From: Alexandre Rames Date: Mon, 14 Jan 2013 17:20:22 +0000 (+0000) Subject: sfc: Add AER and EEH support for Siena X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=626950db84c065925ee10c2e833da265cbda8800;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git sfc: Add AER and EEH support for Siena The Linux side of EEH is triggered by MMIO reads, but this driver's data path does not issue any MMIO reads (except in legacy interrupt mode). Therefore add a monitor function to poll EEH periodically. When preparing to reset the device based on our own error detection, also poll EEH and defer to its recovery mechanism if appropriate. [bwh: Use a separate condition for the initial link poll; fix some style errors] Signed-off-by: Ben Hutchings --- diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 11a81084bec4..5e1ddc559b4f 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -21,7 +21,9 @@ #include #include #include +#include #include +#include #include "net_driver.h" #include "efx.h" #include "nic.h" @@ -71,17 +73,19 @@ const char *const efx_loopback_mode_names[] = { const unsigned int efx_reset_type_max = RESET_TYPE_MAX; const char *const efx_reset_type_names[] = { - [RESET_TYPE_INVISIBLE] = "INVISIBLE", - [RESET_TYPE_ALL] = "ALL", - [RESET_TYPE_WORLD] = "WORLD", - [RESET_TYPE_DISABLE] = "DISABLE", - [RESET_TYPE_TX_WATCHDOG] = "TX_WATCHDOG", - [RESET_TYPE_INT_ERROR] = "INT_ERROR", - [RESET_TYPE_RX_RECOVERY] = "RX_RECOVERY", - [RESET_TYPE_RX_DESC_FETCH] = "RX_DESC_FETCH", - [RESET_TYPE_TX_DESC_FETCH] = "TX_DESC_FETCH", - [RESET_TYPE_TX_SKIP] = "TX_SKIP", - [RESET_TYPE_MC_FAILURE] = "MC_FAILURE", + [RESET_TYPE_INVISIBLE] = "INVISIBLE", + [RESET_TYPE_ALL] = "ALL", + [RESET_TYPE_RECOVER_OR_ALL] = "RECOVER_OR_ALL", + [RESET_TYPE_WORLD] = "WORLD", + [RESET_TYPE_RECOVER_OR_DISABLE] = "RECOVER_OR_DISABLE", + [RESET_TYPE_DISABLE] = "DISABLE", + [RESET_TYPE_TX_WATCHDOG] = "TX_WATCHDOG", + [RESET_TYPE_INT_ERROR] = "INT_ERROR", + [RESET_TYPE_RX_RECOVERY] = "RX_RECOVERY", + [RESET_TYPE_RX_DESC_FETCH] = "RX_DESC_FETCH", + [RESET_TYPE_TX_DESC_FETCH] = "TX_DESC_FETCH", + [RESET_TYPE_TX_SKIP] = "TX_SKIP", + [RESET_TYPE_MC_FAILURE] = "MC_FAILURE", }; #define EFX_MAX_MTU (9 * 1024) @@ -117,9 +121,12 @@ MODULE_PARM_DESC(separate_tx_channels, static int napi_weight = 64; /* This is the time (in jiffies) between invocations of the hardware - * monitor. On Falcon-based NICs, this will: + * monitor. + * On Falcon-based NICs, this will: * - Check the on-board hardware monitor; * - Poll the link state and reconfigure the hardware as necessary. + * On Siena-based NICs for power systems with EEH support, this will give EEH a + * chance to start. */ static unsigned int efx_monitor_interval = 1 * HZ; @@ -203,13 +210,14 @@ static void efx_stop_all(struct efx_nic *efx); #define EFX_ASSERT_RESET_SERIALISED(efx) \ do { \ if ((efx->state == STATE_READY) || \ + (efx->state == STATE_RECOVERY) || \ (efx->state == STATE_DISABLED)) \ ASSERT_RTNL(); \ } while (0) static int efx_check_disabled(struct efx_nic *efx) { - if (efx->state == STATE_DISABLED) { + if (efx->state == STATE_DISABLED || efx->state == STATE_RECOVERY) { netif_err(efx, drv, efx->net_dev, "device is disabled due to earlier errors\n"); return -EIO; @@ -677,7 +685,7 @@ static void efx_stop_datapath(struct efx_nic *efx) BUG_ON(efx->port_enabled); /* Only perform flush if dma is enabled */ - if (dev->is_busmaster) { + if (dev->is_busmaster && efx->state != STATE_RECOVERY) { rc = efx_nic_flush_queues(efx); if (rc && EFX_WORKAROUND_7803(efx)) { @@ -1590,13 +1598,15 @@ static void efx_start_all(struct efx_nic *efx) efx_start_port(efx); efx_start_datapath(efx); - /* Start the hardware monitor if there is one. Otherwise (we're link - * event driven), we have to poll the PHY because after an event queue - * flush, we could have a missed a link state change */ - if (efx->type->monitor != NULL) { + /* Start the hardware monitor if there is one */ + if (efx->type->monitor != NULL) queue_delayed_work(efx->workqueue, &efx->monitor_work, efx_monitor_interval); - } else { + + /* If link state detection is normally event-driven, we have + * to poll now because we could have missed a change + */ + if (efx_nic_rev(efx) >= EFX_REV_SIENA_A0) { mutex_lock(&efx->mac_lock); if (efx->phy_op->poll(efx)) efx_link_status_changed(efx); @@ -2303,7 +2313,9 @@ int efx_reset(struct efx_nic *efx, enum reset_type method) out: /* Leave device stopped if necessary */ - disabled = rc || method == RESET_TYPE_DISABLE; + disabled = rc || + method == RESET_TYPE_DISABLE || + method == RESET_TYPE_RECOVER_OR_DISABLE; rc2 = efx_reset_up(efx, method, !disabled); if (rc2) { disabled = true; @@ -2322,13 +2334,48 @@ out: return rc; } +/* Try recovery mechanisms. + * For now only EEH is supported. + * Returns 0 if the recovery mechanisms are unsuccessful. + * Returns a non-zero value otherwise. + */ +static int efx_try_recovery(struct efx_nic *efx) +{ +#ifdef CONFIG_EEH + /* A PCI error can occur and not be seen by EEH because nothing + * happens on the PCI bus. In this case the driver may fail and + * schedule a 'recover or reset', leading to this recovery handler. + * Manually call the eeh failure check function. + */ + struct eeh_dev *eehdev = + of_node_to_eeh_dev(pci_device_to_OF_node(efx->pci_dev)); + + if (eeh_dev_check_failure(eehdev)) { + /* The EEH mechanisms will handle the error and reset the + * device if necessary. + */ + return 1; + } +#endif + return 0; +} + /* The worker thread exists so that code that cannot sleep can * schedule a reset for later. */ static void efx_reset_work(struct work_struct *data) { struct efx_nic *efx = container_of(data, struct efx_nic, reset_work); - unsigned long pending = ACCESS_ONCE(efx->reset_pending); + unsigned long pending; + enum reset_type method; + + pending = ACCESS_ONCE(efx->reset_pending); + method = fls(pending) - 1; + + if ((method == RESET_TYPE_RECOVER_OR_DISABLE || + method == RESET_TYPE_RECOVER_OR_ALL) && + efx_try_recovery(efx)) + return; if (!pending) return; @@ -2340,7 +2387,7 @@ static void efx_reset_work(struct work_struct *data) * it cannot change again. */ if (efx->state == STATE_READY) - (void)efx_reset(efx, fls(pending) - 1); + (void)efx_reset(efx, method); rtnl_unlock(); } @@ -2349,11 +2396,20 @@ void efx_schedule_reset(struct efx_nic *efx, enum reset_type type) { enum reset_type method; + if (efx->state == STATE_RECOVERY) { + netif_dbg(efx, drv, efx->net_dev, + "recovering: skip scheduling %s reset\n", + RESET_TYPE(type)); + return; + } + switch (type) { case RESET_TYPE_INVISIBLE: case RESET_TYPE_ALL: + case RESET_TYPE_RECOVER_OR_ALL: case RESET_TYPE_WORLD: case RESET_TYPE_DISABLE: + case RESET_TYPE_RECOVER_OR_DISABLE: method = type; netif_dbg(efx, drv, efx->net_dev, "scheduling %s reset\n", RESET_TYPE(method)); @@ -2563,6 +2619,8 @@ static void efx_pci_remove(struct pci_dev *pci_dev) efx_fini_struct(efx); pci_set_drvdata(pci_dev, NULL); free_netdev(efx->net_dev); + + pci_disable_pcie_error_reporting(pci_dev); }; /* NIC VPD information @@ -2735,6 +2793,11 @@ static int efx_pci_probe(struct pci_dev *pci_dev, netif_warn(efx, probe, efx->net_dev, "failed to create MTDs (%d)\n", rc); + rc = pci_enable_pcie_error_reporting(pci_dev); + if (rc && rc != -EINVAL) + netif_warn(efx, probe, efx->net_dev, + "pci_enable_pcie_error_reporting failed (%d)\n", rc); + return 0; fail4: @@ -2859,12 +2922,112 @@ static const struct dev_pm_ops efx_pm_ops = { .restore = efx_pm_resume, }; +/* A PCI error affecting this device was detected. + * At this point MMIO and DMA may be disabled. + * Stop the software path and request a slot reset. + */ +pci_ers_result_t efx_io_error_detected(struct pci_dev *pdev, + enum pci_channel_state state) +{ + pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED; + struct efx_nic *efx = pci_get_drvdata(pdev); + + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + + rtnl_lock(); + + if (efx->state != STATE_DISABLED) { + efx->state = STATE_RECOVERY; + efx->reset_pending = 0; + + efx_device_detach_sync(efx); + + efx_stop_all(efx); + efx_stop_interrupts(efx, false); + + status = PCI_ERS_RESULT_NEED_RESET; + } else { + /* If the interface is disabled we don't want to do anything + * with it. + */ + status = PCI_ERS_RESULT_RECOVERED; + } + + rtnl_unlock(); + + pci_disable_device(pdev); + + return status; +} + +/* Fake a successfull reset, which will be performed later in efx_io_resume. */ +pci_ers_result_t efx_io_slot_reset(struct pci_dev *pdev) +{ + struct efx_nic *efx = pci_get_drvdata(pdev); + pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED; + int rc; + + if (pci_enable_device(pdev)) { + netif_err(efx, hw, efx->net_dev, + "Cannot re-enable PCI device after reset.\n"); + status = PCI_ERS_RESULT_DISCONNECT; + } + + rc = pci_cleanup_aer_uncorrect_error_status(pdev); + if (rc) { + netif_err(efx, hw, efx->net_dev, + "pci_cleanup_aer_uncorrect_error_status failed (%d)\n", rc); + /* Non-fatal error. Continue. */ + } + + return status; +} + +/* Perform the actual reset and resume I/O operations. */ +static void efx_io_resume(struct pci_dev *pdev) +{ + struct efx_nic *efx = pci_get_drvdata(pdev); + int rc; + + rtnl_lock(); + + if (efx->state == STATE_DISABLED) + goto out; + + rc = efx_reset(efx, RESET_TYPE_ALL); + if (rc) { + netif_err(efx, hw, efx->net_dev, + "efx_reset failed after PCI error (%d)\n", rc); + } else { + efx->state = STATE_READY; + netif_dbg(efx, hw, efx->net_dev, + "Done resetting and resuming IO after PCI error.\n"); + } + +out: + rtnl_unlock(); +} + +/* For simplicity and reliability, we always require a slot reset and try to + * reset the hardware when a pci error affecting the device is detected. + * We leave both the link_reset and mmio_enabled callback unimplemented: + * with our request for slot reset the mmio_enabled callback will never be + * called, and the link_reset callback is not used by AER or EEH mechanisms. + */ +static struct pci_error_handlers efx_err_handlers = { + .error_detected = efx_io_error_detected, + .slot_reset = efx_io_slot_reset, + .resume = efx_io_resume, +}; + static struct pci_driver efx_pci_driver = { .name = KBUILD_MODNAME, .id_table = efx_pci_table, .probe = efx_pci_probe, .remove = efx_pci_remove, .driver.pm = &efx_pm_ops, + .err_handler = &efx_err_handlers, }; /************************************************************************** diff --git a/drivers/net/ethernet/sfc/enum.h b/drivers/net/ethernet/sfc/enum.h index 182dbe2cc6e4..ab8fb5889e55 100644 --- a/drivers/net/ethernet/sfc/enum.h +++ b/drivers/net/ethernet/sfc/enum.h @@ -137,8 +137,12 @@ enum efx_loopback_mode { * Reset methods are numbered in order of increasing scope. * * @RESET_TYPE_INVISIBLE: Reset datapath and MAC (Falcon only) + * @RESET_TYPE_RECOVER_OR_ALL: Try to recover. Apply RESET_TYPE_ALL + * if unsuccessful. * @RESET_TYPE_ALL: Reset datapath, MAC and PHY * @RESET_TYPE_WORLD: Reset as much as possible + * @RESET_TYPE_RECOVER_OR_DISABLE: Try to recover. Apply RESET_TYPE_DISABLE if + * unsuccessful. * @RESET_TYPE_DISABLE: Reset datapath, MAC and PHY; leave NIC disabled * @RESET_TYPE_TX_WATCHDOG: reset due to TX watchdog * @RESET_TYPE_INT_ERROR: reset due to internal error @@ -150,9 +154,11 @@ enum efx_loopback_mode { */ enum reset_type { RESET_TYPE_INVISIBLE = 0, - RESET_TYPE_ALL = 1, - RESET_TYPE_WORLD = 2, - RESET_TYPE_DISABLE = 3, + RESET_TYPE_RECOVER_OR_ALL = 1, + RESET_TYPE_ALL = 2, + RESET_TYPE_WORLD = 3, + RESET_TYPE_RECOVER_OR_DISABLE = 4, + RESET_TYPE_DISABLE = 5, RESET_TYPE_MAX_METHOD, RESET_TYPE_TX_WATCHDOG, RESET_TYPE_INT_ERROR, diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h index c83fe090406d..9e900817d2ab 100644 --- a/drivers/net/ethernet/sfc/net_driver.h +++ b/drivers/net/ethernet/sfc/net_driver.h @@ -429,6 +429,7 @@ enum nic_state { STATE_UNINIT = 0, /* device being probed/removed or is frozen */ STATE_READY = 1, /* hardware ready and netdev registered */ STATE_DISABLED = 2, /* device disabled due to hardware errors */ + STATE_RECOVERY = 3, /* device recovering from PCI error */ }; /* diff --git a/drivers/net/ethernet/sfc/siena.c b/drivers/net/ethernet/sfc/siena.c index ba40f67e4f05..e07ff0d3f26b 100644 --- a/drivers/net/ethernet/sfc/siena.c +++ b/drivers/net/ethernet/sfc/siena.c @@ -202,7 +202,7 @@ out: static enum reset_type siena_map_reset_reason(enum reset_type reason) { - return RESET_TYPE_ALL; + return RESET_TYPE_RECOVER_OR_ALL; } static int siena_map_reset_flags(u32 *flags) @@ -245,6 +245,22 @@ static int siena_reset_hw(struct efx_nic *efx, enum reset_type method) return efx_mcdi_reset_port(efx); } +#ifdef CONFIG_EEH +/* When a PCI device is isolated from the bus, a subsequent MMIO read is + * required for the kernel EEH mechanisms to notice. As the Solarflare driver + * was written to minimise MMIO read (for latency) then a periodic call to check + * the EEH status of the device is required so that device recovery can happen + * in a timely fashion. + */ +static void siena_monitor(struct efx_nic *efx) +{ + struct eeh_dev *eehdev = + of_node_to_eeh_dev(pci_device_to_OF_node(efx->pci_dev)); + + eeh_dev_check_failure(eehdev); +} +#endif + static int siena_probe_nvconfig(struct efx_nic *efx) { u32 caps = 0; @@ -665,7 +681,11 @@ const struct efx_nic_type siena_a0_nic_type = { .init = siena_init_nic, .dimension_resources = siena_dimension_resources, .fini = efx_port_dummy_op_void, +#ifdef CONFIG_EEH + .monitor = siena_monitor, +#else .monitor = NULL, +#endif .map_reset_reason = siena_map_reset_reason, .map_reset_flags = siena_map_reset_flags, .reset = siena_reset_hw,