = 1; + sdev->use_10_for_ms = 1; return 0; } diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h index a84b039a05b9..cd425be74841 100644 --- a/drivers/ieee1394/sbp2.h +++ b/drivers/ieee1394/sbp2.h @@ -266,10 +266,6 @@ struct sbp2_status_block { #define SBP2_MAX_UDS_PER_NODE 16 /* Maximum scsi devices per node */ #define SBP2_MAX_SECTORS 255 /* Max sectors supported */ -#ifndef TYPE_SDAD -#define TYPE_SDAD 0x0e /* simplified direct access device */ -#endif - /* * SCSI direction table... * (now used as a back-up in case the direction passed down from above is "unknown") diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index cca772624ae7..588611568d14 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -625,6 +625,7 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) case TYPE_MEDIUM_CHANGER: case TYPE_ENCLOSURE: case TYPE_COMM: + case TYPE_RBC: sdev->writeable = 1; break; case TYPE_WORM: diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 19afb25e44d3..bb8235598787 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1368,17 +1368,26 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname, */ static void sd_read_cache_type(struct scsi_disk *sdkp, char *diskname, - struct scsi_request *SRpnt, unsigned char *buffer) { + struct scsi_request *SRpnt, unsigned char *buffer) +{ int len = 0, res; - const int dbd = 0; /* DBD */ - const int modepage = 0x08; /* current values, cache page */ + int dbd; + int modepage; struct scsi_mode_data data; struct scsi_sense_hdr sshdr; if (sdkp->device->skip_ms_page_8) goto defaults; + if (sdkp->device->type == TYPE_RBC) { + modepage = 6; + dbd = 8; + } else { + modepage = 8; + dbd = 0; + } + /* cautiously ask */ res = sd_do_mode_sense(SRpnt, dbd, modepage, buffer, 4, &data); @@ -1409,11 +1418,20 @@ sd_read_cache_type(struct scsi_disk *sdkp, char *diskname, "write back, no read (daft)" }; int ct = 0; - int offset = data.header_length + - data.block_descriptor_length + 2; + int offset = data.header_length + data.block_descriptor_length; - sdkp->WCE = ((buffer[offset] & 0x04) != 0); - sdkp->RCD = ((buffer[offset] & 0x01) != 0); + if ((buffer[offset] & 0x3f) != modepage) { + printk(KERN_ERR "%s: got wrong page\n", diskname); + goto defaults; + } + + if (modepage == 8) { + sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0); + sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0); + } else { + sdkp->WCE = ((buffer[offset + 2] & 0x01) == 0); + sdkp->RCD = 0; + } ct = sdkp->RCD + 2*sdkp->WCE; @@ -1533,7 +1551,7 @@ static int sd_probe(struct device *dev) int error; error = -ENODEV; - if ((sdp->type != TYPE_DISK) && (sdp->type != TYPE_MOD)) + if (sdp->type != TYPE_DISK && sdp->type != TYPE_MOD && sdp->type != TYPE_RBC) goto out; SCSI_LOG_HLQUEUE(3, printk("sd_attach: scsi device: <%d,%d,%d,%d>\n", @@ -1570,7 +1588,7 @@ static int sd_probe(struct device *dev) sdkp->openers = 0; if (!sdp->timeout) { - if (sdp->type == TYPE_DISK) + if (sdp->type != TYPE_MOD) sdp->timeout = SD_TIMEOUT; else sdp->timeout = SD_MOD_TIMEOUT; diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index ca1e3b4a3183..1fb233741513 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -213,6 +213,7 @@ static inline int scsi_status_is_good(int status) #define TYPE_COMM 0x09 /* Communications device */ #define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */ #define TYPE_RAID 0x0c +#define TYPE_RBC 0x0e #define TYPE_NO_LUN 0x7f /*