From: Andrew F. Davis Date: Fri, 10 Feb 2017 17:55:47 +0000 (-0600) Subject: regulator: tps65086: Fix DT node referencing in of_parse_cb X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=6308f1787fb85bc98b7241a08a9f7f33b47f8b61;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git regulator: tps65086: Fix DT node referencing in of_parse_cb When we check for additional DT properties in the current node we use the device_node passed in with the configuration data, this will not point to the correct DT node, use the one passed in for this purpose. Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC") Reported-by: Steven Kipisz Signed-off-by: Andrew F. Davis Tested-by: Steven Kipisz Signed-off-by: Mark Brown --- diff --git a/drivers/regulator/tps65086-regulator.c b/drivers/regulator/tps65086-regulator.c index 84e8cb109269..45e96e154690 100644 --- a/drivers/regulator/tps65086-regulator.c +++ b/drivers/regulator/tps65086-regulator.c @@ -162,14 +162,14 @@ static struct tps65086_regulator regulators[] = { TPS65086_SWITCH("VTT", "vtt", VTT, TPS65086_SWVTT_EN, BIT(4)), }; -static int tps65086_of_parse_cb(struct device_node *dev, +static int tps65086_of_parse_cb(struct device_node *node, const struct regulator_desc *desc, struct regulator_config *config) { int ret; /* Check for 25mV step mode */ - if (of_property_read_bool(config->of_node, "ti,regulator-step-size-25mv")) { + if (of_property_read_bool(node, "ti,regulator-step-size-25mv")) { switch (desc->id) { case BUCK1: case BUCK2: @@ -193,7 +193,7 @@ static int tps65086_of_parse_cb(struct device_node *dev, } /* Check for decay mode */ - if (desc->id <= BUCK6 && of_property_read_bool(config->of_node, "ti,regulator-decay")) { + if (desc->id <= BUCK6 && of_property_read_bool(node, "ti,regulator-decay")) { ret = regmap_write_bits(config->regmap, regulators[desc->id].decay_reg, regulators[desc->id].decay_mask,